• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.475-489
• /
• 2013

This work was conducted to investigate the effect of the addition of binders, such as rapeseed flour, coffee waste, bark, pine cone and lignin powder, on the fuel characteristics of the pellets fabricated with larch and tulip tree sawdust. Moisture content, bulk density and higher heating value of most pellets fabricated with the binders exceeded the 1st-grade pellet standard designated by Korea Forest Research Institute, but ash content of the pellets fabricated with rapeseed flour or bark of 10 wt% on the dry weight basis of sawdust was satisfied with just the 2nd- or 3rd-grade standard. The durability of tulip tree-pellets was positively influenced by the addition of rapeseed flour, coffee waste or lignin powder and increased with increasing the amount of the binders. For larch-pellets, the increase of binders did not greatly affect the durability, and even the durability reduced with the increase of bark or pine cone. From the microscopic observation, the obvious feature of pellet surfaces was not identified by the type of binder but by the addition amount of the binder. In summary, the addition of binders contributed to the fuel characteristics of wood pellets, and particularly the characteristics of wood pellets fabricated with coffee waste improved greatly. Therefore, if the binders are secured sufficiently with a reasonable cost, it might be possible to commercialize wood/binder pellets, which have better fuel characteristics than conventional wood pellets.

• Journal of Mushroom
• /
• v.7 no.3
• /
• pp.105-109
• /
• 2009

Ten to thirty percent of ginko leaf pomace(GLP) were added to pine sawdust to investigate mycelial growth. Mycelial growth on the medium with GLP was 86~101(mm/28 days) and was slower than that of the control without GLP as, 102(mm/28 days). Mycelial growth time on medium of sawdust with 10 to 20% GLP was similar to the control without GLP as 29 days but that on medium with 30% GLP was delayed for 2 days. The time of pinhead formations of sawdust with 10 to 20% GLP was 7 days, the growth time to harvest was 11 days. These results were similar to those of the control without GLP. The sizes of pileus of treatments with 10 to 30% GLP were tend to be smaller compared with the control. The length of stipe of 10% GLP treatment was 98mm which was longer than that of the control with 91mm. The thickness of stipes of 10 to 30% GLP treatments were 45 to 48mm which were tend to be thicker than that of the control with 45mm. The hardness of stipe were 35,062($g/cm^2$) to 4,1065($g/cm^2$)) which were harder than that of the control with 32,156($g/cm^2$)). GLP treatments seem to be favorable to store or distribute. Yields per volume of GLP added treatments were 88.7g to 95.6g, which was increased 3 to 12% compare to 85.8g of the control without GLP.

• Korean Journal Plant Pathology
• /
• v.10 no.4
• /
• pp.261-269
• /
• 1994

One hundred and ninety two isolates of Armillaria were obtained from mycelial fans on infected hosts, rhizomorphs, and single basidiospores or trauma tissue of fruiting bodies. Mating tests showed that two of these isolates were A. mellea, eight were A. tabescens, 20 were A. ostoyae, and 162 were A. gallica. Armillaria ostoyae was mainly isolated from Pinus koraiensis and Qurecus spp., A. tabescens from fruiting bodies on Pinus densiflora and Qurecus spp., and A. gallica from many tree species but not Pinus koraiensis. Armillaria mellea, A. gallica, A. ostoyae and A. tabescens showed distinct protein banding patterns. Mycelial growth and rhizomorph formation was good on basal medium with ethanol added. A. gallica and A. mellea formed many rhizomorphs, but A. ostoyae did not. A. gallica showed the best rhizomorph formation on media with tannic acid and ethanol, but a. mellea formed the most rhizomorphs on gallic acid. Rhizomorphs showed monopodial branching for A. gallica and dichotomous branching for A. ostoyae. Fruiting bodies. formed in the laboratory on sawdust media most abundantly by A. tabescens. In nature, fruit body formation by A. tabescens was from early to mid August. A. ostoyae and A. gallica fruit bodies were formed from early August to late October. While there are common names in Korea for A. mellea and A. tabescens, such as mulberry mushroom relative, no common names are available for A. gallica and A. ostoyae. Therefore, we refer to a. gallica as the Gastrodia mushroom because it has been used to produce Gastrodia and A. ostoyae as the Korean pine mushroom because it is frequently found as mushrooms on Korean pine.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.88-100
• /
• 2006

This study was performed to investigate the effective components of media of Pleurotus eryngii for bottle cultivation and several alternative material for reducing cost and smooth supply. The results show that Potato starch, Cocoa shell, Corn gluten feed, Soybean flour(solvent extracted), Cottonseed hull, Poultry manure can be replaced in Bean curd dregs of basal substrates. Especially addition of Soybean flour at 2~8% and Poulty manure at 2% in place of Bean curd dregs is effective for mycelial growth of P. eryngii, Also Pine sawdust appears that can be replaced by Softwood sawdust and addition of softwood sawdust at 25.2% is most effective. Addition of $CaCO_3$, at 2~3%, $K_2CO_3$, at 0.2%, $MgSO_4{\cdot}7H_2O$ in 0.1%, $MnSO_4{\cdot}5H_2O$ in 0.05% is effective for mycelial growth of P. eryngii, Activation materials used in this study have not enough benefit for mycelial growth in the financial aspect.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.212-216
• /
• 1993

Agricultural and forest wastes were tested as substrate for the production of Flammulina velutipes. Among the meranti, pine tree, mixed sawdust, coffee waste and peanut hull tested, coffee waste was the best basal substrate for the production of basidiocarps. When various supplements, such as ricebran, brewer's grain, defatted corn flour, defatted soybean flour and defatted rapeseed flour were tested, defatted corn flour was chosen for the production of basidiocarps. Maximum yield of basidiocarps(129.38 g/bottle) was obtained from the mixed medium at 4 : 1 ratio of coffee waste and defatted corn flour.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.9-13
• /
• 2007

Using sawdust boards made of pine by differing the percentage of resin impregnation, wood-ceramics were manufactured by carbonizing temperature at $650^{\circ}C$. Their electrical properties and surface temperature were measured by sending an electric current. As electrical resistance of woodceramic was lower, its surface temperature, even in a low voltage, became higher. It seemed to be necessary to applying higher voltage to the woodceramic to raise the surface temperature by target temperature $70^{\circ}C$ or more in this study, according as resistance increased. When the voltage increased, woodceramics showed higher level all in electric current, electric power and surface temperature. Arrival time, electric current and electric power increased with increase of target temperature under constant voltage.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.41-49
• /
• 2022

To abate the environmental burdens arising from CO₂ emissions, biochar offers a strategic means to sequester carbons due to its recalcitrant nature. Also, biochar has a great potential for the use as carbon-based adsorbent because it is a porous material. As such, developing the surface properties of biochar increases a chance to produce biochar with great adsorption performance. Given that biochar is a byproduct in biomass pyrolysis, characteristics of biochar are contingent on pyrolysis operating parameters. In this respect, this work focused on the investigation of surface properties of biochar by controlling temperature and reaction medium in pyrolysis of pine sawdust as case study. In particular, CO₂ was used as reaction medium in pyrolysis process. According to pyrolytic temperature, the surface properties of biochar were indeed developed by CO₂. The biochar engineered by CO₂ showed the improved capability on CO₂ sorption. In addition, CO₂ has an effect on energy recovery by enhancing syngas production. Thus, this study offers the functionality of CO₂ for converting biomass into engineered biochar as carbon-based adsorbent for CO₂ sorption while recovering energy as syngas.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.58-62
• /
• 2008

'Miso', a new variety of oyster mushroom was developed for the bottle culture at the Chungnam Agricultural Research & Extension Services. Its mycelium grew rapidly with $8.4{\sim}8.6\;mm/day $ at $25{\sim}28^{\circ}C$ on PDA medium. The optimum pH of the mycelial growth was pH 5.0. It took 24 days for the primitive primordium formation after inoculation on pine sawdust media mixed with 20% wheat bran. Fruiting body color was white, and the shape of pileus was convex-umbonate. In the bottle culture, the yield was 115.7 g per 850 ml bottle. Stipe length was about 54 mm, the number of stipe per bottle was 18.1, the size of pileus was 28 mm, and gill was crowded. The moisture content of 'Miso' was lower than that of Jangan No.5 and Wonhyeong No.1, and contents of protein, ash and sugar of 'Miso' were higher than those of other varieties, and tannin acid content of 'Miso' was lower than that of others. On the basis of AFLP analysis, the 'Miso' was distinct not only from Wonhyeong No.1, but also from their closest relative, oyster mushrooms.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.45-52
• /
• 1999

This study was conducted to evaluate the effects of microbial inoculation on sewage sludge composting. The number and species of microorganisms in sewage sludge sampled on February were higher than those sampled on August. The composting of sewage sludge is inhibited by the polyacrylamide cation, which was used as a coagulant and known to repress the growth of microorganisms. The growth of all microorganisms was inhibited by the addition of the polyacrylamide cation at a concentration of more than 0.8%. The species and viable counts of microorganisms were observed to increase during composting sewage sludge by inoculation of the effective microorganisms and addition of the pine tree sawdust as a bulking agent, compared with those without inoculation. A variety of organisms in compost(sewage sludge plus sawdust) were observed after composting for 30 days, such as Fragilaria sp., Proales sp., Vorticella sp., Schizothrix sp., Anabaena sp., Zoothaminium sp., Epstylis sp., Arcella sp., Balantidium sp., Actinophrys sp., Synedra sp., Euglypha sp., Ulothrix sp., Anacystis sp., and Clostium sp.