• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.1975-1988
• /
• 2024

It is important to maintain cladding integrity in spent nuclear fuel management. This study proposes a numerical analysis method to evaluate the fracture resistance of irradiated zirconium alloy cladding under pinch load known to cause Mode-III failure. The mechanical behavior and fracture of the cladding under pinch loading can be evaluated by a Ring Compression Test (RCT). To simulate the fracture of hydride precipitates, zirconium matrix, and Zr/hydride interfaces under the stress field generated by RCT, a micro-structure crack propagation simulation method based on Continuum Damage Mechanics (CDM) has been proposed. Our RCT simulation model was constructed from microscopic images of irradiated cladding. In this study, we developed an automated process to generate a pixel-based finite element model by separating the hydride precipitates, zirconium matrix, and interfaces using an image segmentation method. The appropriate element size was selected to ensure the efficiency and accuracy of a crack propagation simulation. The load-displacement curves and strain energies from RCT were compared and analyzed with the simulation results of different element sizes. The finalized RCT simulation model can be used to establish the failure criterion of fuel rods under pinch loading. The advantages and limitations of the proposed method are fully discussed here.

• 한국치위생학회지
• /
• 제13권1호
• /
• pp.114-121
• /
• 2013

Objectives : The purpose of the research is to measure Dental Hygiene students' level of musculoskeletal pain before and after receiving scaling training which involves repetitive operations and examine effects the operations have on the students' grip and pinch strength. Methods : 15 subjects in Dental Hygiene at Y university located in Chungbuk were tested on November 2, 2011. Results : 12 students had a musculoskeletal pain before receiving scaling training. However, all the 15 students had a musculoskeletal pain after the training. Body part the largest number of the students complained of the pain on was shoulders(37.9%) followed by neck(20.8%), waist(13.9%), wrists(10.3%), then back(6.9%) before receiving the training. Then the result showed that shoulders are where the largest number of students(24.1%) felt the pain, followed by neck(17.2%), wrists and fingers(13.8%), waist(12.1%), back and lower arms(6.9%), then palms(5.2%) after the training. Visual Analogue Scale(VAS) increased to $6.35{\pm}2.09$ after receiving the training from $3.31{\pm}3.38$ and this shows statistically significant difference(p<.001). Upon inspection, average grip strength decreased to $23.23{\pm}5.79kg$ from $25.00{\pm}4.51kg$ after receiving the training and this shows statistically significant difference(p<.05). Key pinch was the strongest among the three pinch strengths followed by tripod pinch then tip pinch. Average of all the three pinch strengths showed to have statistically significant difference before and after the training(p<.05); Tip pinch from $6.53{\pm}1.36$ to $5.87{\pm}1.3$, key pinch from $13.47{\pm}2.5$ to $12.53{\pm}2.30$, and tripod pinch from $9.27{\pm}3.04$ to $8.03{\pm}2.72$. Conclusions : The result showed that scaling training has effects on Dental Hygiene students' musculoskeletal subjective symptoms and their grip and pinch strength changes after receiving the training.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.371-377
• /
• 2008

In order to obtain fundamental knowledge of atomization, the three dimensional unsteady phenomenon of pinch off was numerically studied by developed method. Not only liquid shapes but also velocity distributions of numerical results were compared with corresponding experimental ones. They showed satisfactorily good agreement at least in a qualitative sense. The liquid jet shapes, the pressure and velocity distributions, and the inner flow structures were clarified through the comparisons of distinctly different flow fields due to presence or absence of surface tension. The condition of pinch off, which had close correlation with fluid acceleration at injection, was clearly specified.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.44-51
• /
• 2005

Paper mills use and discharge lots of water. And so now the papermaking industry could be classified into major water consuming industry In order to analyze the process water network and to establish the mass, water balance of duplex board mill, computer aided simulation was made using water pinch method. Based on the pinch analysis results, reuse of process water, after regenerating by microfilter as much as $140\;m^3/hr$, could be suggested without significant accumulation of contaminants in process water. According to this suggestion about $3000\;m^3/day$ of recycled process water could be sub stituted by regenerated water and consequently $30\%$ of energy cost is expected to be reduced.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.476-483
• /
• 2016

해양온도차발전용 유기랭킨사이클은 해양의 표층수와 심층수사이의 온도차를 이용하여 발전하는 사이클이다. 작동유체는 유기랭킨사이클의 열역학적 성능에 있어 중요한 요소이다. 유기랭킨사이클의 열역학적 분석방법으로 핀치포인트분석이 있다. 본 연구는 열교환기내 핀치포인트온도차의 변화와 열원 및 열침의 출구온도의 변화에 따른 열역학적 성능분석을 수행하였다. 핀치포인트분석법에 따라 설계한 해양온도차발전용 단순랭킨사이클에 7종의 단일 작동유체를 적용하여 열역학적 성능을 분석하였다. 성능분석결과 열교환기에서 핀치포인트온도차와 열원 및 열침의 온도변화가 작을수록 사이클 총 비가역성 및 총 엑서지 파괴인자가 감소하였으며, 제2법칙 효율은 상승하였다. 또한 비가역성은 열역학적 변화가 발생한 곳에서 크게 변화하였다. RE245fa2는 선정한 작동유체 중에서 가장 우수한 열역학적 성능을 보여주었으며, 모든 작동유체의 성능은 유사하였다. 열교환기 및 작동유체 선정에 있어 열역학적 성능과 함께 다양한 요소들에 대해서도 엄밀한 이론적 근거가 필요하다.

• 근관절건강학회지
• /
• 제9권1호
• /
• pp.18-27
• /
• 2002

Introduction : Exercise has been suggested as an important nursing strategy in which to help elderly maintain functional performance and to enhanced quality of life. Most of exercise study has been reported on fitness exercise such as walking, swimming, dance etc for health of elderly. There have been few reports about exercise on the promotion of small and fine movement of elderly. The purpose of this pilot study was to determine an effect of 6 weeks hand and finger exercise in home to improve hand muscle strength such as grip strength and finger pinch pressure. Materials and Methods Design: This pilot study was used one group pre and post-test design. Sample: Twelve elderly women above 60 years of age or older living in community were selected by convenient sampling. Procedure: Signed informed consent was obtained prior to participate in this study. The authors met elderly and taught hand and finger exercise, daily a week for 6 weeks, within 30 minutes per session. But exercise frequency and strength were not same. Instruments: Left and right grip strength were measured by Bulb Dynamometer(made in USA) and left and right pinch pressure were measured by Baseline Hydraulic Pinch Gauge(made in USA). Data analysis: Discriptive data analyses were performed on all variables. Wilcoxon matched-pairs Signed-Ranks test were used to find difference of grip strength and pinch pressure between pre and post exercise using SPSS 10.0 for Window. Results: Samples age ranged from 60 to 73, Mean age was 65.3. All were women. Ten elderly were diagnosed osteoarthritis and one had DM. After six weeks hand and finger exercise, Left and right grip strength were higher than those of before exercise(Z=-2.667, P<0.01 ; Z=-3.065, p<0.01). And left pinch pressure after hand and linger exercise were higher than that of before pinch pressure (Z=-2.315, p<0.05). But Right pinch pressure was not shown significant change(Z=-1.099, p>0.05). Conclusions: Although this study was limited by the sample size and design, the findings provide some important implications for community based exercise nursing intervention. Short term (six weeks) exercise of hand and linger is shown to be useful as nursing intervention to maintain routine daily activities such as eating, writing, grip something for elderly.

• 대한인간공학회지
• /
• 제15권2호
• /
• pp.139-147
• /
• 1996

It is known fact that the CTS patients have lower pinch strength than the normal people. And we can assume that the sensory nerve action potential(SNAP) and the nerve conduction velocity(NCV) of the CTS group are lower or slower than the normal subjects. This paper analysed the grip strength and performed EMG experiment for the group Norm, G1 and G2. The results are as follows: 1) CTS patients have lower pinch strength than normal people. 2) There was no significant difference on SNAP between the CTS group and the normal group. 3) There was significant difference on NCV among Norm, G1, and G2 group. Especially, significant level was higher in the evening after the continuous use of wrist.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.88-93
• /
• 2009

While the pinch instability theory (PIT) has been widely employed to analyze the spray transfer mode in the gas metal arc welding (GMAW), it cannot predict the detaching drop size accurately. The PIT is modified in this work to increase the accuracy of prediction and to simulate the molten tip geometry to be more physically acceptable. Since the molten tip becomes a cone shape in the spray mode, the effective wire diameter is formulated that the effective diameter is inversely proportional to current square. Modifications are also made to consider the finite length of the liquid column and current leakage through the arc. While the effective diameter influences drop transfer significantly, the current leakage has negligible effects. The effects of modifications on drop transfer are analyzed, and the predicted drop diameters show good agreements with the experimental data of the steel wire.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.44-44
• /
• 2009

While the pinch instability theory (PIT) has been widely employed to analyze the spray transfer mode in the gas metal arc welding (GMAW), it cannot predict the detaching drop size accurately. The PIT is modified in this work to increase the accuracy of prediction and to simulate the molten tip geometry to be more physically acceptable. Since the molten tip becomes a cone shape in the spray mode, the effective wire diameter is formulated that the effective diameter is inversely proportional to current square. Modifications are also made to consider the finite length of the liquid column and current leakage through the arc. While the effective diameter influences drop transfer significantly, the current leakage has negligible effects. The effects of modifications on drop transfer are analyzed, and the predicted drop diameters show good agreements with the experimental data of the steel wire.

• The Journal of Korean Physical Therapy
• /
• 제32권4호
• /
• pp.198-202
• /
• 2020

Purpose: This study examined the effects of a paraffin treatment with exercise on the muscle strength and fatigue of the hand according to the use of smartphones. Methods: The measurement subjects were 30 healthy males in their 20s who were divided randomly into the control and paraffin treatment groups. A typing exercise using a smartphone was performed. The pinch grip force was measured to evaluate the muscle strength of the thumb, and muscle fatigue analysis using electromyography was performed to analyze muscle fatigue. Results: The functional changes to the arm and the fatigue of the hand through the use of a smartphone were examined to determine the effects of the paraffin treatment. The dominant hand-pinch grip force test did not show a significant difference, but the non-dominant hand-pinch grip force test showed a significant difference between the groups (p=0.030). In the dominant hand fatigue test, there was a significant difference between the groups (p=0.037). In the non-dominant hand, there was a significant difference between time (p=0.012) and the groups (p<0.001). Conclusion: The effects of paraffin intervention on the hand muscle strength and fatigue due to repeated use of the smartphone were confirmed. These results can be used as a basis for clinical use and can be a guide for the correct use of smartphones, which are essential in modern life.