• Journal of Ocean Engineering and Technology
• /
• v.1 no.1
• /
• pp.73-83
• /
• 1987

한국형 해저원유 초기생산 시스템은 제주도 남쪽의 한.일 공동개발구역 및 이와 유사한 조건의 지역에서 소규모 유전이 발견되었을때, 빠른 시간내에 저렴한 초기투자비로 석유를 생산할 수 있도록 개발되었다. 이 시스템은 원유저장용 선박, tower, yoke, gravity base 및 원유처리장치들로 구성되어 있으며 각 구조믈들은 pin 또는 universal joint들로 연결되어있다. 본 구조물의 파도중에서의 동적거동은 전산 program을 이용하여 구하여 wave tank에서 수행된 실험의 결과와 비교, 검토하였다. 그리고 이들 결과를 이용하여 구조적 안전성을 검토하였으며, 설계, 해석 및 model test의 결과들은 선급협회의 승인을 받았다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2010

The thickness of original hinge model is changed for structural stability in this study. The front end with the largest deformation of 9.8813 mm or the rear middle part with the largest equivalent stress of 6082.6 MPa is respectively shown at door hinge. The lower part of joint pin head with the largest deformation of 0.17499 mm and the largest equivalent stress of 1540.2 MPa are shown. The advanced model with more thickness and stability is shown to have smaller displacement in half and smaller equivalent stress by 3 times by comparing with the original model.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.164-166
• /
• 2001

An eight-month old female mixed breed dog was presented to the at Gyeongsang National University Animal Hospital, for tarsocrural arthrodesis. Previously the dog had been presented to a local animal clinic. Orthopedic and blood examinations were conducted. There was absent response of conscious proprioception on the right tarsocrural articulation. The dog stood knuckled onto the digits and had hock dropped but showed normal values in WBC, RBC, Hb, PCV, BUN, creatine, glucose, cholesterol, AST and ALT analyses. The dog was anesthetized and prepared for aseptic surgery. Steinmann pin and Joshi external fixators were applied(bilaterally). 11 weeks after the operation, the external fixators were removed from the bones. The hock dropped was well stabilized, but mild knuckling of distal metatarsopharangeal joint was remained.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.27-36
• /
• 2000

The Oktalok nodal connection system is an aesthetic and efficient system. It has been widely used throughout Australia. The paper will briefly introduce the concept and application of the Oktalok nodal system. The existing design method is based on the assumption that the joints are pin-ended, i.e., the rotational stiffness of the joints is zero. However the ultimate capacity of the frame may increase significantly depending on the rotational stiffness of the joints. Stiffness tests and finite element simulations were carried out to determine the rotational stiffness of the Oktalok joints. Column buckling tests and non-linear finite element analyses were performed to determine the member capacity of columns with semi-rigid end conditions. A simple formulae for the effective length factor of column buckling is derived based on the above experimental and theoretical investigations.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.535-540
• /
• 2000

When the stud connection is considered as pin joint in the practical design, it is required to have high deformability. The rotational capacity as well as moment of the connection are evaluated through experimental works. Considered in the test are the reinforcement ratios of concrete member, the magnitude of axial force and connection details. It is shown that the stud connection has some quantity of moment capacity buy on the other hand it has low deformability. The strength and deformability of the connection depend on the axial force and reinforcements around the studs. The strength and ductility of the connection ate increased by using closed C-type.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2019

Bucket trajectory is crucial regarding precision work with an excavator. In general, the bucket trajectory deviation is determined by the machining deviation of the frame, driving deviation of the driving hydraulic cylinder, clearance in the joints, and deformation of the structure. This paper investigated the relationship between the respective clearance in joints and the trajectory deviation of the bucket at the finishing work of the ditching for a 20-ton excavator. As a result, the larger the clearance, the larger deviation is increased at trajectory. However, it was found that the deviation of the rotation angle and displacement of the bucket was limited and the size of clearance does not affect closely on the contact angle of the pin shaft.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2011

Hydraulic excavator in digging at the construction machinery is a widely used mechanical device. Excavator attachments are taken with structural load and fatigue during digging under applied reaction. Fatigue analysis is done at joint pin between bucket and arm of front attachment at excavator under the force of hydraulic cylinder in operation. It is analyzed how load can be supported at the lower driving body applied on the bucket. In this study, the deformation of arm and the fatigue result are examined when reaction force is applied on the attachment of excavator.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.234-243
• /
• 1998

In this paper, thermite and gas pressure weldings have been used to join rails in-track and analyzed as functions of hardness and wear characteristics. The wear rate of thermite welded rail is low compared with that of gas pressure welded rail, which is tested in a pin-on-disk wear tester. The hardness of thermite welded materials is relatively high and narrow distributed between three zones, welded part, thermally affected zone, and a base matrix. Wear of a welded rail may be a major factor in railroad maintenance costs and failures at the rail-rail butt joint.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.135-137
• /
• 2005

The body of the work covers FSW welding of Al6061 and its thermal distribution based on an analytical model for the heat input at the probe/matrix boundary of Al plates and FSW tool due to the effect of combined translation and rotational motion of the tool pin and shoulder. Finally the 2D- finite element heat transfer analysis program has been used to plot the heat distribution at the Friction Stir Welded joint in Al 6061 plate. The work concludes that the heat distribution result obtained from FE analysis has a reasonable agreement with the experimentally measured values.