• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.532-545
• /
• 2022

In-depth convergence analyses for neutronics/thermal-hydraulics (T/H) coupled calculations are performed to investigate the performance of nonlinear methods based on the Fixed-Point Iteration (FPI). A simplified neutronics-T/H coupled system consisting of a single fuel pin is derived to provide a testbed. The xenon equilibrium model is considered to investigate its impact during the nonlinear iteration. A problem set is organized to have a thousand different fuel temperature coefficients (FTC) and moderator temperature coefficients (MTC). The problem set is solved by the Jacobi and Gauss-Seidel (G-S) type FPI. The relaxation scheme and the Anderson acceleration are applied to improve the convergence rate of FPI. The performances of solution schemes are evaluated by comparing the number of iterations and the error reduction behavior. From those numerical investigations, it is demonstrated that the number of FPIs is increased as the feedback is stronger regardless of its sign. In addition, the Jacobi type FPIs generally shows a slower convergence rate than the G-S type FPI. It also turns out that the xenon equilibrium model can cause numerical instability for certain conditions. Lastly, it is figured out that the Anderson acceleration can effectively improve the convergence behaviors of FPI, compared to the conventional relaxation scheme.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2670-2689
• /
• 2022

STREAM - a lattice transport calculation code with method of characteristics for the purpose of light water reactor analysis - has been developed by the Computational Reactor Physics and Experiment laboratory (CORE) of the Ulsan National Institute of Science and Technology (UNIST). Recently, efforts have been taken to develop a photon module in STREAM to assess photon heating and the influence of gamma photon transport on power distributions, as only neutron transport was considered in previous STREAM versions. A multi-group photon library is produced for STREAM based on the ENDF/B-VII.1 library with the use of the library-processing code NJOY. The developed photon solver for the computation of 2D and 3D distributions of photon flux and energy deposition is based on the method of characteristics like the neutron solver. The photon library and photon module produced and implemented for STREAM are verified on VERA pin and assembly problems by comparison with the Monte Carlo code MCS - also developed at UNIST. A short analysis of the impact of photon transport during depletion and thermal hydraulics feedback is presented for a 2D core also from the VERA benchmark.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3930-3943
• /
• 2021

To improve the capability of the SAS4A code, which simulates the initiating phase of core disruptive accidents for MOX-fueled Sodium-cooled Fast Reactors (SFRs), the authors have investigated in detail the physical phenomena under unprotected loss-of-flow (ULOF) conditions in a previous paper (Kawada and Suzuki, 2020) [1]. As the conclusion of the last article, fuel stub motion, in which the residual fuel pellets would move toward the core central region after fuel pin disruption, was identified as one of the key phenomena to be appropriately simulated for the initiating phase of ULOF. In the present paper, based on the analysis of the experimental data, the behaviors related to the stub motion were evaluated and quantified by the author from scratch. A simple model describing fuel stub motion, which was not modeled in the previous SAS4A code, was newly proposed. The applicability of the proposed model was validated through a series of analyses for the CABRI experiments, by which the stub motion would be represented with reasonable conservativeness for the reactivity evaluation of disrupted core.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.67-82
• /
• 2023

Linear array imaging sensors are widely used in remote sensing satellites. The final products of an imaging sensor can only be used when they are geometrically, radiometrically, and spectrally calibrated. Therefore, at the first stages of sensor design, a detailed calibration procedure must be carefully planned based on the accuracy requirements. In this paper, focusing on inherent optical distortion, a step-by-step procedure for laboratory geometric calibration of a typical push-broom satellite imaging sensor is simulated. The basis of this work is the simulation of a laboratory procedure in which a linear imager mounted on a rotary table captures images of a pin-hole pattern at different angles. By these images and their corresponding pinhole approximation, the correction function is extracted and applied to the raw images to give the corrected ones. The simulation results illustrate that using this approach, the nonlinear effects of distortion can be minimized and therefore the accuracy of the geometric position of this method on the image screen can be improved to better than the order of sub-pixel. On the other hand, the analyses can be used to proper laboratory facility selection based on the imaging sensor specifications and the accuracy.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4272-4279
• /
• 2022

In this study, a cross section stochastic sampling (S.S.) capability is implemented into both the McCARD continuous energy Monte Carlo code and MIG multiple-correlated data sampling code. The ENDF/B-VII.1 covariance data based 30 group cross section sets and the SCALE6 covariance data based 44 group cross section sets are sampled by the MIG code. Through various uncertainty quantification (UQ) benchmark calculations, the McCARD/MIG results are verified to be consistent with the McCARD stand-alone sensitivity/uncertainty (S/U) results and the XSUSA S.S. results. UQ analyses for Three Mile Island Unit 1, Peach Bottom Unit 2, and Kozloduy-6 fuel pin problems are conducted to provide the uncertainties of k_eff and microscopic and macroscopic cross sections by the McCARD/MIG code system. Moreover, the SNU S/U formulations for uncertainty propagation in a MC depletion analysis are validated through a comparison with the McCARD/MIG S.S. results for the UAM Exercise I-1b burnup benchmark. It is therefore concluded that the SNU formulation based on the S/U method has the capability to accurately estimate the uncertainty propagation in a MC depletion analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2862-2882
• /
• 2023

With the development of networking technology, it has become common to use various types of network services to replace physical ones. Among all such services, electronic voting is one example that tends to be popularized in many countries. However, due to certain concerns regarding information security, traditional paper voting mechanisms are still widely adopted in large-scale elections. This study utilizes blockchain technology to design a novel electronic voting mechanism. Relying on the transparency, decentralization, and verifiability of the blockchain, it becomes possible to remove the reliance on trusted third parties and also to enhance the level of trust of voters in the mechanism. Besides, the mechanism of blind signature with its complexity as difficult as solving an elliptic curve discrete logarithmic problem is adopted to strengthen the features related to the security of electronic voting. Last but not least, the mechanism of self-certification is incorporated to substitute the centralized certificate authority. Therefore, the voters can generate the public/private keys by themselves to mitigate the possible risks of impersonation by the certificate authority (i.e., a trusted third party). The BAN logic analysis and the investigation for several key security features are conducted to verify that such a design is sufficiently secure. Since it is expected to raise the level of trust of voters in electronic voting, extra costs for re-verifying the results due to distrust will therefore be reduced.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.533-536
• /
• 2005

[ ${\beta}$-Cryptoxanthin ] contents were determined from Citrus unshiu Markovich fruits grown in a greenhouse and open field of Jeju Island, off the southern coast of Korea. In a greenhouse and open field, the ${\beta}$-cryptoxanthin content in the peel was greatly increased by harvesting citrus fruits in the late season from August through November. However, ${\beta}$-cryptoxanthin content in the flesh was gradually increased and was superior to that of the citrus fruits grown in a greenhouse. ${\beta}$-Cryptoxanthin was efficiently purified from the flesh of citrus fruits harvested in the late harvesting season in November. The ${\beta}$-cryptoxanthin contents in the peel and flesh of citrus fruits harvested from a greenhouse in November were 0.89 mg% and 0.35 mg%, respectively, and in that obtained from an open field were 1.12 mg% and 0.35 mg%, respectively.

• Molecules and Cells
• /
• v.20 no.1
• /
• pp.97-104
• /
• 2005

To investigate apoptosis in HC11 mammary epithelial cells, we compared the gene expression profiles of actively growing and serum-starved apoptotic cells using a mouse apoptosis gene array and $^{33}P$-labeled cDNA prepared from the RNA of the two cultures. Analysis of the arrays showed that expression of several genes such as clusterin, secreted frizzled related protein mRNA (sFRP-1), CREB-binding protein (CBP), and others was higher in the apoptotic cells whereas expression of certain genes including survivin, cell division cycle 2 homolog A (CDC2), and cyclin A was lower. These expression patterns were confirmed by RT-PCR and/or Northern analyses. We compared the expression of some of these genes in the mouse mammary gland under various physiological conditions. The expression levels of genes (clusterin, CBP, and M6P-R) up-regulated in apoptotic conditions were higher at involution than during lactation. On the other hand, genes (Pin, CDC2) downregulated in apoptotic conditions were relatively highly expressed in virgin and pregnant mice. We conclude that certain genes such as clusterin, sFRP-1, GAS1 and CBP are induced in apoptotic mammary epithelial cells, and others are repressed. Moreover, the apoptosis array is an efficient technique for comparing gene expression profiles in different states of the same cell type.

• Tribology and Lubricants
• /
• v.21 no.5
• /
• pp.216-220
• /
• 2005

The sliding wear behaviors of three different compositions of novel low temperature degradation-free zirconia/alumina (LTD-free Z/A) composites were examined in a ceramic-ceramic contact pair. The wear tests were performed by using a pin-on-disk type wear tester in a linear reciprocal sliding motion with a line contact in both dry and bovine serum lubricated conditions at room temperature. From the results of dry sliding wear tests, Z/A#1((5.3Y, 4.6Nb)-TZP/80 $vol\%Al_2O_3$) showed the best wear resistance among three kinds of LTD-free Z/A composites. For the bovine serum lubricated sliding wear tests, wear was too little to be measured for all kinds of Z/A composites. These novel LTD-free Z/A composites having excellent wear resistance demonstrated a potential as the alternative materials for the ceramic-ceramic contact pairs of femoral head and acetabular liner in total hip replacement.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.354-357
• /
• 2009

The effect of texture of an extruded OFHC Cu rod on its sliding wear has been explored. Disk specimens with three different orientations were machined from the Cu rod for the wear test; surfaces of the disk were perpendicular ($0^{\circ}$), inclined with a specific angle ($45^{\circ}$), and parallel ($90^{\circ}$) to the extrusion axis of the rod. The texture was analyzed using an X-ray goniometer by measuring {111}, {200}, and {220} pole figures of each specimen. The analyzed texture was correlated with wear-test results of the Cu specimen. Dry sliding wear tests were performed at room temperature using a pin-on-disk wear tester against an Al2O3 ball. Applied load, sliding distance, sliding speed were fixed as 20 N, 200 m, and 0.5 m/sec, respectively. The $45^{\circ}$-inclined (to the extrusion axis) disk specimen showed the lowest wear resistance with the least data scatters. It has been found that distribution of cube texture strongly influences wear rate of the extruded Cu rod.