• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.220-226
• /
• 1994

본 연구에서는 폴리에스터(PET) 필름 위에 아연을 연속적으로 진공증착하는 실험을 수행한 후 얻어진 박막의 조직 및 조성을 SEM 및 AES로 조사하였다. 박막의 X-선 회절부석 결과, 2$ heta$=36。에서 아연의(0002)면이 주피크로 나타났으며 투과전자 현미경 관찰 결가 hcprn조로 증착시 basal plane인 (0001)면에 평행한 방향으로 우선 성장한다. 대기중 노출시 증착필름은 수분 및 산소와 반응하여 매우 다공성이며 부착성이불량한 산화피막을 형성하기 때문에 1차피막형성 후에도 산화가 지속적으로 진행되 었다. 박막내 존재하는 산소의 농도는 내부로 갈수록 지수함수적으로 감소하다가 증착금속과 기판간의 계면에서 다시 증가하는 경향을 보인다. 박막의 부식 특성을 조사현 결과 균일한 산화막 형성과 더불어 수분 존재하에 아연충에 미세한 pin hole 이 공극 부분부터 형성되어 개수가 증가하며 주위로 확장되는 형태를 나타내고 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.190-193
• /
• 2001

ZnO varistors have been widely used to protect power system and electronic system against overvoltages based on their excellent nonlinearity. In order to increase their protection capability, the fracture and protection technologies of arresters have to study according to their applications, namely ImA DC voltage, leakage currents, impulse residual voltages, withstanding capability to impulse surge, and energy absorption capability. ZnO varistors which have nonlinear current-voltage characteristic name a number of failure mechanism when ZnO elements absorb surge energies. Failure mode by thermal stress and Pin hole are among the most common failure mechanism at the high current surge current. In this study, the fracture mechaism of power arresters are introduced and protection technologies are researched. In particular the effect of thermal stress by surge currents to ZnO elements and methods against arc surge energy through withstand structure design of arrester are discussed.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.886-888
• /
• 2001

배관의 덴트 및 주름의 형태 크기와 위치, buckle의 여부와 위치, 배관의 난형도 및 곡률을 파악하기 위해서 사용되는 Gemometry PIG의 캘리퍼 시스템에 Mechanical Finger를 back-yoke의 유무, 영구자석의 크기, Pin Hole의 위치와 영구자석의 위치 등을 3차원 비선형 유한요소법으로 해석한 후 이를 바탕으로 최적설계를 하여 이를 실제 제작하여 측정치와 비교하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.579-583
• /
• 2012

We have designed the small particle detection system. The scatteing effect of light was used to detect small particle. The fabricated system consisted of laser diode, lens, pin hole, and photo detector. The aperture, lens, and photo detector were optimized to improve the performance of detection system. The fabricated detection system detected the scattered light by small particle entering into detection system and its response time was fast.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.76-77
• /
• 2014

Stone is one of the oldest and most popular materials used on the external wall because of its durability, abundance and aesthetic effect. However, there are two main problems in the existing pin hole construction method. One is uniformity of construction quality, and the other is a repair work of stone panels. Therefore, a new method is needed to overcome these problems. This paper presents a new stone curtain wall system using under cut anchor and secondary holes that was developed by authors. The improved quality and reduction of construction period can be obtained by this system.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.135-140
• /
• 2007

In this study we settled the trouble of the MgO board of existence by this research. We changed the wooden one of the main ingredient of a board to a perlite and a mineral particle in the aluminum hydroxide group and proceeded with a study to physical character and fire resistance efficiency improvement. The result yellowing phenomenon could be improved and it was possible to reduce size decrease of pin hole and the frequency of occurrence. We found out that the in case of absorbed amount added 5~8% corresponding to the weight decreases the acrylic group emulsion suddenly. So this product is improved with the bending strength and water-resistance. After behavior stop time measurement of a mouse for experiments was measured at the time of a gas harmful effect test, an improved MgO board appeared more highly for an average of 138 seconds compared with a board of existence.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.285-288
• /
• 2004

탄화규소 기판의 에피 박막결함으로는 dislocation, micropipe, pin-hole 및 에피층 표면의 여러 가지 결함들이 있다. 이러한 결함들이 탄화규소 쇼트키 다이오드의 항복전압과 어떠한 상관관계가 존재하는지 알아 보기 위해 탄화규소 쇼트키 다이오드를 제작하고, 제작된 소자의 항복전압을 측정하였다. 에피 박막내의 결함 분포를 알아보기 위해 항복전압 측정후 KOH 용액을 이용한 SiC의 에칭을 수행하였으며, 제작된 여러소자들에 대해 항복전압의 분포도와 결함 분포도를 작성, 비교 관찰하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.727-730
• /
• 2001

In many structures a common method of construction is to make use of bolted or riveted joints. With this type of joint the load is transmitted through a pin from one section of the structure to another. Fatigue cracks often start from the edges of holes, due to local stress concentration. In order to predict the fatigue crack growth, the stress intensity factor K for hole-edge cracks should be available. In this paper the stress intensity factors are computed for cracks in bolt-joint region considering the contact condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.785-790
• /
• 2000

The resonant frequency of a gas-filled cylindrical Helmholtz resonator in a liquid is obtained analytically. The equation of motion of the resonator is derived by using the condition of equilibrium of forces acting on the mass in the neck of the resonator. The reaction force on the upper side of the cylinder due to the acceleration of external fluid and sound radiation is obtained by using the analytical results for the baffled circular-piston problem. From the frequency response function of the resonator, a formula to predict the resonant frequency of the resonator is derived. It is shown that the resonant frequency of the Helmholtz resonator significantly decreases due to the cushioning effect of gas inside the cavity. Therefore, when a pressure transducer is to be installed in a pin-hole type mounting method, much care should be paid to remove the gas from the cavity.