• Korean Journal of Food Science and Technology
• /
• v.49 no.5
• /
• pp.507-512
• /
• 2017

The physicochemical properties of maize starch sonicated at various amplitudes (100, 200, and 300 W) and times (10, 30, and 50 min) were examined. The amount of enzyme-susceptible starch increased marginally after sonication. Sonication increased the amount of oil absorbed in the starch although the degree of oil absorption decreased with an extension of the sonication time, implied that different types and extent of damages occurred. Scanning electron microscopy revealed that ultrasound sonication did not form pores on the surfaces, but caused damages such as depression and erosion. Pasting viscosity of starch decreased with an increase in the severity of sonication conditions because of the weakened polymer network. X-ray diffraction suggested that the crystalline domains in starch were not susceptible to sonication and were more resistance to degradation. Sonicated starch formed more pin-holes on the surfaces in the initial glucoamylase reaction; subsequently, as the reaction proceeded, porous starch with enlarged pores was formed and finally, disrupted granular fragments were observed.

• Microbiology and Biotechnology Letters
• /
• v.35 no.3
• /
• pp.203-209
• /
• 2007

Soybean milk cake (SMC) was used for the solid-state fermentation by Bacillus subtilis PUL-A isolated from soybean milk cake. In the presence of 5% glutamate the maximum production of biopolymer (59.9 g/kg) was performed by fermentation at $42^{\circ}C$ for 24 hr. The recovered biopolymer was consisted of 87% $\gamma$-polyglutamic acid with molecular weight of $1.3{\times}10^6$ dalton and other biopolymer. The biopolymer solution showed the great decrease in consistency below pH 6.0, regardless of the molecular weight of PGA. Biopolymer solution has a typical pseudoplastic flow behavior and yield stress. The consistency of biopolymer solution was greatly decreased by increasing heating time and temperature in acidic condition compared to the alkaline condition. In kaolin clay suspension, the flocculating activity of biopolymer was the highest value with 15 mg/L biopolymer and 4.5 mM $CaCl_2$, but decreased greatly with $FeCl_3$. The flocculating activity of biopolymer was maximum at pH5, but decreased drastically by heating at $60{\sim}100^{\circ}C$. In particular, biopolymer with native PGA showed the efficient flocculating activity compared to that of modified biopolymer containing low molecular weight of PGA.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1070-1076
• /
• 2007

Soymilk cake (SMC) fortified with defatted soy flour was fermented by a novel Bacillus subtilis GT-D in the solid-state fermentation with chlorella, mulberry leaves or green tea as food ingredient. The fermentation of SMC resulted in higher content of tyrosine and higher activities of protease, amylase and fibrinolytic enzymes. Fermented SMC including mucilage indicated six-fold higher content of dietary fiber compared to that of non-fermented SMC. The SMC fermented without additional ingredient allowed the highest spread ratio and width of cookies. Cookies prepared without SMC showed the lowest value of spread ratio and width compared to those of fermented SMC. In addition, these cookies showed the highest hardness value of 8,975 g, and thickness value of 5.97 and slightly higher bright color. Cookies fortified with SMC fermented with chlorella or mulberry leaves showed higher sensory evaluation value. Fortification of SMC fermented without additional ingredient resulted in the highest preference in the sensory evaluation of cookies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.450-457
• /
• 2011

Roasted soybean flour (RSF) and mixed cereals were fermented by the solid state fermentation using Bacillus subtilis HA to optimize the production of biologically active compounds. The RFS fermented with 52.7% moisture content showed higher production with protease activity of 42.6 unit/g and 10% mucilage content after fermentation for 24 hr. Tyrosine content and protease activity after 48 hr fermentation time were the highest values with 445.5 mg% and 55.1 unit/g, respectively. However, the wholesome fermented RSF (FRSF) was obtained by fermentation for 24 hr because of the production of unpleasant flavors after fermentation for 48 hr. The RSF fermented with various types and contents of cereals has no effects on tyrosine content and protease activity. However, the addition of brown rice significantly increased mucilage content, especially indicating 24.55% at the addition of 80% (w/w). For addition of barley, fibrinolytic activity was increased to 11.82 unit/g by the fortification of 60% barley. It is concluded that biologically active compounds including fibrinolytic activity and mucilage content in FRSF were dependent upon the type and content of various cereals.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.84-95
• /
• 2001

Titanium is widely used in dentistry for its low density, high strength, fatigue resistance, corrosion resistance, and biocompatibility. But it has a tendency of surface damage under circumstance of friction and impact for its low hardness of the surface. Coating is one of methods fir increasing surface hardness. Its effect is to improve surface physical characteristics without change of titanium. Diamond-like carbon and titanium nitride are known for its high hardness of the surface. So that this study was aimed at the wear test and the cytotoxicity test of the commercially pure titanium and Ti-6Al-4V alloy which were deposited by diamond-like carbon film or titanium nitride film to acertain improvement of the surface hardness and the biocompatibility. A disk (25mm diameter, 2mm thickness) was made of commercially pure titanium and Ti-6Al-4V alloy and these substrates were deposited by diamond-like carbon film or titanium nitride film. Diamond-like carbon film was deposited by the method of radiofrequency plasma assisted chemical vapor deposition and titanium nitride film was deposited by the method of reactive arc ion plating. Then these substrates were tested about wear characteristics by the pin-on-disk type wear tester in which ruby ball was used as a wear causer under the load of 32N, The fracture cycles were measured by rotating the substrates until their films were fractured. The wear volume was measured after 150 cycles and 3,000 cycles using surface profiler. The cytotoxicity test was peformed by the method of the MTT assay. The results were as follows : 1. In the results of the wear volume test, commercially pure titanium and titanium alloy which were coated by diamond-like carbon film or titanium nitride aim had higher resistance against wear than the substrates which were not coated by any films (P<0.05). 2. In the results of the fracture cycle test and the wear volume test, diamond-like carbon film had higher resistance against wear than titanium nitride film (P<0.05). 3. In both coatings of diamond-like carbon aim and titanium nitride film, Ti-6Al-4V alloy had higher resistance against wear than commercially pure titanium (P<0.05) 4. In the results of the cytotoxicity test, diamond-like carbon film and titanium nitride film had little cytotoxicity as like commercially pure titanium or Ti-6Al-4V alloy (P>0.05).

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.228-234
• /
• 1984

A partial hydrolysis of soybean protein isolate was carried out by using pepsin and trypsin. The degree of hydrolysis was evaluated by chemical analysis, viscometric measurements and gel electrophoresis. The functional properties of the hydrolyzates such as flow behavior, emulsion properties and foaming properties were evaluated. A selective hydrolysis of 11S protein fraction by pepsin was observed from the SDS-PAG electrophoresis. The changes in the molecular weight distribution by different conditions of enzyme hydrolysis were evaluated. The changes in the intrinsic viscosity of the protein hydrolylate by reaction time were highly correlated to the contents of TCA soluble protein and 0.03 M $CaCl_2$ soluble nitrogen. The degree of hydrolysis ($DH_{TCA}$, $DH_{Ca}$) were used to evaluate the effect of enzyme treatment on the functional properties of the hydrolyzate. The apparent viscosity and emulsion capacity and stability of the protein solution decreased as DH increased, while the foaming capacity increased linearly with the increasing DH.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.447-451
• /
• 2012

In order to investigate the efficacies for cognitive function of edible plants, we measured the inhibitory effects of acetylcholinesterase(AChE) activity, radical scavenging activities, and the contents of GABA and glutamate in the plant extracts. Among the plant extracts, Schizandra chinensis contained the highest GABA 14.8 mg/g and the extracts of Cnidium officinale and Polygonum multiflorum also had a relatively high GABA. On the other hand, plant extracts except, Acorus gramineus, showed similar glutamate contents. S. chinensis, Hovenia dulcis, Thuja orientalis, and Eleutherococcus senticosus exhibited high inhibition against AChE activities at about 18-33% at 1 mg/mL. In addition, strong radical scavenging activities were also detected in those extracts which showed high AChE inhibition. Taken together, H. dulcis, T. orientalis, E. senticosus, and S. chinensis could be effective resources for enhancing cognitive function. Further, it was suggested that the AChE inhibitory activities of plant extracts might be related to antioxidative activity.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.183-187
• /
• 2009

Purpose: We describe a new and simple technique for arthroscopic fixation of tibial intercondylar eminence avulsion fracture using bioabsorbable pins in skeletally immature patients. Operative Technique: Diagnostic knee arthroscopy is performed using anterolateral and anteromedial portals. Fracture debris and blood clot are debrided to expose the injured site well. The fragment is reduced with the probe and fixed temporarily with a 1.1-mm diameter K-wire that is inserted percutaneously from the anterosuperior aspect of the knee joint. The drill guide is introduced into the joint and the fragment is secured by bioabsorbable, poly-p-dioxanone 1.3-mm pins inserted from different angles. The pins are 40 mm in length. The knee is placed in a long leg cast in extension for 4 weeks to assure that full extension is obtained. Conclusion: Arthroscopic fixation of an tibial intercondylar eminence avulsion fracture using bioabsorbable pins is not a technically demanding, suitable method that ensures fracture healing and restores the stability of the joint.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.715-721
• /
• 2011

This study was conducted to estimate aboveground biomass and nitrogen storage potential of tree species-eight clones of a poplar and hybrids, one clone of Salix alba L., dawn redwood (Metasequoia glyptostroboides Hu and W.C. Cheng), yellow poplar (Liriodendron tulipifera L.), Okamoto maple (Acer okamotoanum Nakai), and pin oak (Quercus palustris $M{\ddot{u}}nchh.$)- after treating with liquid pig manure. Stems showed the highest percentage of aboveground biomass, and followed by branches and leaves. Nitrogen content in aboveground biomass components was the highest in leaves, and followed by branches and stems. Average aboveground biomass production was higher in the clones and species treated with manure than those of not treated, 30 ton/ha and 16 ton/ha, respectively. In the manure-treated site, clone 'Dorskamp' of Populus deltoides${\times}$Populus nigra showed the highest aboveground biomass (48.3 ton/ha). Average nitrogen storage potential was superior in the clones and species treated with manure than those of not treated, 159 kg/ha and 90 kg/ha, respectively. Clone 'Dorskamp' also showed the greatest nitrogen storage potential (286.5 kg/ha) among tested tree species. Therefore, 'Dorskamp' is the most suitable clone for treating liquid pig manure, but additional studies are needed to determine any damages or tolerance from the treatment.