• 한국추진공학회지
• /
• 제17권2호
• /
• pp.31-38
• /
• 2013

본 연구에서는 열습환경에 노출된 탄소섬유/에폭시 복합재의 핀 체결부에 대해 핀 하중시험을 수행하고 수집된 음향방출신호를 분석하여 열습환경이 복합재 핀 체결부의 파괴거동에 미치는 영향을 조사하였다. 이때 시편은 환경조건에 노출되기 전의 시편(Base), 상온침수환경에 노출된 시편(RT), 고온침수 환경에 노출된 시편(HT)으로 구분하였다. 연구결과에 의하면 RT 시편과 HT 시편의 베어링 강도는 Base 시편에 비해 각각 2.2%와 13% 감소하였다. 음향방출신호의 경우 시편 종류에 따라 파손이 가속화되는 시점이 달라짐을 나타내었으며 RT 시편과 HT 시편은 Base 시편에 비해 모재균열에 의한 이벤트가 감소하는 경향이 나타났다. 이로 미루어 판단하면 열습환경은 복합재 핀 체결부의 음향방출신호뿐 아니라 계면특성의 저하도 초래함을 알 수 있었다.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.245-250
• /
• 2020

현재 국내에서 개발 중인 군용 무인 이동체들은 다양한 임무를 수행하기 위하여 탑재 장치들이 많아지고 있으며 이 탑재 장치 간 인터페이스 케이블도 증가되고 있다. 또한 협소한 무인 이동체 내부 공간 문제로 탑재 장치들은 소형화, 집적화가 요구되고 있다. 상기 두 가지 이유로 커넥터도 소형 커넥터를 선정해야 하며, 이는 핀 간 거리가 가까워져 이로 인해 노이즈에 취약하게 된다. 본 논문에서는 케이블 트위스트가 풀리는 커넥터 핀에서 노이즈 원 종류에 따라 생성되는 자기장이 주변 핀에 얼마만큼의 영향을 미치는지 분석하여 최적 핀 배치 설계의 가이드를 제시하였다. 첫째, 핀과 핀 사이에 누화 보다 자기장에 의한 영향이 크다. 둘째, +, - 노이즈원과 1칸 근접 시 +, - 사이 양옆의 자기장 분포가 강하다. 셋째, +,- 노이즈원과 2칸 근접 시 노이즈원과 원 신호 사이 핀을 공핀으로 놓은 경우보다 그라운드 핀으로 설정 시 자기장 분포가 개선된다. 넷째, 노이즈원이 Tx ±, Rx ± 와같이 차동모드 통신인 경우 Tx ±, Rx ± 배치에 따라 민감 신호 최적 배치 영역을 제시하였다.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.46-51
• /
• 2000

The contact stress characteristics of the domestic CPF pin when inserted into the rigid PTH was analyzed using the finite element method. The model geometry was based on the shape of the existing pin and the two different PTH diameters were used in the analysis. The stress distributions with respect to the friction coefficients were compared and the stress variations of the compliant part of the pin, which have an influence on the performance, were displayed with the time and the arc length on complete connection.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.9-14
• /
• 2002

Ferrule is widely used as fiber optic connecters. In fiber-optic communications, the shape accuracy such as coaxiality and cylindricity of ferrule affects insertion loss. When coaxial grinding of ferrule supported by two pin, pin alignment and chucking accuracy are very important. In this research, the kinematic behavior of the ferrule center is investigated in the case where cone-shaped center pins and round circle hales which make contact with each other near the edge of the holes, using homeogenous coordinate transformation and numerical analysis. The obtained results are as follows: The alignment errors between center pins alone do not affect the rotation accuracy of ferrule. The alignment errors between center holes cause a sinusoidal displacement of ferrule. And the maximum displacement of ferrule centers increase in proportion to the center pin angle in the case of a fixed alignment errors

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.247-250
• /
• 1998

The scattering of plane ultrasonic waves by the nuclear fuel pin of liquid metal reactor in sodium is studied. According to the internal composition in the cladding tube, the fuel pin has three cross sections, i.e. helium gas plenum, sodium-filled section, and fuel insertion section. The scattering spectra for each section of the fuel pin are different. The circumnavigating ultrasonic waves of each section are analyzed by the resonance scattering method. The whispering gallery wave modes are generated in the sodium-filled plenum section and the fuel rod insertion section with a sodium-gap. The circumferential wave modes are propagated in the cladding tube of the helium gas plenum section. The annular gap between the cladding tube and metal uranium pellet rod affects the scattering spectra. The different propagation characteristics can be utilized for the nondestructive method of detecting the unbonded area and measuring the level of the sodium-filled section of the fuel pin.

• Tribology and Lubricants
• /
• 제29권2호
• /
• pp.85-90
• /
• 2013

The effects of contact pressure on the sliding wear behavior of mild steel in a pin-on-disc type apparatus were investigated. Sliding wear tests were conducted with various combinations of the load and apparent area of contact. The wear behavior of mild steel as a function of sliding speed was independent of contact pressure. However, the wear rate at different sliding speeds was influenced by the load regardless of the apparent area of contact. This was attributed to the fact that there may be no difference in the real area of contact for any combination of the load and apparent area of contact.

• 산업기술연구
• /
• 제28권B호
• /
• pp.3-7
• /
• 2008

A cylindrical pin fin with variable fin base thickness is optimized based on fixed outer radius by using the one dimensional analytic method. Heat loss from the pin fin with fixed outer radius is presented as a function of the fin length. The ratio of in length for optimum heat loss to that for the maximum heat loss is listed. The maximum heat loss and effectiveness and the fin length for the optimum heat loss are presented as a function of fin base thickness and outer radius. One of the results presents the maximum effectiveness decreases rapidly first and then decreases slowly as the fin outer radius increases.

• 산업기술연구
• /
• 제24권A호
• /
• pp.9-15
• /
• 2004

The flexural strength from 3-point bend test and fatigue properties were measured to evaluate mechanical properties of metal/ceramic interface of the multilayer ceramic package produced through tape casting. From the results, the specimens with three electrode layers showed the highest strength. The temperature distribution with time during thermal cycle and thermal stresses with the change of electrode's shape have been estimated by mathematical modelling. Specimen affected by thermal shock, produced microcracks by the difference of thermal expansion coefficient. The results of tensile test and fatigue test showed the rupture at pin. The fact that the pin brazed specimens were always fractured at the pin proved the good bonding condition between pin and electrode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.987-991
• /
• 2003

Ferrule is widely used as fiber optic connecters. In fiber-optic communications, the shape accuracy such as coaxiality and cylindricity of ferrule affects insertion loss. When coaxial grinding of ferrule supported by two pin, pin alignment and chucking accuracy are very important. In this research, the kinematic behavior of the ferrule center is investigated in the case where cone-shaped center pins and round circle holes which make contact with each other near the edge of the holes, using homeogenous coordinate transformation and numerical analysis. The obtained results are as follows: The alignment errors between center holes cause a sinusoidal displacement of ferrule. And the maximum displacement of ferrule centers increase in proportion to the center pin angle. The relationship between center pins displacement in coaxial grinding and grinding accuracy was explained.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.74-78
• /
• 2003

Stress analysis was conducted with finite element method to study the stress distributions in both single-pin and multi-pin loaded composite laminates. The various parameters involved in the design of the joint method were considered. The stress distributions in the vicinity of the holes were predicted considering the effects of various parameters such as the lay-ups, number of pins, number of rows, row spacing, and hole patterns. The results show that the performance of joint is greatly affected by these parameters.