• 제목/요약/키워드: Pilot Ratio

검색결과 477건 처리시간 0.022초

파일럿규모의 다단계 막분리 공정을 통한 LNG 연소 배가스로부터 이산화탄소의 회수연구 ([ $CO_2$ ] Recovery from LNG-fired Flue Gas Using a Multi-staged Pilot-scale Membrane Plant)

  • 김정훈;최승학;김범식;이수복;이용택
    • 멤브레인
    • /
    • 제17권3호
    • /
    • pp.197-209
    • /
    • 2007
  • 본 연구는 LNG를 연료로 사용하는 화력발전소 보일러에서 배출되는 1,000 $Nm^3/day$의 연소 배가스에 포함된 $8{\sim}10%$$CO_2$를 대상으로 순도 99%, 회수율 90%로 회수할 수 있는 실증규모의 다단계 막분리 공정에 관한 운전 결과이다. 이를 위해 본 연구팀에서는 가소화 안정성이 우수한 폴리이서설폰 중공사막을 개발하고 $CO_2/N_2$의 분리특성을 연구한바 있으며[1], 소형 모듈을 이용하여 압력 및 $CO_2$의 조성 변화에 따른 투과 특성을 실험과 향류 방식의 전산 모사를 통하여 확인하여 막분리에 의한 $CO_2$의 회수 가능성을 확인한 바 있다[2-4]. 이러한 선행 연구결과를 바탕으로 pilot 규모의 다단계 막분리 plant를 설계하여 제작, 설치, 운전하였으며 그 운전 결과를 다단계 공정의 수치 모사 결과와 비교하였다. 전체 공정은 크게 배출되는 배가스 내의 수분을 전단에서 제거하기 위한 제습 공정과 후단에 재순환이 가능한 4단계 막분리 공정으로 구성되어 있다. 4단 분리막 공정에서 배출되는 최종 $CO_2$의 농도는 운전 조건에 따라 $95{\sim}99%$$CO_2$$0.15{\sim}0.2$ ton/day의 회수율 $70{\sim}95%$회수규모로 얻어졌다. 얻어진 실험 결과는 수치 모사 결과와 비교하였을 때 매우 잘 일치 하는 것을 알 수 있었으며 운전 중 전체 공정은 안정적으로 작동하는 것을 확인할 수 있었다. 본 연구를 통해 다단계 막분리 공정을 통한 배가스에서 $CO_2$를 성공적으로 분리할 수 있었다.

압력제어 방식 금속 벨트 CVT 변속특성 해석 (Analysis of Ratio Changing Characteristics of a Metal V-Belt CVT Adopting Primary Pressure Regulation)

  • 최득환;김현수
    • 한국자동차공학회논문집
    • /
    • 제9권5호
    • /
    • pp.179-187
    • /
    • 2001
  • In this paper, a primary pressure regulating type ratio control system is developed for a metal belt CVT, and the CVT ratio changing characteristics are investigated by simulation and experiment. The hydraulic part of the ratio control system has a simple structure with one 3-way spool valve as a main ratio control valve and one bleed type variable force solenoid as a pilot valve. The mathematical modelling of the CVT hydraulic system is derived by considering the CVT shift dynamics. Simulation results of CVT speed ratio and the primary pressure agree with the experimental results demonstrating the validity of the dynamic models. It is found from the simulation and experimental results that the response time of speed ratio and primary pressure can be shortened by increasing the ratio control valve port area, and the size of feedback orifice of ratio control valve gives a damping effect on the primary pressure oscillation.

  • PDF

Effect of spinning parameters of polyethersulfone based hollow fiber membranes on morphological and mechanical properties

  • Tewfik, Shadia R.;Sorour, Mohamed H.;Shaalan, Hayam F.;Hani, Heba A.
    • Membrane and Water Treatment
    • /
    • 제9권1호
    • /
    • pp.43-51
    • /
    • 2018
  • Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

PSAM방식에 적용할 수 있는 새로운 페이딩 추정방식 (A New Fading Estimation Method for PSAM in Digital Land Mobile Radio Channels)

  • 김영수;김창주;정구영;문재경;박한규;최상삼
    • 한국전자파학회논문지
    • /
    • 제8권2호
    • /
    • pp.126-136
    • /
    • 1997
  • 이동통신에서 주파수 이용효율이 높은 QAM 변조방식을 코히런트 방식으로 통신하는 경우에는 채널상태를 추정하여 채널에 의한 신호의 왜곡을 보상하는 기술이 필요하다. 본 논문에서는 싱크함수(sinc function)를 이 용하여 레일리 페이딩 채널환경하에서 PSAM (pilot symbol assisted modulation)방식에 적용할 수 있는 새로운 페이딩 추정방식을 제안하였다. 기존의 가우시안 내삽볍 방식은 파일롯 심볼(pilot symbol)삽입주기가 나이 키스트 샘플링율(Nyquist sampling rate)에 근접할수록 성능이 급격히 저하되는 단점이 있으며, 위너 필터(Wiener filter)를 이용한 방식은 나이키스트 샘플링율에 근접해도 성능의 저하가 없는 장점이었다. 그러나 위너 필터를 사용한 방식은 최적의 필터계수를 구하기 위해서 채널 이득의 자기상관함수, 도플러 주파수와 신호대 잡음비(SNR)를 알아야 하며 이는 위너 필터방식을 설환경에 적용하기 어렵게 만드는 단점이다. 본 논문에서 제안한 방식은 위너 필터방식과 거의 유사한 성능을 갖고 있으면서도 채널 이득의 자기상관함수, 도플러 주파수와 SNR을 알아야 할 필요가 없는 장점이 있기 때문에 실환경에 적용하기 적합한 방식이다.

  • PDF

Comb Type 파일럿을 갖는 SC-FDMA에서 주파수 옵셋과 위상 잡음에 의한 ICI와 보상 알고리즘 (ICI and Compensation Algorithm against Frequency Offset and Phase Noise in SC-FDMA System with Comb Type Pilot)

  • 유상범;유흥균
    • 한국전자파학회논문지
    • /
    • 제21권4호
    • /
    • pp.399-407
    • /
    • 2010
  • SC-FDMA(Single Carrier-Frequency Division Multiple Access)는 DFT(Discrete Fourier Transform)-spreading 방식을 사용하여 OFDM(Orthogonal Frequency Division Multiplexing) 신호의 PAPR(Peak to Average Power Ratio) 저감하여 전력효율을 향상시키는 방식이다. 그러나, PAPR을 저감하기 위하여 블록 type 파일럿을 사용하기 때문에 이동 환경에 따른 도플러 주파수와 송수신기 사이의 주파수 불일치로 인한 주파수 옵셋과 시간 도메인에서의 위상 잡음으로 주파수 도메인에서 ICI(Inter Channel Interference)가 발생하여 SC-FDMA 시스템의 성능은 저감된다. 그러므로 이동 환경 및 위상 잡음을 제거하기 위하여 comb type 파일럿을 고려하고, 이에 대한 PAPR을 감소시키기 위하여 SLM(Selective Mapping) 기법을 사용하며, 효과적인 채널 추정 및 ICI 제거를 위한 기법을 제안한다. 그러므로 기존 블록 type에 비해 comb type을 사용함으로써 이동 수신 성능이 향상될 수 있으며 효과적으로 주파수 옵셋 및 위상 잡음을 효과적으로 제거 가능함을 보인다.

전력증폭기 비선형 보상 기술을 고려한 PSA-QAM의 성능분석 (Performance Analysis of Pilot Symbol Assisted QAM (PSA-QAM) with Power Amplifiers Nonlinear Compensation Technique)

  • 이병로;임영회;임동민;이광석;김현덕
    • 한국정보통신학회논문지
    • /
    • 제2권2호
    • /
    • pp.249-258
    • /
    • 1998
  • 이동통신에서, 신호의 페이딩을 보상하기 위하여 pilot symbol assisted modulation (PSAM)에 대한 많은 연구가 진행 되어왔다. 본 논문에서는 최대비합성 다이버시티를 사용하는 PSA-QAM에서 전력증폭기 비선형성 의 효과를 분석하였다. 먼저, PSAM성능의 한계를 구하기 위하여, 페이딩에 대한 완벽한 정보가 주어진 상태에서 최대비합성 다이버시티를 갖는 QAM의 이론적 성능을 분석하였다. 실제 PSAM에서, 페이딩에 대한 정보는 파일럿 심볼의 보간에 의하여 얻어진다. 오차의 평균전력을 최소화하는 보간필터를 사용하여 필터의 탭수, 파일럿 심볼 프레임 주기, 도플러 주파수가 성능에 미치는 영향을 분석하였다. 비선형 전력증폭기 AB, B, C급 의 AM/AM, AM/PM 특성을 성능분석 에 고려하였다. 비선형 보상기술인 Cartesian Feedback Loop (CFB) 이용하여 AWGN 채널과 Rayleigh 페이딩 채널에서 비선형 전력증폭기 종류에 따른 성능변화를 나타내었다.

  • PDF

재생유리를 혼입한 모르터의 특성에 관한 실험적 연구 (En Experimental Study on t he Properties of Mortar Containing Recycled Glass)

  • 배수호;정영수;석윤호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
    • /
    • pp.36-41
    • /
    • 1998
  • Recently, it has been reported that recycling of wasted glasses should be a hot issue in related business field. Thus, the purpose of this experimental research is to recycle wasted glasses by substituting for the cement in mortar and concrete. As a pilot test, workability and the strength of mortar with recycled glass have been tested and analyzed according to replacement ratio of recycled glass with grain size of them. As a result, considering the workability and the strength of mortar containing recycled glass, the existence of the optimum replacement ratio and grain size of them have been obtained.

  • PDF

고효율 순산소 버너의 연소 특성에 관한 실험적 연구 (Experimental study on combustion characteristics of high efficiency oxy-fuel burner)

  • 김세원;안재현;김민수
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.57-64
    • /
    • 2002
  • This paper describes the results of a series of experiments executed by using two pilot-scale oxv-fuel burners are designed for maximum capacity of 50,000 kacl/hr, 300,000 kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, swirl vane angle and inlet oxygen temperature on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and inlet oxygen temperature. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, Optimum excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

  • PDF

비만하지 않은 다낭성난소증후군 환자에서 메트포민 효용성의 예비 연구 (The Effect of Metformin in Non-Obese Women with Polycystic Ovary Syndrome; Pilot Study)

  • 김형옥;김계현
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제35권3호
    • /
    • pp.223-229
    • /
    • 2008
  • 목 적: 본 예비 연구는 비만하지 않은 다낭성난소증후군 환자들에게서 인슐린 저항성, 혈중 호르몬 농도 및 혈중 지질 농도에 관한 metformin의 효과를 알아보기 위해 수행하였다. 연구방법: 본 연구는 2006년 6월부터 2007년 9월까지 본원에서 다낭성난소증후군으로 진단받은 16명의 비만하지 않은 환자를 대상으로 하였다. 혈액 검사는 metformin 치료 전과 치료 후 6개월이 경과한 후에 실시하였으며 공복 혈당과 공복 인슐린 치, 75 g의 액상 포도당 섭취 후 2시간째의 혈당과 혈중 인슐린 농도를 측정 하였다. 혈중 호르몬 및 혈중 지질 농도는 FSH, LH, estradiol, testosterone, free testosterone, serum lipid profile을 포함하였다. 인슐린 저항성을 평가하기 위해 공복 시 혈당/인슐린 비율 (fasting glucose/insulin ratio; FGIR)과 액상 포도당 섭취 후 2시간째의 혈당/인슐린 비율을 산출하여 추정하였다. 또한 HOMA beta cell function 및 HOMA IR을 산출함으로써 인슐린 저항성 및 췌장 베타세포 기능을 조사하였다. 결 과: Metformin으로 치료한 후, 75 g 경구 당 부하 후 2시간째 측정한 glucose/insulin 비율은 증가되었으며 (p=0.04), HOMA IR은 치료 후 유의하게 감소가 있었다 (p=0.000). 그러나 혈중 지질 농도는 의미 있는 변화를 보이지 않았다. 혈중 free testosterone 농도는 치료 후 감소하였고 (p=0.001), LH 농도 및 LH/FSH 비도 감소하였다 (p=0.000, p=0.034). 결 론: 본 예비 연구는 metformin이 비만하지 않은 다낭성난소증후군 환자들에게서 인슐린 감수성을 개선하고, 고안드로겐혈증을 완화시키는 효과가 있을 수 있다는 것을 보여준다. Metformin의 역할을 결정하기 위하여 향후 보다 다수의 환자 군을 대상으로 하여 장기적인 추적 관찰을 수반한 심도 있는 연구가 이루어져야 할 것이다.