• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.548-556
• /
• 2015

The highly maneuverable fighter aircraft such as F-22, F-16 and F-15have the high maneuverability to maximize the combat performance, whereas the high maneuver characteristics might degrade the pilot's mission efficiency due to fatigue's increase by exposing him to the high gravity and, in the worst case, the pilot could face GLOC (Gravity-induced Loss Of Consciousness). The advanced aerospace company has applied the various technologies to improve the pilot's tolerance to the gravity acceleration, in order to prevent the pilot from entering the situation of the loss of consciousness. Especially, the Anti-G Suit(AGS) equipment to protect the pilot against the high gravity in flight could improve the mission success rate by decreasing the pilot's fatigue in the combat maneuver as well as prevent the pilot from facing GLOC. In this paper, a control algorithm is developed and verified to provide an optimal air pressure to AGS according to the gravity increase during the high performance maneuver. This result is expected, as the key technology, to contribute to the KF-X(Korean Fighter eXperimental), project in the near future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.502-505
• /
• 2004

Now for the first time in Korea pilot project on application of base isolation system to the RC building is carrying out by collaboration with KNHC and DRB dongil. The hybrid-type base isolation system, which is composed of sliding bearings and laminated rubber bearings and can make the resonance period of base isolated buildings comparatively long up to 4 or 5 seconds, is applied to this building. In this paper the overview of this project, the dynamic characteristics of this particular building and the response reduction effect against earthquakes are presented.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.488-489
• /
• 2011

This technical reports describes KEPCO's PLC technology and PLC AMI projects. KEPCO has developed PLC and PLC convergence technology. KEPCO's BPL(Broadband over PLC) standard was selected as an IEC International Standard (IEC 12139-1) in 2009. KEPCO conducted a project installing 550,000 smart meters to residential customers finishing in 2010. KEPCO will carry out a PLC-AMI project around country until 2020, as well as many pilot projects to test its PLC convergence technology.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.78.2-78.2
• /
• 2011

To achieve the required higher efficiency and lower emission performance, Korea's 300 MW IGCC RDD&D (Research Development, Demonstration and Dissemination) project was launched in December 2006 under the leadership of the Korea Electric Power Corporation (KEPCO), with the support of the Korea Ministry of Knowledge Economy. Our research group, KEPCO Research Institute had set-up the a coal gasifier for the pilot test and conducted many experiments for parametric study in this project. Our group focused visualization of pulverized coal injection pattern in the gasifier. Through this study we found that two types of coal burners having different oxygen supply angles can be a source changing gasification condition like temperature.

• International Commerce and Information Review
• /
• v.9 no.1
• /
• pp.99-117
• /
• 2007

The purpose of this study is to explore the application sphere of BPM(Business Process Management) to e-trade process using BPM technology and its service architecture in order to expand the usage of e-trade platform which is developing. After close reviewing the current status of trade process, the possibility of BPM application by e-trade process will be analyzed. The result of analysis is that BPM application to local L/C and purchasing confirmation process could be implemented because those processes are very suitable to apply standardized process and can minimize the risk and confusion of users. BPM application to remaining trade process have to be considered by mid-term and long-term project with the reflection of pilot project performance. Also this study suggests a business management model of e-trade process based on BPM technology which is the new IT technology and integrated interface in view of trade community.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.298-299
• /
• 2018

The construction liability type CM has been introduced in the form of a pilot project through public institutions since 2017 since it was introduced in the term of construction responsibility type construction project management in the Basic Law of Construction Industry in 2011 with the aim of improving the constitution of the Korean construction industry and strengthening global competitiveness. Through the introduction of construction-responsible CM, the government intends to change the paradigm of the overall construction industry, including design and construction, construction costs, disputes between stakeholders, and transparency of business. In this regard, the study aims to compare and analyze the evaluation methods on the bidding guide that public institutions (LH) are currently using to select companies in order to lay the foundations for successful construction of construction-responsible CM ordering methods.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.491-493
• /
• 2003

전력계통의 유연하고 안정적인 운용을 위한 인버터형 FACTS 기기의 국내 적용에 대한 연구 결과를 토대로 국내 154kV 계통에 적용되는 80MVA급 UPFC pilot plant project가 수행되었다. Project의 결과물로써 80MVA급 UPFC가 강진-장흥 154kV 계통에 제작, 설치되었다. 강진 변전소 UPFC는 각종 성능 시험 및 시운전 절차를 성공적으로 완료하였으며 현재는 병렬 인버터에 의한 강진 모선의 전압 제어 및 직렬인버터에 의한 강진-장흥간의 조류 제어 기능을 수행하며 상용 운전되고 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2028-2034
• /
• 2011

Substation Automation System (SAS) based on IEC 61850 is becoming more and more reality in applying power systems. As well, the development of various engineering tools and the convergence with diagnostic systems are underway. To reflect recent advancements in SAS technology, the Korea Electric Power Corporation initiated a 154kV SAS pilot project and a smart power grid business in 2010. In this paper, the authors will summarize the overview and the lessons learned in applying the IEC 61850-based 154kV Main transformer bay IED solutions to these two project.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.990-995
• /
• 2010

We consider a problem of intelligent Integration Information system for research ship, and propose a design as one effective solution of the problem. The goals of the proposed design and system are as follows: management of engine, management of ship, researcher's work, education, training, manage schedule of the project, and thus to manage the whole life cycle of the research ship project. These goals are basically to facilitate and implement innovation- and enhancement-related activities which intelligent Integration Information system is fundamentally pursuing.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1081-1087
• /
• 2009

An automatic construction system in Korea is now at the stage of the full automation like in Japan, and an actual pilot project is going to be built in 2009. However, in developing a new construction system that has never been implemented before, there is a need to assess the performance and to consider the uncertainty of the system. The program evaluation and review technique (PERT) allows dealing with this uncertainty. Thus, this paper implements an analysis of the process of steel fabrication and makes suggestions for time-related problems arising from the analysis. The time required for steel erection by the automatic system was compared with that in the traditional method. In the result, finding out another construction process and improving robot performance were proposed to resolve the problems. The results will contribute to promoting the development of an efficient system for the new automatic construction system.