• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1383-1390
• /
• 2000

Pilot symbol-based coherent detection is used to increase the link capacity in CDMA systems. In order to detect data efficiently, data signals must be compensated with channel estimation values obtained by using pilot symbols. Many channel estimation schemes were published in previous literatures. However, most of these schemes have performance deterioration in fast fading because of using average vaules of several timeslots. In this paper, we propose an improved channel estimation scheme which is efficient in fast fading and also operates in slow fading satisfactorily. Through computer simulation we show that the proposed scheme has better performance than other schemes in terms of both MSE and BER in fast fading and show robustness for variation in Doppler frequencies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.419-425
• /
• 2001

In land mobile communications, multipath fading is one of the key factors which affect the system performance. Some extensive studies have been carried out to improve the degraded performance under this fading channels. The PSAM channel compensation method using channel fading estimation is widely used and TCM is a combined coding and modulation technique that has been shown to provide significant coding gain without increasing the transmission bandwidth. In this paper, we analyze the performance of PSA-TC-8PSK which combines PSAM and TCM over frequency nonselective fading channels. To estimate channel fading, Wiener filter which minimizes error variance is used as compensation method and we analyze the affects on the system performance of the number of filter taps, period of the pilot symbol frame, and the Doppler frequency. In addition, we consider the symbol timing recovery circuit which can be implemented in the full-digital method and analyze the effects of symbol timing error on the system performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.119-125
• /
• 2015

In this paper, we introduce a Hadamard matrix interstream transmission based blind channel estimation for multi-cells multiple-input and multiple-output (MIMO) networks. The proposed scheme is based on a network with mobile stations (MS) which are deployed with multi cells. We assume that the MS have the signals from both cells. The signal from near cell are considered as desired signal and the signals from the other cells are interference signal. Since the channel is blind, so that we transmit Hadamard matrix pattern pilot stream to estimate the channel; that gives easier and fast channel estimation for large scale MIMO channel. The computation of Hadamard based system takes only complex additions, and thus the complexity of which is much lower than the scheme with Fourier transform since complex multiplications are not needed. The numerical analysis will give perfection of proposed channel estimation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.399-407
• /
• 2010

SC-FDMA system uses DFT-spreading method for reducing the PAPR of OFDM signal, which improves the power efficiency. Block type pilot is used in SC-FDMA system. However, there are ICI due to the inevitable phase noise and frequency offset that can be generated from the Doppler frequency and inaccuracy between the transceiver oscillators. This ICI definitely degrades the BER performance. To overcome this problem and estimate the channel efficiently, we like to propose ICI compensation algorithm for the SC-FDMA system with comb type pilot. SLM method is additionally included for the PAPR reduction when pilot is assigned in comb type. Finally, it is confirmed that the ICI due to the phase noise and frequency offset is efficiently compensated by the suggested algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.53-61
• /
• 2007

This paper researches on the scheme superimposing the rotation phases over the pilot and data symbols in order to reduce the peak-to-average power ratio(PAPR) of the orthogonal frequency division multiplexing(OFDM) communication. The bandwidth and power efficiency are the main consideration. The phases of rotation vector are added to those of both pilot symbols and data symbols interlaying between any two pilot symbols in an OFDM block. Owing to this scheme the transmitter reduces the PAPR using the partial transmit sequences(PTS) and the receiver restores the data symbol utilizing the channel estimation of pilot symbols. Therefore, the bandwidth efficiency is accomplished by not using the further subcarriers for the reduction of PAPR and the enormous increase of bit error rate according to the receiving error of the side information, i.e. the phases of rotation vector, is prevented. In other words, both bandwidth-and power-efficiency and quality of communication performance can be improved.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.109-112
• /
• 2001

Recently, as demands for super-high speed broad band wireless multimedia service increase, variable researches to develop wireless LAN have been carried out. In this paper, we propose and analyze LS(Least Squares)-PSA(Pilot Symbol Assisted) equalizer which compensates for each subcarrier of different attenuations and phase response for OFDM(Orthogonal Frequency Division Multiplexing)-based indoor wireless LAN systems. The proposed equalizer enhances the $E_{b}$ $N_{o}$ performance of 3dB and 4dB at BER=10$^{-2}$ as compared with LS equalizer in AWGN channel and indoor wireless channel respectively..

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1265-1275
• /
• 1999

An adaptive MMSE detector can be used to cancel the MAI in CDMA system. But standard adaptive MMSE detector cannot be used in real mobile environment due to fast fading channel. Furthermore multipath reception make it more difficult to converge to optimum weight values. In this paper we discuss and model the multipath fading environment in Forward-link Synchronous CDMA channels and propose adaptive MMSE RAKE detector structure which can be applied in the mobile station. A proposed adaptive MMSE detector requires estimation of received signal delay and complex channel coefficients such as amplitude and phase variation. These burden can be solved by utilizing the common pilot channel. The pilot channel may have higher power than the traffic channel, which give more exact channel estimation. Moreover RAKE structure gives more accurate and stable result which can be used as reliable reference signal in multipath fading channel environment. With this structure, conventional adaptive algorithm such as LMS or NLMS can be applied in adaptive MMSE detector.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.879-891
• /
• 2019

This paper provides performance evaluations of various channel estimation schemes for Advanced Television Systems Committee (ATSC) 3.0 multiple-input multiple-output (MIMO) system under a fixed reception environment. ATSC 3.0 MIMO system can obtain high spectral efficiency and improved reception performance compared to conventional terrestrial broadcasting systems. The ATSC 3.0 MIMO defines Walsh-Hadamard and null pilot encoding algorithms and the amplitude and phase of MIMO pilots are different from those of single-input single-output pilots. At the receiver, linear and discrete Fourier transform (DFT)-based interpolations can be used for the channel estimation. This paper provides the various combinations of the interpolation schemes for channel estimation in time and frequency dimensions, and then analyzes the performance of the various combinations through the computer simulation. The results of computer simulation show that the combination of the linear interpolation in the time dimension and then DFT-based interpolation in the frequency dimension can obtain the best performance among the considered combinations.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.234-237
• /
• 2003

The accuracy of channel estimation significantly affects the performance of coherent OFDM receiver. It is desirable to employ a good channel estimator while requiring low implementation complexity. In this paper, we propose a channel estimator that employs a simple two-dimensional (2-D) moving average (MA) filter as the channel estimation filter. The optimum tap size of the 2-D MA FIR filter is analytically designed in the time and frequency domain in association with the channel condition and pilot signal to interference power ratio. The analytic results can be applied to the design of adaptive channel estimator. Finally, the performance of the proposed channel estimator is verified by computer simulation.