• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.510-517
• /
• 2012

This study evaluated the recycling potential of in-site waste soil as pile back filling material (PBFM). We performed experiments to check workability, segregation resistance, bond strength, direct shear stress test, and dynamic load test using in-site waste soil in coastal areas. We found that PBFM showed better performance than general cement paste in terms of workability, segregation resistance, and bond strength. On the other hand, the structural performance of PBFM was slightly lower than that of general cement paste due to the skin friction force of pile by Pile Driving Analyzer and direct shear stress. However, because this type of performance degradation in terms of structure can be improved through the use of piles with larger diameter or by changing the type of pile, considering the economics and environment, we considered that recycling of PBFM has sufficient value.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.615-626
• /
• 2019

In this study, the applicability of PHC pile jointing method using rectangular steel tubular was studied. PHC pile joints are welded and bolt assembly. The bolt assembly method is a method that improves the various problems of welded joints. Numerical analysis and tests were conducted to analyze the applicability of the PHC pile jointing method using a rectangular steel tubular. The tests were carried out to test the material properties of the rectangular steel tubular material and the bending test of the pile joints. The numerical analysis was interpreted in the same conditons as the tests conditions. As a result, the material strength of each rectangular steel tubular could be used as a joint material. In the bending test, it was evaluated as a sTable material above the allowable stress of piles. In the numerical analysis results under the same conditions as the tests, it was possible to apply the pile joint material without exceeding the allowable stress of the material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.63-66
• /
• 2011

The aim of this study is to estimate the field applicability of PBFM to replace in-site soil with pile backfill used to replace the existing cement paste. As results, the flowability, segregation and bleeding, and bond strength of PBFM was a good performance than that of the existing cement paste. But the skin friction of pile by Pile Driving Analyzer (PDA) and compressive strength was slightly decreased than that of the existing cement paste. However, as pile backfill materials, and in terms of economics and environment, the applicability of PBFM is considered very effective.

• 한국지반환경공학회 논문집
• /
• 제11권5호
• /
• pp.45-51
• /
• 2010

본 연구에서는 생석회 말뚝에 의한 연약지반 안정처리공법으로써의 현장 적용성을 평가하기 위하여 한국산 생석회에 대한 공학적 특성 규명은 물론 지중에서의 생석회에 의한 지반개량 원리 및 주변지반의 개량특성에 대한 이론적 고찰과 함께 실내모형시험을 수행하여 이를 바탕으로 실제 현장에서의 적용성과 활용성을 평가하고자 하였다. 실험결과 생석회 말뚝 공법은 생석회의 소화 흡수에 의한 탈수효과, 말뚝의 팽창에 의한 압밀효과 및 말뚝 자체의 강도에 의한 지지력 증가, 침하감소 효과 등의 개량효과를 얻을 수 있는 것으로 평가되었다. 생석회는 재료 특성이 매우 양호하여 그 자체로써 상당한 강도를 가지고 있으나 보다 큰 강도가 요구될 시에는 시멘트 등을 첨가하면 효과가 있을 것으로 판단된다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.35-41
• /
• 2011

Recently, as large structures, which should support large design loads have been constructed, the study on the large diameter composite pile becomes necessary. The large diameter composite pile has the diameter over 700mm and consists of two parts of the upper steel pipe pile and the lower PHC pile by a mechanical joint. In this research, to analyze the bearing capacity and the material strength of the composite pile, three dimensional numerical analyses were performed. First, the numerical modeling method was verified by comparing the calculated load-movement curves of the pile with those of the field pile load tests. Then, a total of twelve analyses were performed by varying pile diameter and loading direction for three pile types of PHC, steel pipe and composite piles. The results showed that the vertical and the horizontal load-movement curves of the composite pile were identical with those of the steel pipe pile and the horizontal material strength of the composite pile was 60-80% larger than that of the PHC pile.

• 대한토목학회논문집
• /
• 제31권6C호
• /
• pp.251-258
• /
• 2011

강관말뚝은 오랫동안 다양한 깊은 기초에 적용되어 왔으나 최근 강재가격의 상승으로 균질한 품질, 큰 강성, 용이한 시공 등의 장점에도 불구하고 기술자들이 자유롭게 적용 못하고 있다. 그러므로 강관말뚝으로 시공할 경우에는 초기 항타후 계획고 이상에서 절단된 강관을 재활용할 수 있다면 공사비를 절감하는데에 기여할 수 있다. 이러한 사유로 인하여 시공자들은 항타후 절단된 강관말뚝을 새롭게 시공할 말뚝과 함께 시공하고자 하나 명확한 정량적인 항타후 강관말뚝의 거동특성의 부재 및 재활용을 위한 적절한 대응방법과 기준의 부재로 인하여 말뚝의 건전도 문제, 문제 발생시의 대응방법 부재 등이 실제 현장에서 종종 발생하고 있다. 본 연구에서는 신규 강관말뚝과 사용자 하중 또는 극한 하중을 받은 강관말뚝에 대하여 현장에서 수행한 말뚝 동재하시험과 실내에서의 피로시험, 인장시험, 샤르피 충격시험을 실시하여 그 결과를 비교분석하였다. 시험결과로부터 허용응력 수준의 항타응력이 발생한 사용 하중조건에서는 항복강도의 변화가 2% 이하이며 최대 허용항타응력($0.9{\sigma}_y$)을 항타횟수가 3000회까지 받은 극한 하중조건에서는 항복강도의 변화가 5% 이하인 것을 확인할 수 있다. 또한 각 변수의 민감도를 확인하기 위하여 통계분석을 실시하였다. 모든 실험결과로부터 강관말뚝의 재활용 가능여부에 대한 판단 기준은 항복강도의 변화 보다는 오히려 샤르피충격에너지, 용접부에서의 강도변화 및 품질관리, 강관의 단면 변화, 항타후 강관의 국부좌굴에 기인하는 것을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.21-22
• /
• 2020

In this study, the pile filling materials of the pile in drilled piling was studied. cement milk is mostly used as the filling materials of bored pile. The use of filling material based on cement milk is inefficient at field construction because it needs a lot of the charging mass. thickening agent was added to the cement milk to perform settlement estimation experiment on a circular cylinder, and as a result of examining the compressive strength of the day, it was found that the settlement estimation was significantly reduced. However, the strength was relatively low, it was confirmed that there was no problem with the regulation because the main surface fixative required relatively low strength.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.13-20
• /
• 2017

본 연구에서는 순환 유동층 보일러의 고칼슘 연소재를 활용하여 개발한 새로운 매입말뚝의 주면고정액(ZA-Soil)에 대한 성능을 평가하기 위해 실내시험을 실시하였고, 보통 포틀랜드시멘트와의 비교평가를 실시하였다. 실내시험 결과, 매입말뚝의 고강도 주면고정액(ZA-Soil 1)과 저강도 주면고정액(ZA-Soil 2)의 압축강도는 보통 포틀랜드시멘트 대비 68.0%와 64.6%인 것으로 나타났고, 적절한 유동성과 환경적 안정성을 확보하고 있는 것으로 나타났다. 또한 매입말뚝의 고강도 주면고정액(ZA-Soil 1)을 흙 재료와 혼합한 경우 재령 28일에서의 압축강도가 보통 포틀랜드시멘트를 사용한 경우의 압축강도에 비해 1.10~1.23배 큰 것으로 나타나 강도증진효과가 우수한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1303-1311
• /
• 2006

Most of the piles are designed as group piles. In certain geotechnical environments, the installation of group piles causes heaving of the already installed piles. The unfavorable effects of pile heaving on pile bearing capacity have been well known to field engineers. However not many engineers pay enough attention to this subject. According to our recent researches, not only the bearing capacity but also the pile material could be seriously damaged due to the installation of nearby piles, especially with the cases of precast concrete piles. When the pull-out force due to installation of neighboring piles acting on the already installed precast concrete pile exceeds the shaft friction, pile heaving occurs. At the same time, if the pull-out force exceeds the allowable tensile strength of the precast concrete pile, tensile failure is inevitable, which is critical for the pile integrity. In other cases the pile material was not damaged but serious relaxation occurred as the results of pile heaving. In this paper, the pull-out mechanism due to the installation of group piles is explained.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.286-293
• /
• 2005

In soft ground the settlement criterion usually governs. Therefore, it is very important not only reasonable assessment of the allowable bearing capacity of the soil but also reasonable assessment of settlement. In the previous studies by many other researchers, load concentration ratio and settlement reduction factor are usually proposed for estimating the settlement of granular compaction piles. In the previous studies, the reinforced ground with granular compaction piles is simplified as composite ground and the analysis is performed with in the basis of this assumption. However, the lateral deformation of granular compaction pile could not be considered and only the relative vertical strength between pile and soils could be considered in the analysis. In this study, a method adapting the Tresca failure criterion is proposed for calculating settlement of granular compaction pile. Proposed method can be considered the strength of pile material, pile diameter, installing distance of pile and the deformation behavior of vertical and horizontal directions of pile. In the presented study, large-scale field load test is performed and the results are described. Also, predictions of settlements from the proposed method are compared with the results of the load test. In addition, a series of parametric study is performed and the design parameters are analyzed.