• 한국지반공학회논문집
• /
• 제26권12호
• /
• pp.31-40
• /
• 2010

본 연구에서는 수직 및 수평하중을 받는 말뚝기초의 두부구속조건(고정단, 힌지단)에 따른 3차원 수치해석을 수행하였다. 수평하중과 수직하중 작용 시 말뚝과 기초의 강결합(고정단)이 힌지결합에 비하여 말뚝두부에서 횡방향 강성 및 단면 발생모멘트(휨모멘트)가 크게 나타나고 전면기초(raft)에서 발생하는 전단력도 크게 나타남을 알 수 있었다. 따라서 말뚝의 두부구속조건이 말뚝기초 전체의 거동에 지대한 영향을 미치는 것을 알 수 있었으며, 힌지결합이 강결합과 비교하여 전면기초의 두께 및 말뚝의 철근 배근량을 감소시킬 수 있기 때문에 허용변위를 만족하는 선에서 경제적인 말뚝기초의 설계가 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.36-43
• /
• 2004

Most of pile foundations are fixed head condition, but lateral loading test for pile is performed under free head condition generally In this study, a lateral loading test for a large diameter drilled shaft was performed under the fixed pile head and the free pile head condition, where lateral displacement along the pile depth was measure. Test results and theoretical values were compared and analyzed.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.463-475
• /
• 2023

Tunnel construction activity, conducted mainly in mountains and within urban centres, causes soil settlement, thus requiring the relevant management of slopes and structures as well as evaluations of risk and stability. Accordingly, in this study we performed a three-dimensional finite element analysis to examine the behaviour of piles and pile cap stability when a tunnel passes near the bottom of the foundation of a pile group connected by a pile cap. We examined the results via numerical analysis considering different conditions for reinforcement of the ground between the tunnel and the pile foundation. The numerical analysis assessed the angular distortion of the pile cap, pile settlement, axial force, shear stress, relative displacement, and volume loss due to tunnel excavation, and pile cap stability was evaluated based on Son and Cording's evaluation criterion for damage to adjacent structures. The pile located closest to the tunnel under the condition of no ground reinforcement exhibited pile head settlement approximately 70% greater than that of the pile located farthest from the tunnel under the condition of greatest ground reinforcement. Additionally, pile head settlement was greatest when the largest volume loss occurred, being approximately 18% greater than pile head settlement under the condition having the smallest volume loss. This paper closely examines the main factors influencing the behaviour of a pile group connected by a pile cap for three ground reinforcement conditions and presents an evaluation of pile cap stability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.3-44
• /
• 1999

This paper discusses the lateral behavior of single and group piles in homogeneous and non-homogeneous(two layered) soil. In the single pile, the model tests were conducted to investigate the effects on ratio of lower layer height to embedded pile length, ratio of soil modules of upper layer to lower layer, boundary rendition of pile head and tip, embedded pile length, pile construction condition, ground condition with saturate and moisture state in Nak-Dong river sand. Also, in the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, boundary condition of pile head and tip, eccentric load and ground condition. The maximum bending moment and deflection induced in active piles were found to be highly dependent on the relative density, pile construction condition, boundary condition of pile head and tip. Based on the results obtained, it was found that the decrease of lateral bearing capacity in saturated sand was in the range of 31% - 53% as compared with the case of dry sand. Also, in the group pile, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8%, and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. In this study, the program is developed by using the modified Chang method which used p - y method and the exact solution of governing equation of pile and it can be used to calculate the deflection, bending moment and soil reaction with FDM in non-homogeneous soil. In comparing the modified Chang method with field test results, the predict results shows better agreement with measured results in field tests.

• 한국지반환경공학회 논문집
• /
• 제5권2호
• /
• pp.33-39
• /
• 2004

대부분의 말뚝기초는 두부 고정상태이지만, 수평재하시험은 일반적으로 두부 자유상태에서 시행되었다. 이번 논문은 두가지 경우(두부고정, 두부자유)에 대한 말뚝깊이별 수평변위와 이론 방정식과 현장수평재하시험을 비교해가며 대구경현장타설말뚝의 수평거동을 분석한 말뚝현장수평재하시험을 수행하였다.

• Geomechanics and Engineering
• /
• 제32권5호
• /
• pp.523-540
• /
• 2023

The failure of slope can cause remarkable damage to either human life or infrastructures. Stabilizing piles are widely utilized to reinforce slope as a slip-resistance structure. The workability of pile-stabilized slopes is affected by various parameters. In this study, the performance of earth slope reinforced with piles and the behavior of piles under static load, by shear reduction strength method using the finite difference software (FLAC^3D) has been investigated. Parametric studies were conducted to investigate the role of pile length (L), different pile distances from each other (S/D), pile head conditions (free and fixed head condition), the effect of sand density (loose, medium, and high-density soil) on the pile behavior, and the performance of pile-stabilized slopes. The performance of the stabilized slopes was analyzed by evaluating the factor of safety, lateral displacement and bending moment of piles, and critical slip mechanism. The results depict that as L increased and S/D reduced, the performance of slopes stabilized with pile gets better by raising the soil density. The greater the amount of bending moment at the shallow depths of the pile in the fixed pile head indicates the effect of the inertial force due to the structure on the pile performance.

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.21-30
• /
• 1987

말뚝머리에 수평력을 받는 단일주동말뚝의 극한수평저항력을 산정할 수 있는 몇몇 방법이 수평직 반반력, 말뚝길이 및 말뚝두부구속조건을 고려하여 확립제안된다. 말뚝의 이동에 의하여 주동말뚝 이 지반으로 부터 받게 되는 극한수평지반반력은 말뚝주변지반의 소성상태 및 말뚝형상을 고려하 는 것에 중점을 두어 유도한 산정이론식을 이용하여 산정될 수 있다. 말뚝은 짧은말뚝, 긴말뚝 등 으로 구분되며 이는 말뚝에 발생하는 최대횡모멘트와 항복모멘트의 비교에 의하여 구분된다. 말뚝 머리의 구속조건으로는 두부자유 및 두부요전구동의 두가지 경우가 취급된다. 실측치와의 비교에 의하면, 본이론에 의한 극한수평진항력은 Broms이론에 의한 이론치보다 더 잘 실측치에 접근하고 있음을 보여 준다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.343-358
• /
• 2008

Piles of a bridge pier are connected with a column through a pile cap(footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. This difference causes a change of the design method. Connection methods between pile heads and the pile cap are divided into two groups ; rigid connections and hinge connections. KHBDC(Korea Highway Bridge Design Code) has specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However some specifications prescribe that conservative results through investigations for both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which have very good quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) are unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the very large diameter drilled shaft and the pile cap for Incheon Bridge which will the longest bridge in Korea were investigated through the full modeling for rigid connection conditions.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.123-134
• /
• 2005

비선형 말뚝두부강성을 고려한 3차원 군말뚝기초 해석기법(YSGroup)을 개발하였으며 이를 기타 해석기법들(탄성 변위법, Croup 6.0, FBPier 3.0)과 비교${\cdot}$분석하였다. 본 해석기법은 말뚝캡을 평면쉘요소로, 교각은 3차원 보요소로, 그리고 개개 말뚝들은 보-기둥요소로 모델링 하였다. 교각 상단에 수평하중을 받는 $2\times2$배열 군말뚝기초에서 지반을 선형으로 가정한 경우를 대상으로 탄성변위법, Group 6.0, FBPier 3.0, 그리고 본 해석기법(YSGroup)을 이용하여 해석한 결과, 본 해석기법과 탄성변위법, Group 6.0은 서로 유사한 말뚝두부변위가 산정되었으나 FBPier 3.0는 다소 큰변위가 산정되었다. 지반의 비선형성이 고려된 상부구조물(교각)의 변위는 본 해석기법(YSGroup)과 FBPier 3.0을 통해 산정 가능하였는데, 이는 본 해석기법과 FBPier 3.0은 유한요소법을 이용하여 상부구조물을 직접 모델링하였기 때문이다. 말뚝두부조건이 힌지조건인 경우의 군말뚝은 말뚝캡의 과다한 회전이 발생할 가능성이 큼을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.253-259
• /
• 2000

This thesis investigated the behavior of super structure by varying the factors such as the change of pile rigidity, the characteristics of soil and the constraint condition of support. The results of this study are as follows; 1. The pile rigidity in the Fig 3.3 computed by the rotating deformed plane method becomes the elastic range at approximately about 5.1 m (D : 1.0 m) below the ground level. This result is consistent with the previous study that the pile deformation occurs approximately 3 to 6 times pile diameter from the pile head. 2. The values of forces and deformations for the structure-pile system in Y-direction appeared larger than that in X-direction, since the pile rigidity and constraint condition of support were changed as shown Fig.3.5 to 3.8. 3. The current practice for the analysis of structure-pile system has not considered the variation of pile rigidity and the constraint condition of support. So, the analysis of structure-pile system with large difference in super-structure rigidity must includes these factors in both X and Y directions.