• 제목/요약/키워드: Pigment influence

검색결과 81건 처리시간 0.022초

유기안료의 첨가가 도공층의 표면특성에 미치는 영향 (Influence of Orgnainc Pigment Addition on Surface Properties of Coating Layer)

  • 정경모;이용규
    • 펄프종이기술
    • /
    • 제36권2호
    • /
    • pp.47-53
    • /
    • 2004
  • In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

고밀도 폴리에틸렌의 전계 세기의 영향 (Pigment Influence of High Density Polyethylene Electrical Strength)

  • 최용성;위성동;황종선;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
    • /
    • pp.50-53
    • /
    • 2008
  • In this work, the $TiO_2$ pigment influence in HDPE dielectric strength was analyzed. Chemical and structural characterizations were made to identify changes during the processing and your influence in the electrical properties. Formulations containing 0, 0.5, 1, 2.5, 4 and 6 of titanium dioxide were processed by extrusion and injection molding with stabilization-antioxidants, ultraviolet stabilizers and plasticizers. The electrical strength tests were analyzed by the statistical distribution of Weibull, and the maximum likelihood method. The high concentrations present lower values to electrical strength. The $\beta$ parameter could be using to insulator particles dispersion. The $TiO_2$ concentration variation shows that these incorporations implicate strength values increase has a maximum (5,35MV/cm). High pigment concentration induces a little falls in property values. Observing the $\beta$ parameter, minimum experiment electric field (Ebmin) and electric strength value, found that the best electric perform formulation was the formulation with 2.5% $TiO_2$ weight.

  • PDF

안료 함량에 따른 잉크의 레올로지 성질의 변화 (Rheological Properties According to the Pigment Concentration of Ink)

  • 박정민;김성빈;조진우
    • 한국인쇄학회지
    • /
    • 제21권1호
    • /
    • pp.71-80
    • /
    • 2003
  • Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content or characteristic also affect to the fluidity property not less than the vehicle. In the study, with the same vehicle on each sample, by making the sample to increase pigment content gradually. It can be examined the influence of the pigment to the fluidity of ink. In result we found that the viscosity value of the low shear rate rang has relatively higher value with increasing the pigment content in the ink. According to higher pigment content, yield stress and thixotropy index increases gradually. Structure recovery of the ink is that, the higher pigment content's ink, the less changing shear rate, and it takes less time to recover.

  • PDF

고밀도 폴리에틸렌에 있어서 전계의 세기의 영향 (Pigment Influence in High Density Polyethylene Electrical Strength)

  • 윤주호;최용성;문종대;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.331-332
    • /
    • 2007
  • In this work, the TiO2 pigment influence in HDPE dielectric strength was analyzed. Chemical and structural characterizations were made to identify changes during the processing and your influence in the electrical properties, formulations containing 0, 0.5, 1, 2.5, 4 and 6 of titanium dioxide were processed by extrusion and injection molding with stabilization-antioxidants, ultraviolet stabilizers and plasticizers. The electrical strength tests were analyzed by the statistical distribution of Weibull, and the maximum likelihood method. The high concentrations present lower values to electrical strength. The parameter could be using to insulator panicles dispersion. The TiO2 concentration variation shows that these incorporations implicate strength values increase has a maximum (5,35MV/cm). High pigment concentration induces a little falls in property values. Observing the parameter, minimum experiment electric field (Ebmin) and electric strength value, found that the best electric perform formulation was the formulation with 2.5% TiO2 weight.

  • PDF

무기안료가 시멘트모르타르의 압축강도와 흡수율에 미치는 영향 (The Influence of Inorganic Pigments on the Compressive Strength and Absorption of Cement Mortars)

  • 송혁;이재용;고성석
    • 한국안전학회지
    • /
    • 제19권2호
    • /
    • pp.104-111
    • /
    • 2004
  • The aim of this study was to investigate the influence of inorganic pigments on the physical properties of cement mortar. For this purpose, the compressive strength and absorption test were carried out on cement mortar imxed with inorganic pigments by changing the proportion of cement mortar, water-cement ratio, and ratio of pigment. The result of this study can be summarized as follows: the compressive strength of colored mortar rapidely increased in red and yellow mortar, as the mix ratio of pigment increased. In case of green and black mortar, however, the compressive strength decresed as the mix ratio incresed. In case of red and yellow mortar, the absorption of colored mortar increased as the mixing ratio increased, if the mean particle diameter of the pigment is small. In case of green and black mortar, the absorption ratio decreased as the mix ratio increased. After investigating the overall physical properties of colored mortar, it was confirmed that the proper mix ratio of pigment securing the properties of colored mortar was below 6% of the weight of the cement to be used.

Monascus sp. 의 적색색소생성에 대한 용존산소량의 영향

  • 박노환;성문수;오영숙;정욱진
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 춘계학술발표대회
    • /
    • pp.267-270
    • /
    • 2000
  • 이차대사산물의 생산에 영향을 미치는 인자 중 통기성의 조절을 통한 Monascus 적색색소의 생산을 증가 시켰다. 높은 산소공급조절은 균체량을 증가 시켰으며, 낮은 산소공급조절은 고농도의 적색색소를 생산하였다. 따라서, 산소 공급량의 조절을 통하여 적색색소 생합성 과정을 활성화 시킬 수 있다.

  • PDF

유기안료 배합이 도공층의 표면 및 광학적 특성에 미치는 영향 (Influence of Organic Pigment Blending on Surface and Optical Properties of Coated Paper)

  • 정경모;원종명;이용규
    • 펄프종이기술
    • /
    • 제44권3호
    • /
    • pp.1-8
    • /
    • 2012
  • The effects of several factors including organic pigment blending and calending conditions on the surface and optical properties of coated paper were investigated. When clay and calcium carbonate are blended in the ratio of 7 to 3, highest smoothness and relative sediment volume were obtained. When organic pigments were added to the mixture of clay and calcium carbonate, the relative sediment volume did not changed significantly. However, when organic pigments were added to calcium carbonate, sheet gloss and smoothness were improved, and showed the better results than that obtained from the mixture of organic pigment and clay. When organic pigment is blended with clay, the particles of organic pigment are buried in the packing structure of coating layer. However, the particle shape of calcium carbonate is quite different from that of clay, and the aspect ratio of calcium carbonate is similar to that of organic pigment. Thus organic pigment particles are not buried and improved effectively the physical characteristics of coating layer. When the hollow sphere pigment was blended, opacity and sheet gloss were improved significantly. Even though the coating color applied was reduced, the similar level of opacity was maintained. Also, if particle size and void volume are increased, gloss is improved, because coating layer is easily transformed in calendering. Therefore, even though lower pressure was applied during calendering, the smoothness of surface of coating layer was improved, and the decrease of void volume in coating layer was reduced, and the quality of coated sheet can be improved.

시판 피그먼트 염색직물의 워싱가공에 관한 연구 (Washing of Pigment Dyed Fabrics)

  • 이혜자;유혜자
    • 한국의류학회지
    • /
    • 제30권8호
    • /
    • pp.1169-1177
    • /
    • 2006
  • The aim of this study was to investigate the change of the weight loss, tensile strength, flex stiffness, and color-values of the pigment-dyed cotton, polyester/cotton, polyester and nylon fabrics after washing process. Pigment-dyed cotton and polyester/cotton fabrics were treated with the cellulase, of which concentrations were 0, 1, 3 and 5g/l. The time of washing process ranges from 30 to 120 minutes. Pigment-dyed polyester and nylon fabrics were treated without enzyme, of which the washing temperature were 13, 30, $55^{\circ}C$ and the washing time ranges from 30 to 120 minutes. Also, they were tested in terms of the influences of agitation speed(rpm) and additives such as softeners, enzymes, detergents. The weight loss and tensile strength of the pigment-dyed cotton and polyester/cotton fabrics were positively correlated with the concentration of cellulase and washing time. Neither polyester nor nylon fabrics exhibited any change of the weight. All fabrics showed the decline of flex stiffness and decoloration after washing process. Decoloration of cotton and polyester/cotton fabrics was due to both the influence of cellulase and the mechanical rubbing. On the other hand, that of polyester and nylon fabrics was caused by the mechanical rubbing only.

釉上彩色料에 關한 硏究 (Studies on Overglaze Stain)

  • 이종근;박용완
    • 대한화학회지
    • /
    • 제4권1호
    • /
    • pp.27-37
    • /
    • 1957
  • High-fire stain is influenced by the conditions of glaze, firing atmosphere, etc. On the contrary, low fire stain is not influenced by those conditions but obtainable in arbitrary colors and it is indispensable for pottery decoration. It is difficult for us to study into the color in the sphere of result publication method and expression of color. Looking over the literature on this subject, I have been confronted with much difficulties, accordingly, I made a basic and systematic experiment as to six low-firing stains (blue, green, blue-green, brown black and yellow) and made it proper to be applied in these studies. On pigment, I confirmed the influence of the assistant coloring matter by mixing up the coloring matter and the assistant coloring matter in various proportions. On flux, I measured the melting point by making PbO-$SiO_2$ system and PbO-$B_2O_3-SiO_2$ system and decided the range of usage. Also I checked the coloring by making the pigment on laze with pigment and flux manufactured, and concluded the pigment and flux adaptation to it.

  • PDF

The Influence of Environmental Conditions on the Production of Pigment by Serratia marcescens

  • Hardjito, Linawati;Huq, Anwar;Colwell, Rita R.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권2호
    • /
    • pp.100-104
    • /
    • 2002
  • Serratia marcescens biovar A2/A6, isolated from an Indonesian freshwater source, was identified based on extensive morphological, biochemical and genetic characterization. Formation of pigment was found to be strongly influenced by environmental conditions. Placket-Burman design was used to analyze the effect of carbon and nitrogen sources. Based on results of physiological and biochemical studies, the optimum conditions for growth and pigment formation were incubation 30$^{\circ}C$ in a neutral to slightly alkaline medium containing lactic acid and beef extract.