• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.918-921
• /
• 2005

According to the mechanical-electrical coupling characteristics and the electrical Impedance property of resistor-inductor-capacitor(RLC) series resonant circuit, the mechanical impedance analysis of a bimorph piezoceramic patch shunted with a series RLC resonant circuit is conducted. The displacement transfer function of a cantilever beam bonded with a piezoelectric shunt damping module is deduced in the case of single mode vibration of the beam. By the use of vibration damping theory of tuned mass damper system, the parameter optimization of piezoelectric shunt damping system is performed. The optimal resonant state of the shunting circuit can be obtained when the resister and conductor are optimally adjusted. Test results show that the vibration control effect as well improved with optimized piezoelectric shunt system.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.54-64
• /
• 2006

To augment weakly damped lag mode stability of a hingeless helicopter rotor blade in hover, piezoelectric shunt with a resistor and an inductor circuits for passive damping has been studied. A shunted piezoceramics bonded to a flexure of rotor blade converts mechanical strain energy to electrical charge energy which is dissipated through the resistor in the R-L series shunt circuit. Because the fundamental lag mode frequency of a soft-in-plane hingeless helicopter rotor blade is generally about 0.7/rev, the design frequency of the blade system with flexure sets to be so. Experimentally, the measured lag mode frequency is 0.7227/rev under the short circuit condition. Therefore the suppression mode of this passive damping vibration absorber is adjusted to 0.7227/rev. As a result of damping enhancement using passive control, the passive damper which consists of a piezoelectric material and shunt circuits has a stabilizing effect on inherently weakly damped lag mode of the rotor blades, at the optimum tuning and resistor condition.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.49-56
• /
• 2001

저주파공진에서의 소음저감을 위한 압전단일패널에 대한 실험적 연구를 수행하였다. 압전단일패널은 압전재료를 평판 구조물에 부착하고, 션트회로를 압전재료에 연결한 구조물이다. 구조물의 저주파공진에서의 전달 소음저감을 위하여 압전감쇠를 이용하였다. 압전감쇠의 파라메터 튜닝은 제안한 새로운 방법을 적용하였다. 이 방법은 전기적 임피던스모델을 기초로 하여 공진회로에서 에너지 소산이 최대가 되도록 하는 방법으로 구조물에 부착된 압전재료에서 전기적 임피던스를 측정하여 시스템의 공진주파수 근처에서 등가 전기 회로를 구성하였다. 압전감쇠를 위한 공진션트 회로는 직렬로 연결된 저항과 인덕터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계 하였다. 압전단일패널의 전달 소음저감성능은 음향터널을 이용하여 실험을 수행하였다. 음향터널은 사각단면이며 소음 원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널은 터널의 중앙에 설치하여 투과 음압을 측정하였다. 압전감쇠를 통하여, 공진주파수에서의 좋은 소음 저감을 얻었다. 압전감쇠를 이용한 압전단일패널은 간단하고 경계적인 측면에서 소음 저감을 위한 유망한 기술이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.541-544
• /
• 2005

In this paper, admittance is introduced to represent electro-mechanical characteristics of piezoelectric structures and to predict the performance of piezoelectric shunt system. Finite element method is used to obtain numerical admittance. In order to illuminate the effect of noise reduction in the shunt system, two experimental setups were constructed. One is for matching the resonant shunt damping. The other is a standard test setup according to SAE J1400 used to measure the transmission loss for the smart panel with shunt circuit. Shunt performance and noise reduction of smart panel are realized by these two experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1089-1094
• /
• 2003

A main vibration source in HDD is arisen from high rotating disk/spindle, and vibration suppression of the disk-spindle system becomes a critical issue and a major concern for high performance of the drive. In this paper, we study the feasibility of suppressing unwanted vibration of disk-spindle system of the HDD by external shock and excitation utilizing piezoelectric shunt damping methodology. By considering dynamic characteristics of the disk-spindle system through modal analysis, a target vibration mode is determined and then the piezoelectric material is carefully integrated to the modified drive. In order to maximize improvement of vibration characteristics of the proposed system, shunt circuit is optimally designed via tuning processes. Finally, the vibration characteristics of the high rotating disk-spindle system of the proposed drive is experimentally evaluated in frequency domain.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.150-159
• /
• 2002

광대역 소음저감을 위한 압전지능패널에 대한 실험적 연구를 수행하였다. 압전지능패널은 기본적으로 압전재료를 부착한 평판구조물에 션트회로를 연결하고 흡음재들을 부가한 구조물이다. 압전감쇠와 수동적 특성을 혼용하여 중 주파수영역에서 흡음재의 수동적 특성을 이용하고 저주파수 영역의 공진주파수에서는 압전감쇠를 적용하여 소음저감시키는 개념이다. 저주파수 공진에서의 소음저감을 위하여 측정한 전기적 임피던스 모델을 이용하는 압전감쇠를 적용하였다. 압전감쇠를 위한 공진 션트회로는 직렬로 연결된 저항과 인덕터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계하였다. 압전지능패널의 전달소음저감 성능은 음향터널을 사용하여 실험을 수행하였다. 음향터널은 사각단면 형태이며 소음원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널들을 터널의 중앙에 설치하여 투과 음압을 측정하였다. 흡음재와 공기층을 갖는 압전이중지능패널은 수동적 특성에 의해 저주파수 영역의 공진주파수를 제외한 중주파수 영역에서 뚜렷한 소음저감 효과를 나타내었다. 압전감쇠를 통하여, 공진주파수에서의 좋은 소음저감을 얻었다. 압전감쇠와 수동적 방법을 혼용하는 압전지능 패널은 넓은 주파수 영역에서의 소음저감을 위한 유망한 기술이다.

• Smart Structures and Systems
• /
• 제12권5호
• /
• pp.547-577
• /
• 2013

To suppress vibration and noise of mechanical structures piezoelectric ceramics play an increasing role as effective, simple and light-weighted damping devices as they are suitable for sensing and actuating. Out of the various piezoelectric damping methods this paper compares mode based active control strategies to passive shunt damping for thin plates. Therefore, a new approach for the optimal placement of the piezoelectric sensors/actuators, or more general transducers, is proposed after intense theoretical investigations based on the Kirchhoff kinematical hypotheses of plates; in particular, modal and nilpotent transducers are discussed in detail. Based on the proposed distribution a discrete design for modal transducers is implemented, tested and verified on an experimental setup. For active control the modal sensors clearly identify the eigenmodes, whereas the modal actuators impose distributed eigenstrains in order to reduce the transverse plate vibrations. In contrast to the modal control, passive shunt damping works without requiring additional actuators or auxiliary power and can therefore act as an autonomous system, but it is less effective compensating the flexible vibrations. Exemplarily, an acryl glass plate disturbed by an arbitrary force initialized by a loudspeaker is investigated. Comparing the different methods their specific advantages are highlighted and a significant broadband reduction of the vibrations of up to -20dB is obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1120-1125
• /
• 2001

A new concept of piezoelectric smart panels for noise reduction in wide band frequencies is proposed and their possibility is experimentally investigated. Multi-mode damping is studied by using a newly proposed tuning method. The proposed panels are based on passive shunt damping methods. This method is based on electrical impedance model and maximizing the dissipated energy at the shunt circuit. four PZT are attached on smart panel for improving performance of transmission noise reduction. 0 prove the concept of piezoelectric smart panels, an acoustic measurement experiment was performed. The smart panels exhibit a good noise reduction in middle and high frequency ranges due to the mass effects of absorbing materials or/and the air gap. The use of piezoelectric smart panel renders noise reduction at resonance frequency. Noise reduction at multiple resonance frequencies is experimentally investigaed.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권4호
• /
• pp.396-411
• /
• 2014

Synchronized switch damping (SSD) techniques have recently been developed for structural vibration control using piezoelectric materials. In these techniques, piezoelectric materials are bonded on the vibrating structure and shunted by a network of electrical elements. These piezoelectric materials are switched according to the amplitude of the excitation force to damp vibration. This paper presents a new SSD technique called 'synchronized switch damping on negative capacitance and adaptive voltage sources' (SSDNCAV). The technique combines the phenomenon of capacitance transient charging and electrical resonance to effectively dampen the structural vibration. Also, the problem of stability observed in the previous SSD techniques is effectively addressed by adapting the voltage on the piezoelectric patch according to the vibration amplitude of the structure. Analytical expressions of vibration attenuation at the resonance frequency are derived, and the effectiveness of this new technique is demonstrated, for the control of a resonant cantilever beam with bonded piezoelectric patches, by comparing with SSDI, SSDVenh, and SSDNC techniques. Theoretical predictions and experimental results show the remarkable vibration damping capability of SSDNCAV technique, which was better than the previous SSD techniques. The broadband vibration control capabilities of SSDNCAV technique are also demonstrated, which exceed those of previous SSD techniques.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1140-1148
• /
• 2006

이 논문에서는 압전션트를 이용한 지능패널의 투과 손실에 대해 연구하였다. 지능패널의 전기-기계 연성계수인 어드미턴스를 도입하여 션트 댐핑의 성능을 예측하였다. 유한요소를 사용하여 수치적인 어드미턴스를 계산하였고 실험결과와 비교하였다. 압전션트 시스템에서 소음 저감의 효과를 보여주기 위해 지능패널의 투과 손실을 연구하였다. 두 개의 모델을 사용하여 어드미턴스와 투과 손실과의 관계를 규명하였고 이 관계에서 어드미턴스를 지능패널의 설계 지수로 사용가능함을 발견하였다.