• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.313-320
• /
• 2007

Recently, a new class of single-crystal piezoelectric materials such as lead metanibobate doped with lead titanate (PMN-PT) has been synthesized and were found to further enhance the electro-mechanical coupling factor compared to piezo-ceramic materials. This paper describes fabrication and evaluation of PMN-PT single crystal ultrasonic transducers for contact measurement of stainless steel that is one of the highly attenuative materials. The design conditions for ultrasonic transducer such as front matching layer between test materials and piezo-material and backing materials were investigated based on the simulation results by KLM model. The PMN-PT single crystal ultrasonic transducers with centre frequencies at 1 and 2.25 MHz were fabricated and their performances were evaluated.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.343-349
• /
• 2020

NKN [(Na,K)NbO₃] is a candidate lead-free piezoelectric material to replace PZT [Pb(Zr,Ti)O₃]. A single crystal has excellent piezoelectric-properties and its properties are dependent of the crystal orientation direction. However, it is hard to fabricate a single crystal with stoichiometrically stable composition due to volatilization of sodium during the growth process. To solve this problem, a solid solution composition is designed (Na,K)NbO₃-Ba(Cu,Nb)O₃ and solid state grain growth is studied for a sizable single crystal. Ceramic powders of (Na,K)NbO₃-M(Cu,Nb)O₃ (M = Ca, Sr, Ba) are synthesized and grain growth behavior is investigated for different temperatures and times. Average normal grain sizes of individual specimens, which are heat-treated at 1,125 ℃ for 10 h, are 6.9, 2.8, and 1.6 ㎛ for M = Ca, Sr, and Ba, respectively. Depending on M, the distortion of NKN structure can be altered. XRD results show that (NKN-CaCuN: shrunken orthorhombic; NKN-SrCuN: orthorhombic; NKN-BaCuN: cubic). For the sample heat-treated at 1,125 ℃ for 10 h, the maximum grain sizes of individual specimens are measured as 40, 5, and 4,000 ㎛ for M = Ca, Sr, and Ba, respectively. This abnormal grain size is related to the partial melting temperature (NKN-CaCuN: 960 ℃; NKN-SrCuN: 971 ℃; NKN-BaCuN: 945 ℃).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1039-1044
• /
• 2002

Film Bulk Acoustic Resonator (FBAR) using thin piezoelectric films can be made as monolithic integrated devices with compatibility to semiconductor process, leading to small size, low cost and high Q RF circuit elements with wide applications in communications area. This paper presents an MMIC compatible suspended FBAR using SOI micromachining. It is possible to make a single crystal silicon membrane using a SOI wafer In fabricating active devices, SOI wafer offers advantage which removes the substrate loss. FBAR was made on the 12㎛ silicon membrane. Electrode and Piezoelectric materials were deposited by RF magnetron sputter. The maximum resonance frequency of FBAR was shown at 2.5GHz range. The reflection loss, K$^2$$\_$eff/, Q$\_$serise/ and Q$\_$parallel/ in that frequency were 1.5dB, 2.29%, 220 and 160, respectively.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.1055-1065
• /
• 2016

An anisotropic ultrasonic transducer is proposed for Lamb wave applications, such as passive damage or impact localization based on ultrasonic guided wave theory. This transducer is made from a PMNPT single crystal, and has different piezoelectric coefficients $d_{31}$ and $d_{32}$, which are the same for the conventional piezoelectric materials, such as Lead zirconate titanate (PZT). Different piezoelectric coefficients result in directionality of guided wave generated by this transducer, in other words, it is an anisotropic ultrasonic transducer. And thus, it has different sensitivity in comparison with conventional ultrasonic transducer. The anisotropic one can provide more information related to the direction when it is used as sensors. This paper first shows its detailed properties, including analytical formulae and finite elements simulations. Then, its application is described.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.1
• /
• pp.29-32
• /
• 2016

Using the various exchange-correlation functionals, such as LDA, GGA-PBE, GGA-PBEsol and GGA-AM05 functionals, first principle studies were conducted to determine the structures of paraelectric and ferroelectric PbTiO₃. Based on the structures determined by the various functionals, the piezoelectric properties of PbTiO₃ are predicted under the density-functional perturbation theory (DFPT). The present prediction with the various GGA functionals are closer to the experimental findings compared to the LDA values. The present DFT calculations using the GGA-PBEsol functional estimate the experimental data more reasonably than the conventional LDA and GGA fucntionals. The GGA-AM05 functional also predicts the experimental data as well as the GGA-PBEsol. The piezoelectric tensor calculated with PBEsol is relatively insensitive to pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.40-43
• /
• 1996

Substrates of SAW filter are mainly single crystal such as LiNbO$_3$, LiTaO$_3$. However, fabrication of crystal is difficult and cost is very high. In this study, crystal was substituted for piezoelectric ceramics which has simple fabrication process. The same SAW filter mask was photolithographed on crystal(LiNbO$_3$) substrate and ceramic(PZT4, PZT5A and PZT8) substrate in order to compare experimental value with theoretical value. The difference of center frequency was only 3.7%. PZT8 showed good bandwidth properties. It is considered that PZT8 has higher mechanical quality factor and propagation velocity than PZT4, PTT5A.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.394-399
• /
• 2000

Langasite (LGS) is a material hoped to meet needs required of new base materials for future communication devices (e.g.SAW filters). In this study, synthesis of new materials was pursued by developing new compounds with the host structure of Langasite in hopes to obtain materials with improved characteristics; compounds including $La_3$$Ta_{0.5}$$Ga_{5.5}$$O_{14}$(LTG)and $La_3$$Nb_{0.25}$$Ta_{0.25}$$Ga_{5.5}$$O_{14}$(LNTG) were synthesized by solid state reactions. Characteristics of the compound synthesized in question were determined. The single crystals of Langasite-type were grown using the Czochralski method. The growth conditions for LTG and LNTG were studied and were found to be similar to those of LGS. The growth characteristics of LNTG were observed by studying etch pit formation density along the crystal length.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.91-96
• /
• 2020

The 33-mode dielectric and piezoelectric properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric single crystals were measured under large electric field and compressive stress. The phase transition from the low temperature rhombohedral to the high temperature tetragonal structure was observed in the range of 110~140℃, and the Curie temperature changing to the cubic structure was about 165℃. The polarization change according to the compressive stress and electric field was measured. Relative dielectric constant was calculated from the slope of the polarization curve applied to the electric field, and the calculated relative dielectric constant increased as the applied stress increased, and the relative dielectric constant decreased as the applied electric field increased. The strain according to the compressive stress and electric field change was measured, the piezoelectric constant was calculated from the slope of the curve, and the phase transition according to the application of pressure was confirmed. In the case of practical application as an underwater or medical ultrasonic actuator, it is necessary to properly design the magnitude of the compressive stress applied to the device and the DC bias in order to maintain linear driving.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.121-124
• /
• 1997

Emergence of advanced materials has been realized by the great demands for sophisticated state devices in high technology industry. It is the ear of speedy evolution of science and technology, in particular, materials processing technology, which enables us to synthesize any materials with respect to its purity and its perfection of crystal structure and shape (form) that have, heretofore not been available. The availability of ultra pure, fine raw materials, single crystals and thick/thin film materials has been largely responsible for such startling progresses that have been made in the realization of unforeseen, functional devices for high technology industry. Of the functional devices such as passive as active devices, non-silicon devices are mostly passive. Piezoelectric, electro-optic, magneto-optic devices, etc. are some of the examples. In this paper, magneto-optic materials for Faraday device, which is little known, are reviewed including its processing toward practical applications.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.393-401
• /
• 2013

In this paper, a $48{\times}64$ channel 2D array ultrasonic transducer with piezoelectric single crystals was designed, fabricated, and evaluated. Structure of the transducer was chosen to facilitate the electric connection on the planar array, and then components were fabricated in accordance with the structure. Detailed structure of the transducer was designed through finite element analyses. In order to improve the performance of the transducer, the crosstalk between adjacent elements was reduced through the control of kerf width and material, and the target frequency bandwidth was achieved through optimal design of the thickness of the single crystal and matching layers. After fabricating a prototype of the transducer according to the design and measuring its characteristics, the results were compared with those of finite element analyses to evaluate the performance of the developed transducer.