• 한국음향학회지
• /
• 제16권6호
• /
• pp.61-67
• /
• 1997

압전 회전센서(Piezoelectric Gyroscope)는 물체의 회전속도를 감지하기 위한 센서로서 압전효과를 이용해 코리올리스힘(Coriolis Force)을 측정하는 센서이다. 기존에 사용되고 있는 압전 회전센서는 1축형이 주종을 이루고 있는데 비하여 본 연구에서는 한 차원 발전된 2축형의 회전센서를 고안, 제작하였다. 이러한 새로운 구조에 대한 검토 및 고찰을 위해 유한요소법 (Finite Element Method) 을 통한 동적 해석을 실시하여 구조의 타당성을 검증하고 각 설계인자 변화에 따른 센서의 특성변화를 조사하였다. 또한 그 결과를 토대로 직접 회전센서를 제작하여 그 성능을 평가, 비교하였다. 나아가 센서의 특성평가를 위한 회전 시뮬레이터를 구성한 후 정량적인 실험을 통해 제작된 센서의 반응을 조사하였으며, 그 결과 본 논문에서 개발된 2축형 센서는 두 방향의 회전력에 대한 우수한변별도 및 감도를 나타내어 새로운 형태의 회전 센서로서의 사용가능성을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.635-639
• /
• 2013

Generating output characteristics of a EYE-type piezoelectric generator depending on ceramic size and materials of the elastic body were studied. EYE-type piezoelectric-generating device consist of the ceramic was attached between the both elastic body. piezoelectric-generating is that if the tension occurred at both ends of an elastic body, the piezoelectric effect occurs at ceramics through the form change of the elastic body. The structure of this EYE-type generator use various area. than a existing type generator, because the ceramic position of the directly force at does not apply. Resonance and output characteristics of the generator were analyzed by using FEM program. Generators were fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure output characteristics. Also, the experimental results were compared with the simulated results. As a result, output characteristics of the generator increased depending on the increase in ceramic thickness. In case of increase in ceramic width, resonance frequency of the generator also decreased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1809-1811
• /
• 2000

High power piezoelectric materials are presently being extensively developed for applications such as ultrasonic motors and piezoelectric transformer In this study, the piezoelectric and dielectric properties of $MnO_2$ doped $0.36Pb(Sc_{1/2}Nb_{1/2})O_{3}-0.25Pb(Ni_{1/3}Nb_{2/3})O_{3}-0.39PbTiO_3$ (hereafter PSNNT), which is the morphotropic phase boundary composition of the PSN-PNN-PT system were investigated. $MnO_2$-addition into the $0.36Pb(Sc_{1/2}Nb_{1/2})O_{3}-0.25Pb(Ni_{1/3}Nb_{2/3})O_{3}-0.39PbTiO_3$ composition increases the piezoelectric coefficient up to $k_{p}{\fallingdotseq}$55.6[%] and $Q_{m}{\fallingdotseq}$252. Moreover, $MnO_2$ addition makes tetragonal phase more stable with respect to rhombohedral phase.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.214-219
• /
• 2000

In this paper the structural dielectric and piezoelectric properties of Pb［(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$］ $O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.261-265
• /
• 2005

In order to fabricate complex-shaped polycrystalline ceramics by sintering, organic binders are usually pre-mixed with ceramic powders to enhance the formability during the shape forming process. These organic binders, however, must be eliminated before sintering so as to eliminate the possibilities of poor densification and unusual grain growth during sintering. The present work studies the effect of binder addition on grain growth behavior during sintering of $92(70Pb(Mg_{1/3}Nb_{2/3})O_3-30PbTiO_3))$-8PbO(mol%) piezoelectric ceramics. The microstructures of the sintered samples were examined for various heating profiles and debinding schedules of the binder removal process. Addition of Polyvinyl butyral(PVB) binder promoted abnormal grain growth especially in incompletely debinded regions. Residual carbon appears to change the grain shape from comer-rounded to faceted and enhance abnormal grain growth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.650-652
• /
• 2002

In this paper, specimens was manufactured in general method annexing PAN-PZT+0.8wt%Mn+1wt% Nb ceramics doped by Sr(0.0 ~ 1.2 wt%). and the following conclusion has been deduced. In XRD, the crystal structure of ceramic has the rombohedral structure and consequently the specimen characterized by MPB was manufactured. According to dopping with Sr, electromechanical factor(kp) little is changed. kp was maximum value 31.31[%] at Sr 1.2[wt%]. mechanical quality factor(Qm) was maximum value 371.879 at Sr 0.6[wt%].

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.61-64
• /
• 1998

PZT ceramics were rapidly sintered in a 2.45GHz microwave oven without no addition of lead to the atmosphere and afterwards the piezoelectric properties were investigated. The specimens were sintered between 1050 and 1130$^{\circ}C$ with the sintering time totaling less then 20 minutes, reducing processing times and costs from those of established methods. The relative dielectric constant, mechanical quality factor and electro-mechanical coupling factor of the PZT specimens at 1090$^{\circ}C$ were 1990, 80,0.53 respectively, which is comparable to conventionally sintered values.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.21-26
• /
• 1986

In this study the system of $Pb(Mn_{1/3} Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ piexoelectric ceramics was made in the radial mode disk and attenuation characteristic of the desinged ladder type filter was investigated. What is more temperature dependance of resonant frequency and variation of resonant frequency was examined by chan-ging the electrode diameter of piezoelectric resonator. (A Group : De=11mm, B Group : De=7.5mm and C Gro-up : De=5.5mm) Upon investigation it was the following. The center frequency of A, B and c filter showed up in the 200KHz, 270KHz and 380KHz respectively. As the electrode diameter decreased center frequency in creased abruptly. As the Co_2/Co1 increased attenuation characteristics and selectivity was improved. As the x=50. resonant frequ-ency invaried with variation of temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.446-450
• /
• 2001

In this study, microstructural and electrical properties of (Pb)(La,Nd)$TiO_3$ cerramics were investigated as a function of CuO addition. Taking into consideration Tc of $325^{\circ}C$, dynamic range of 49dB( at the wafer form) and density of $7.71g/cm^{3}$, it can be concluded that the specimen S2 sintered at $1200^{\circ}C$ is the best for the resonator application, Dynamic characteristics of energy-trapped 20MHz SMD type resonator as a function of internal dot size variation were also investigated. Dynamic range characteristics showed the highest value of 60.72dB at S2-4(dot size 1.13mm).