• 한국음향학회지
• /
• 제23권4호
• /
• pp.274-281
• /
• 2004

본 연구에서는 상용 유한 요소 해석 프로그램인 PZflex를 이용하여 1-3형 압전 복합체를 설계하고 이를 바탕으로 단일소자 의료용 초음파 트랜스듀서를 개발하였다. 유한요소 해석법을 이용하면 기존의 이론적 방법에 의한 압전 복합체 설계의 여러 제약 사항을 극복하고, 실용적인 해석이 가능함을 확인하였다. 또한 유한요소법에 의한 설계 결과를 바탕으로 실제 제작된 압전 복합체와 탐촉자의 성능을 비교함으로써 그 설계법의 타당성을 검증하였으며, 이론적 방법에 의한 특성과도 비교함으로써 유한요소 해석법의 우수성도 확인하였다.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.201-208
• /
• 2006

Recently, there are many studies for the micro-machining using Piezo actuator. However, because of its step-by-step motion, it is nearly impossible to increase the machining accuracy for a circular path. To increase the accuracy, it is well known that it is necessary the finer and synchronous movement for x-y axes. Therefore, this paper proposes an adaptive control for finer movement of the actuator, and realizes a synchronous control for the x-y axes. The experimental results show that the machining accuracy is remarkably improved.

• 한국분무공학회지
• /
• 제15권1호
• /
• pp.25-30
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for driving the injector.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.1-9
• /
• 1993

Since most people spend a large majority of their time indoors (at least in the industrialized countries), indoor air may affect human health more than outdoor air. This study was carried out to characterize the reference and equivalent methods against the low volume method which was promulgated by the Ministry of Health and Social Affairs. The Laser and Piezo air sampler offer the advantage of real time data and low labor costs. The arithmetic mean concentrations were found to be 102.9% (Laser-2 min method) and 65.9% (Piezo method) against low volume method (100%). The statistical analysis procedure for this comparision is linear regression. The linear regression line of low volume method had slopes of 0.5487 and 0.9697 and Y intercepts of 0.0266 and 0.0110 $\mu$g/m$^3$ about Laser (2 min) and (24 h) method respectively. And the correlation coefficients were 0.7271 and 0.9433.

• Composites Research
• /
• 제30권1호
• /
• pp.15-20
• /
• 2017

본 논문에서는 지능 구조물 작동기의 성능 향상을 위해 압전 단결정을 적용한 압전 복합재료 작동기 LIPCA-S2를 설계, 제작하고 성능을 측정하였다. 외팔보 형태로 고정된 LIPCA-S2의 끝단 변위를 예측하기 위하여 공급 전압에 대한 압전 재료 작동층의 변형을 기반으로 곡률 변화 예측 모델을 적용하였으며, 실제 작동기의 성능을 측정하여 두 결과를 비교하였다. 외팔보 상태의 LIPCA-S2의 끝단 처짐에 대한 결과를 비교하였을 때, 예측 결과가 측정 결과에 비하여 4배 정도 크게 예측되었음을 확인하였다. 각 결과의 차이는 LIPCA-S2 내부에 삽입된 압전 단결정에 작용하는 압축 응력에 대하여 압전 단결정 특성이 영향을 미치는 것이라 가정하여, LIPCA-S2를 제작하는 과정에서 발생된 잔류 응력과, 작동층에 전압을 가하며 작동기를 구동했을 때 발생하는 응력 변화를 고전 적층 이론을 통해 계산하였다. 박판 압전 단결정에 평면 방향으로 압축 응력이 변할 때, 압전 변형상수의 변화와 탄성계수의 변화를 측정하였고, 이러한 특성 변화를 고려한 새로운 예측 모델을 활용한 예측 결과는 실제 측정값에 근접함을 알 수 있었다.

• Computers and Concrete
• /
• 제26권1호
• /
• pp.75-94
• /
• 2020

The aim of this research is to investigate free vibration of a novel five layer Timoshenko microbeam which consists of a transversely flexible porous core made of Al-foam, two graphen platelets (GPL) nanocomposite reinforced layers to enhance the mechanical behavior of the structure as well as two piezo-magneto-electric face sheets layers. This microbeam is subjected to a thermal load and resting on Pasternak's foundation. To accomplish the analysis, constitutive equations of each layer are derived by means of nonlocal strain gradient theory (NSGT) to capture size dependent effects. Then, the Hamilton's principle is employed to obtain the equations of motion for five layer Timoshenko microbeam. They are subsequently solved analytically by applying Navier's method so that discretized governing equations are determined in form of dynamic matrix giving the possibility to gain the natural frequencies of the Timoshenko microbeam. Eventually, after a validation study, the numerical results are presented to study and discuss the influences of various parameters such as nonlocal parameter, strain gradient parameter, aspect ratio, porosity, various volume fraction and distributions of graphene platelets, temperature change and elastic foundation coefficients on natural frequencies of the sandwich microbeam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.296-297
• /
• 2007

PMN-PZT 단층 및 다층 후막을 알루미나 기판위에 켄티레버 형태로 제작하여, 외부의 미소 진동에 의한 마이크로 발전 특성을 고찰하였다. 미소 변위에 의한 마이크로 발전 특성은 켄티레버의 무게(load), 진동수, 켄티레버의 길이 등에 밀접한 영향을 미치므로 이에 준한 요소를 고려하여 여러 가지 변수로 실험하였다. 연구 결과 서로 다른 소재의 기판과 발전체의 계면 분리 현상, 전극과 발전체의 분리 현상, 소결 온도 등이 소재 측면의 문제점으로 크게 대두되었으며, $5{\times}20mm$ 기판위에 형성된 발전체의 특성은 $1.1k{\Omega}{\sim}1M{\Omega}$의 부하에 따른 전압변동이 0.01V에서 3.6V로 큰 차이가 났다. 켄티레버의 로드의 변화에 대한 피크 전압은 $1.9{\sim}{\pm}2.8V$로 조사되었으며, 출력은 $0.45{\sim}4{\mu}W$로 측정되었다. 그러나 이런 외부 조건 보다 압전체의 공진 특성과 진동수는 가장 중요한 요인으로 나타났으며, 몇몇 문제가 해결될 경우 마이크로 발전소자로의 활용 가능성이 있는 것으로 조사되었다.

• 센서학회지
• /
• 제25권1호
• /
• pp.35-40
• /
• 2016

Pulse diagnosis is one of the representative diagnostic methods in Oriental medicine. In this study, a pulse pressure sensor array coated with silicone, which includes 6 piezo-resistive sensors and 1 thermistor, is fabricated for pulse measurement. It is necessary to coat the pulse sensor array with silicone to avoid the fracture or damage of pressure sensors when the sensor is in contact with the skin and a constant pressure is applied. However, the silicone coating on the pulse sensor array can cause signal interference among the sensors in the pulse sensor array. The interference number (IN), a calculation for expressing the degree of interference among channels, is changed according to the silicone thickness on the pulse sensor array. The IN is increased by a thick silicone coating, but the fabrication error, an important index for the mass production of the sensor array, is reduced by the thickness of the silicone coating. We propose that the thickness of the silicone on the pulse sensor array is an important consideration for the performance of the fabricated sensor and manufacturing repeatability.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.110-115
• /
• 2019

$Pb(Sb_{0.5}Nb_{0.5})_x(Zr_{0.51}Ti_{0.49})_{1-x}O_3$ (abbreviation: PSN-PZT) ceramics were synthesized, using conventional bulk ceramic processing technology, with various PSN doping contents. The maximum density of PSN-PZT was 97% of the theoretical density in the samples sintered at $1,250^{\circ}C$. The maximum values of the piezoelectric properties achieved using the conventional processes were: $k_p$ of 0.625, $d_{33}$ of 531 pC/N, and $g_{33}$ of $33mV{\cdot}m/N$. Finally, we fabricated a piezo-speaker with the optimized PSN-PZT ceramics. The SPL of the speaker was measured at a distance of 1 m, with a driving voltage of $40V_{rms}$ in the frequency range of ~300 Hz to 9 kHz. The measured $SPL_{max}$ was at a very high level (95 dB), which was superior in quality in comparison with those of other commercial products.

• 센서학회지
• /
• 제26권2호
• /
• pp.107-113
• /
• 2017

Energy source of a piezo-electric harvester is vibration. Sources of vibration are machineries operated with high frequencies, constructions and people operated with low frequencies and etc. In this study, we tried to figure out power generation properties over vibrations upon angles of a piezo-cantilever for applying them to movements of the construction and/or people, which are vibration sources at low frequencies. A uni-morph cantilever with a $59mm{\times}29mm{\times}0.2mm$ piezo-electric element attached on a $71mm{\times}46mm{\times}0.25mm$ copperplate was used. A spring was attached to the lower side of the cantilever and a mass was attached on the opposite side. Also, a structure with a specific angle which is an angle in between the ground and the cantilever was prepared and then, connected to a spring or the cantilever. Then, this structure was divided into the A-type and B-type and excited in the direction of z- axis. After that, the angle between the ground and the cantilever was changed and excited by 1 to 10 Hz upon the existence of a spring and/or a mass to compare power generation properties.