• 한국산업정보학회논문지
• /
• 제5권3호
• /
• pp.51-55
• /
• 2000

본 연구는 전자라이터용 에폭시 정량공급장치의 개발에 관한 것으로써 기존의 수작업에 의한 생산을 자동화함으로 하여 품질의 균일화를 도모하고 또한 납기준수를 위한 생산성 향상에 기반을 둔 개발로서 전자라이터의 핵심 부품이라고 할 수 있는 Piezo ignitor절연부에 에폭시를 정량으로 주입할 수 있게 함으로서 품질 및 생산목표를 달성하고 기업의 이윤을 극대화하는데 맞추었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 추계학술대회
• /
• pp.66-69
• /
• 1991

This paper describes a design of transducer for non-invasively detecting pressure radial pulse wave in aterial system and a recording system that for the studing the aterial pulse diagnosis of korean traditional medicine. The mechanism of transducer is composed of sensing mechanism, pressure sensor, conditioning amplifier. The variation of radial pulse pressure in the sensing mechanism is converted to the electric signal by piezo-resistive pressure sensor and it converted to the digital signal after preprocessing via A/D converter. The converted signals inputed to the computer as data files and then it display to the monitor for waveform watching and this datas can be used as the aterial pulse diagnosis data. This system effectively detect non-differential radial pulse wave and we conside that if analizing the recorded radial pulse wave, compared each other, it can be helpful in quantify radial pulse wave diagonosis of the Korean traditional medicine.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.91-97
• /
• 2012

근래의 전기 전자 제품은 기능은 향상되는 반면 크기는 소형화되는 추세에 있다. 기존 입체 형태의 음향 신호 재생 장치로서의 엑츄에이터 대신 압전 소자를 이용한 스피커가 개발되기 시작하였다. 압전 소자는 압전 특성을 갖는 물질로서 물체의 외부에서 전압을 가할 때 기계적인 변형을 일으키는 특징(즉 피에조 특징)을 이용한다. 초기의 필름 스피커는 화학적 성질의 한계로 인하여 전도성 고분자 막을 형성하기 힘들다는 한계가 있었고, 도포한 두께를 균일하게 유지하기 힘들었으며, 음향 신호의 출력과 동작 주파수의 한계가 있다는 등의 종래 기술의 문제점을 해결하기 위해, 전도 물질과 피에조 물질(필름)의 결합력을 증가시킴으로써 전도체의 저항을 줄이고 주파수 영역을 확장하고자 한다. 피에조 필름의 표면 접착력을 향상시키고, 고분자 전도체 막의 흡착력을 증가시킴으로써 음향시스템의 출력 향상을 위해 코로나 표면처리방식에 의한 표면 특징을 변화시킴으로써 출력개선을 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.109-109
• /
• 2009

This paper represented driving characteristic of a thin-type ultrasonic motor by fabricating and utilizing two kinds of drivers which could generate sinusoidal wave, square wave, respectively. A thin brass plate was used as a cross shaped vibrator and sixteen ceramic plates were attached on upper and bottom side of the brass plate. From the thin stator, elliptical displacements of the four contact tips were obtained. Speed, torque, and current were measured by applying sinusoidal waves through driving equipment such as function generator, power amplifier: to measure characteristic of the motor. As a result, the speed and the torque changed linearly at either driving frequency of 88.6 ~ 87.6[kHz] or voltage of 24~36[V]. Two-drivers which generate sinusoidal waves and square waves were designed respectively, and then were compared through some experiments in order to be put to practical use. In conclusion, the drivers had similar characteristic of speed-torque at similar frequency and voltage. It was able to control the motor linearly by using the driver generating square wave among two-drivers. Besides, it also was possible to make the drivers smaller.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.185-185
• /
• 2009

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. Using the flexural vibration mode of PZT bar, a piezopump is successfully made. The PZT bar is polarized with thickness direction. The proposed structure for the piezo-pump consists of an input and an output port, piezoelectric ceramic actuator, actuator support, diaphragm. The traveling flexural wave along the bar is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. Fluid is drawn into a forming chamber, eventually the forming chamber closes trapping the fluid therein. The finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software. Components of piezopump were made, assembled, and tested to validate the concepts of the proposed pump and confirm the simulation results. The performance of the proposed piezopump the highest pressure level of 83.4kHz.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.909-916
• /
• 2005

The structural and electrical property of RF magnetron sputtered ZnO thin film have been studied as a function of RF power, substrate temperature, oxygen/argon gas ratio and film thickness at constant sputtering power, sputtering working pressure and target-substrate distance. To analyze a crystallo-graphic properties of the films, $\theta$/2$\theta$ mode X-ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity and surface roughness highly depended on oxygen/argon gas ratio. The resistivity of ZnO thin film(6000 ${\AA}$) rapidly increased with increasing oxygen ratio and the resistivity value of $9 {\ast} 10^7 {\Omega}cm$ was obtained at a working pressure of 10 mTorr with the same oxygen/argon gas ratio. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with the same oxygen/argon gas ratio showed the excellent roughness value of 28.7 ${\AA}$. With increase of the substrate temperature, The C-axis preferred orientation of ZnO thin film increases and the resistivity decreases due to deviation from the stoichiometric ZnO due to oxygen deficiency.

• 한국광학회지
• /
• 제12권3호
• /
• pp.184-189
• /
• 2001

편광자나 검광자가 장착된 모터를 회전시키는 기계적인 변조방식이나 압전소자에 조화진동하는 교류전압을 가하는 위상변조방식에 기초를 둔 일반적인 편광변조 및 편광상태 측정 방식에 의존하지 않고 움직이지 않는 광분할기와 편광자를 통과한빛의 세기를 측정하는 DOAP 방식으로 편광상태를 측정하기 때문에 광검출소자 및 전자회로의 반응시간에 의해 그 신간분해능이 결정되는 새로운 방식의 초고속 다원계를 설계하였다. 이 초고속 타원계는 수 ns의 시간분해능을 가지고 있음을 확인하였으며 상변화기구 같은 동적기구를 연구하는 도구로의 응용 가능성을 검토하였다.

• 한국전기전자재료학회논문지
• /
• 제11권3호
• /
• pp.221-228
• /
• 1998

In this study, the $\beta$-Polyvinylidene fluoride(PVDF) thin films were fabricated by physical vapor deposition method. Also, the properties of dielectric relaxation were studied to understand carrier's behavior of PVDF thin films, to be regarded as the excellent piezo and pyroelectricity. In the process of vapor deposition, the $\beta$-PVDF thin films have been fabricated under the condition of the substrate temperature at 3$0^{\circ}C$, the applied electric field at 142.8kV/cm and the pressure at 2.0${\times}10^{-5}$torr. The dielectric properties of PVDF have been studied in the frequency range 10Hz to 1MHz at temperature from 30 to $100^{\circ}C$. The relative dielectric constant of $\alpha$ and $\beta$-PVDF were 6.8 and 9.8, respectively, under a frequency of 1kHz. Such a phenomenon was caused by the decrease in intermolecular forces originated by the phase-transition from the TGTG' molecular conformation to the TT planar zig-zag conformation. And the relative dielectric constant is increased as a measuring temperature increases, because of the reduction of relaxation time caused by the decrease of intermolecular force.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.946-949
• /
• 2003

This paper reports on the fluid flow simulation results of a multilayer type piezoelectric valve. The mechanical and fluidic analysis are done by finite element method. The designed structure is normally closed type using buckling effect, which is consist of three separate structures; a valve seat die, an actuator die and a MLCA(Multilayer Type Ceramic Actuator). It is confirmed that the complete laminar flow and the lowest flow leakage are strongly depend on the valve seat geometry. In addition, turbulent flow was occurs in valve outlet according to increase seat dimension, height and inlet pressure. From this, we was deducts the optimum geometry of the valve seat and diaphragm deflection that have an great influence fluid flow in valve. Thus, it is expected that our simulation results would be apply for piezoelectric applications such as valve and pump, fluidic control systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.735-738
• /
• 2003

Downsizing electronics requires precision position control with an accuracy of sub-micron order, which demands development of ultra-fine displacive devices. Piezoelectric transducer is one of devices transferring electric field energy into mechanical energy and being capable for fine displacement control. The transducer has been widely used as fine Position control device Multilayer piezoelectric actuator, one of typical piezo-transducer, is fabricated by stacking alternatively ceramic and electrode layers several hundred times followed by cofiring process. Electrode material should be tolerable in the firing process maintaining at ceramic-sintering temperatures up to $1100{\sim}1300^{\circ}C$. Ag-Pd can be used as stable electrode material in heat treatment above $960^{\circ}C$. Besides, adding small quantity ceramic powder allow the actuator to be fabricated in a good shape by diminishing shrinkage difference between ceramic and electrode layers, resulting in avoidance of crack and delamination at and/or nearby interface between ceramic an electrode layers. This study presents synthesis of nano-oxide-added Ag/Pd powders and its feasibility to candidate material tolerable at high temperature. The powders were formed in a co-precipitation process of Ag and Pd in nano-oxide-dispersed solution where Ag and Pd precursors are melted in $HNO_3$ acid.