• 제목/요약/키워드: Piezo Sensor

검색결과 170건 처리시간 0.033초

마이크로 다공성 압전 진동자를 이용한 발향장치 설계 (Development of Scent Display Device using Micro-pore Piezo Actuator)

  • 이영준;임승주;김민구;이해룡;김정도
    • 센서학회지
    • /
    • 제25권6호
    • /
    • pp.399-405
    • /
    • 2016
  • Scent diffuser using micro-pore piezo actuator achieved a commercial success because of its cheap production cost, but it is easy to be use for IT-based contents due to difficulty of scent intensity control. To solve this problem, we control the emission amount of scent diffuser by changing amplitude and frequency of input voltage applied to micro-pore piezo actuator. And, we analyzed the effect of density of cotton core on emission amount and a relationship between hole-size of mesh in piezo actuator and viscosity of scents to design a mechanically optimal scent device.

매트릭스형 피에조센서를 이용한 복합재료 AE신호 분석에 관한 연구 (A Study on AE Signal Analysis of Composite Materials Using Matrix Piezo Electric Sensor)

  • 유연호;최진호;권진회
    • 비파괴검사학회지
    • /
    • 제27권1호
    • /
    • pp.1-7
    • /
    • 2007
  • 섬유강화 복합재료가 항공기, 우주 구조물, 로봇 팔 등에 널리 사용됨에 따라 복합재료의 신뢰도와 안전성을 향상시키기 위하여 이에 대한 비파괴검사법은 매우 중요한 연구분야로 대두되고 있다. AE법은 복합재의 균열, 섬유 또는 수지재의 파손, 층간분리 등의 발생 및 성장과정에서 발생되는 탄성파로 인한 스트레인 에너지를 검출하는 방법이다. 본 논문에서는 $8{\times}8$ 매트릭스형 피에조 센서를 사용하여 인장시험 하에서 발생되는 AE신호를 측정하고 분석하였다. 이를 위하여 AE신호의 전달거리를 제어할 수 있는 전용회로를 설계하고 제작하였다. 또한 64채널의 AE신호를 획득하기 위하여 발광다이오드를 사용한 광학 저장장치를 구성하였다. 실험결과, $8{\times}8$ 매트릭스형 피에조 센서를 이용하여 복합재료에서 발생되는 AE신호의 발생지점과 전파경로를 효과적으로 검출할 수 있었다.

코골이용 압전센서를 이용한 수면무호흡 검출에 관한 예비 연구 (Sleep Apnea Detection Using a Piezo Snoring Sensor: A Pilot study)

  • 에르덴바야르;이효기;김호중;이경중
    • 대한의용생체공학회:의공학회지
    • /
    • 제35권4호
    • /
    • pp.75-80
    • /
    • 2014
  • This paper proposed a method that can automatically classify sleep apnea by using features extracted from pulse rate variability(PRV) signals induced from piezo snoring sensor for patients with obstructive sleep apnea(OSA). We have extracted eight features(NN, SDNN, RMSSD, NN10, NN50, LF, HF and LF/HF ratio) based on time and frequency analyses of PRV. Sleep apnea was classified by a linear discriminant analysis(LDA). A performance was evaluated using snore recordings from 13 patients with OSA (ages: $54.5{\pm}10.5$ years, body mass index: $26.3{\pm}2.5kg/m^2$, apnea-hypopnea index: $19.2{\pm}6.0/h$). The sensitivity and specificity were $78.9{\pm}0.9%$ and $78.9{\pm}0.9%$ for training set and $77.7{\pm}10.9%$ and $79.0{\pm}2.8%$ for test set, respectively. Our study demonstrated the feasibility of implementing a piezo snoring sensor based on a portable device as a simple and cost-effective solution for contributing to the OSA screening.

유전 알고리듬을 이용한 압전센서의 전극형상 최적화 (Electrode Shape Optimization of Piezo Sensors Using Genetic Algorithm)

  • 이기문;박현철;박철휴
    • 대한기계학회논문집A
    • /
    • 제30권6호
    • /
    • pp.698-704
    • /
    • 2006
  • This paper presents an electrode shape design method for the multi-mode sensors that could deteict the selected structural multiple modes. The structure used for this study is an isotropic cantilever beam type with a PVDF (polyvinylidene fluoride) which is bonded onto the structure as a sensor. The shape optimization problem is solved by using Genetic Algorithm (GA) with an appropriate objective function. The performance of analytical optimal shape sensor is compared with that of experimental work. The results show that the, obtained electrode shape sensors have good performance to detect the multiple vibration modes simultaneously.

루프검지기와 피에조 센서를 이용한 차량정보 수집 시스템 설계 (Design of Traffic Data Acquisition System with Loop Defector and Piezo-Electric Sensor)

  • 한경호;양승훈
    • 조명전기설비학회논문지
    • /
    • 제16권6호
    • /
    • pp.102-108
    • /
    • 2002
  • 본 논문에서는 지능형 교통 시스템(ITS)의 기본 정보인 차량정보와 도로정보를 실시간으로 제공하기 위하여 루프 검지기와, 피에조 센서를 사용한 차량정보 수집 시스템의 설계를 다루었다. 루프검지기와 피에조 센서를 도로차선마다 설치하고 프로세서와 입/출력 보드를 통하여 샘플링 주기에 의하여 센서의 신호를 읽어들여 차량 및 교통정보를 생성한다. 생성된 정보는 패킷형태로 만들어져 RS232C 직렬 통신과 모뎀을 통하여 원격에 있는 교통 관제시스템으로 전송된다. 이를 위하여 EISA BUS규격의 32채널 입/출력 보드와 차량정보 수집 프로그램을 설계하고 시뮬레이션 시스템에서 확인하였다.

압전 효과를 이용한 에너지 포집 시스템에 관한 연구 (A Study on the Energy Scavenging System Using Piezoelectric Effect)

  • 최범규;이제윤;이우훈;오재근
    • 한국정밀공학회지
    • /
    • 제25권2호
    • /
    • pp.115-122
    • /
    • 2008
  • Mostly used sensors have wired powering and two-way cable systems. It is difficult to employ wired sensor network in ubiquitous era because of a number of sensors and cables. Therefore, sensor networks move from wired systems to wireless systems for the future. However, the power source is a critical obstacle for wireless sensornodes. This research represents the new power source which supplies energy sensor node, maintains over 10 years, and thus replaces batteries with limit of lifetime. The system with piezo materials scavenges extra energies such as vibration and acceleration from the environment. Then it converts the scavenged mechanical energy to electrical energy for powering a sensor, a controller and a circuit for regulating voltage and transmitting sensor value. This study explains the properties of piezo material through theoretical analysis and experiments, and demonstrates powering sensor and transmitting data with stored energy (35mJ) for 14 sec. The developed system provides a solution to overcome the critical problem of making up wireless sensor networks.

M2M / IoT 디바이스의 정밀 위치와 자세 인식을 위한 6축 관성 센서 IC 설계 (Design of a 6-Axis Inertial Sensor IC for Accurate Location and Position Recognition of M2M/IoT Devices)

  • 김창현;정종문
    • 한국통신학회논문지
    • /
    • 제39C권1호
    • /
    • pp.82-89
    • /
    • 2014
  • 최근 M2M/IoT에 대한 관심이 높아지면서 디바이스의 위치와 자세 등을 인식할 수 있는 동작 인식 센서의 필요성이 대두되고 있다. 본 논문에서는 소형의 디바이스에 적합하도록 저잡음, 저전력, 초소형 6축 관성센서 IC를 구현하였다. 본 논문에서 구현된 IC는 3축의 압전형 자이로 센서와 3축의 압저항형 가속도 센서를 사용하며, 3축의 자이로스코프 감지 회로, 자이로스코프 센서 구동 회로, 3축의 가속도 감지 회로, 16bit sigma-delta ADC, 디지털 필터와 제어 회로로 구성되어 있다. 본 IC은 TSMC $0.18{\mu}m$ mixed signal CMOS공정으로 개발되었으며, STM사의 6축 관성 센서인 LSM330의 소비전류 6.1mA보다는 약 27% 낮은 4.5mA의 소비 전류로 동작한다.

Experimental evaluation of discrete sliding mode controller for piezo actuated structure with multisensor data fusion

  • Arunshankar, J.;Umapathy, M.;Bandhopadhyay, B.
    • Smart Structures and Systems
    • /
    • 제11권6호
    • /
    • pp.569-587
    • /
    • 2013
  • This paper evaluates the closed loop performance of the reaching law based discrete sliding mode controller with multisensor data fusion (MSDF) in real time, by controlling the first two vibrating modes of a piezo actuated structure. The vibration is measured using two homogeneous piezo sensors. The states estimated from sensors output are fused. Four fusion algorithms are considered, whose output is used to control the structural vibration. The controller is designed using a model identified through linear Recursive Least Square (RLS) method, based on ARX model. Improved vibration suppression is achieved with fused data as compared to single sensor. The experimental evaluation of the closed loop performance of sliding mode controller with data fusion applied to piezo actuated structure is the contribution in this work.

Piezo Sensor Signal에 의한 수면의 질 Algorithm에 관한 연구 (A Study on Sleep Quality Algorithm by Piezo Sensor Signal)

  • 변재령;조위덕;김영길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.324-326
    • /
    • 2011
  • 수면 중 생체 신호를 측정하는 것은 수면 장애 진단 및 치료의 중요한 부분을 차지하며, 전반적인 수면의 질을 판단하는 방법으로 사용되고 있다. 현재 수면다원검사와 같이 수면중 생체 신호를 측정하는 방법은 몸에 전극을 부착하는 접촉식 방법이 사용되고 있다. 이는 수면 중 움직임에 제약을 받고, 매 측정 시 마다 탈부착을 해야 하는 번거러움과 고통을 유발하게 된다. 이러한 필요성으로 인해 무구속적 방식으로 생체 정보를 획득하려는 연구가 활발히 진행되고 있는 상태이다. 따라서 본 논문에서는 필름 타입의 압력센서인 피에조 (Piezo)를 침대에 설치하여 직접적인 접촉과 구속감이 없이 분당 심박 수를 산출하고, 호흡의 유무를 판단하는 방법에 대해 제안하였다.

  • PDF

압전센서와 액츄에이터를 이용한 복합재 평판의 진동제어 (Vibration Control of a Composite Plate with Piezoelectric Sensor and Actuator)

  • 권대규;유기호;이성철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.207-210
    • /
    • 2002
  • This paper is concerned with the experiments on the active vibration control of a plate with piezoceramic sensors and actuators. The natural frequencies of the composite plate featured by a piezo-film sensor and piezo-ceramic actuator are calculated by using the modal analysis method. Modal coordinates are introduced to obtain the state equations of the structural system. Six natural frequencies were considered in the modelling, because robust control theory which has inherent robustness to structured uncertainty is adopted to suppress the transients vibrations of a glass fiber reinforced(GFR) composite beam. A robust controller satisfying the nominal performance and robust performance is designed using robust theory based on the structured singular value. Simulations were carried out with the designed controller and effectiveness of the robust control strategy was verified by results.

  • PDF