Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Energy Scavenging System Using Piezoelectric Effect

압전 효과를 이용한 에너지 포집 시스템에 관한 연구

  • Published : 2008.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Mostly used sensors have wired powering and two-way cable systems. It is difficult to employ wired sensor network in ubiquitous era because of a number of sensors and cables. Therefore, sensor networks move from wired systems to wireless systems for the future. However, the power source is a critical obstacle for wireless sensornodes. This research represents the new power source which supplies energy sensor node, maintains over 10 years, and thus replaces batteries with limit of lifetime. The system with piezo materials scavenges extra energies such as vibration and acceleration from the environment. Then it converts the scavenged mechanical energy to electrical energy for powering a sensor, a controller and a circuit for regulating voltage and transmitting sensor value. This study explains the properties of piezo material through theoretical analysis and experiments, and demonstrates powering sensor and transmitting data with stored energy (35mJ) for 14 sec. The developed system provides a solution to overcome the critical problem of making up wireless sensor networks.

Keywords

References

  1. Oh, J. G., 'SAW Based Passive Radio Sensors using Energy Gathering Method,' Ph. D. Thesis, University of Sogang, pp. 25-29, 2005
  2. Ong, K. G., Grimes, C. A., Robbins, C. L. and Singh, R. S., 'Design and application of wireless, passive, resonant-circuit environmental monitoring sensor,' Sensors and Actuators , Vol. 93, No. 1, pp. 33-43, 2001 https://doi.org/10.1016/S0924-4247(01)00624-0
  3. Stangel, K., Kolnsberg, S., Hammerschmidt, D., Hosticka, B. J., Trieu, H. K. and Mokwa, W., 'A programmable intraocular CMOS pressure sensor system implant,' IEEE J. of Solid State Circuits, Vol. 36, No. 7, pp. 1094-1100, 2001 https://doi.org/10.1109/4.933466
  4. Paradiso, J. A., Hslao, K., Strickon, J., Lifton, J. and Adler, A., 'Sensor systems for interactive surfaces,' IBM Systems Journal, Vol. 39, No. 5, pp. 892-914, 2000 https://doi.org/10.1147/sj.393.0892
  5. Pohl, A., 'A Review of Wireless SAW Sensors,' IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, pp. 317-332, 2000 https://doi.org/10.1109/58.827416
  6. Stoyanov, P. G. and Grimes, C. A., 'A remote query magnetostrictive viscosity sensor,' Sensors and Actuators, pp. 8-14, 2000 https://doi.org/10.1016/S0924-4247(99)00288-5
  7. Jain, M. K. and Grimes, C. A., 'A Wireless Magnetoelastic Micro-Sensor Array for Simultaneous Measurement of Temperature and Pressure,' IEEE Trans. on Magnetics, Vol. 37, No. 4, pp. 2022-2024, 2001 https://doi.org/10.1109/20.951041
  8. Roundy, S., Wright, P. K. and Pister, K. S. J., 'Micro-electrostatic vibration-to-electricity converter,' Proceeding of IMECE 2002 ASME international mechanical engineering congress & exposition, pp. 1-10, 2002
  9. Bedford, A. and Drumheller, D. S., 'Introduction to elastic wave propagation,' John Wiley & Sons, pp. 43-82, 1996
  10. Shenck, N. S. and Paradiso, J. A., 'Energy Scavenging with Shoe-Mounted Piezoelectrics,' IEEE Micro, Vol. 21, Issue 3, pp. 30-41, 2001 https://doi.org/10.1109/40.928763
  11. Sodano, H. A., Inman, D. J. and Park, G. H. 'Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries,' Journal of Intelligent Material Systems and Strucutres, Vol. 16, No. 10, pp. 799-807, 2005 https://doi.org/10.1177/1045389X05056681