• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.505-508
• /
• 2002

AN EMBEDDED PC-BASED HARDWARE AND SOFTWARE SYSTEM HAS BEEN DEVELOPED TO AUTOMATE THE DATA ACQUISITION AND ANALYSIS OF BRAKE SQUEAL. THE DEVELOPED SYSTEM INTEGRATES ADVANCED SIGNAL CONDITIONING HARDWARE AND SOFTWARE TO ACQUIRE BRAKE NOISE AND VIBRATION DATA RAPIDLY, CONSISTENTLY AND OBJECTIVELY. A SPECIAL PEAK-PICKING ALGORITHM IS USED TO DETERMINE WHEN BRAKE NOISE OCCURS DURING A STOP EVENT AND ACTUALLY DEFINE FROM WHICH CORNER OF THE VEHICLE IT ORIGINATES. A SPECIAL NOISE-RATING TABLE IS FEATURED TO ENABLE THE USER TO DEVELOP CORRELATIONS BETWEEN DRIVER RATINGS AND OBJECTIVE MEASUREMENTS.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.129-142
• /
• 2003

The SCM is that Supply Chain Network is Promptly and Voluntarily Optimized in Unstable Market Change Environment. The Cash flow Efficiency of Hole Supply Chain Network is Improved by Changing the Information and Changing the Foundation of Business Processes. The Role of WMS has been Changing Importantly with the Introduction of SCM. WMS Needed to Change to the Information Center in Order to Change Information in Real Time and the WMS of Information Storing in Order to Support an Idea Decision. This Development was Defined about the Importance of WMS in SCM Environment. The Criterion of Valuation is Normally Measured Time between Taking a Order Receive and Bringing the Items to Customer. The Decreasing Move Time of Order Picker in Warehouse is Directly Influence to the Job Execution. So, this Research is Defined about the Optimized Route of Order Picker and Suggests Algorithm. To do this, Past Algorithm is Studied. It's Easy to Introduce and this Study is Looking for Method about the Noticing of Order Picker. The Algorithm will Improve to be Adapt to Standard Process System.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.229-242
• /
• 2011

The assorting process in distribution center is one of the most difficult and time-consuming process. The improvement of assorting productivity is a core element which decides efficiency of a distribution center. The time to shipping from receiving depends on assorting such as sorting by customer. To enhance efficiency of assorting typically uses the put to light system composed of computer and digital indicator etc. Generally the layout of put to light system has been performed rather than scientific analysis by a common experience. Therefore, this study analyzes the impact of assorting performance by the number of aisle in assorting process of put to light system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.69-72
• /
• 2008

EZTOMO is a crosswell seismic tomography software system. The system has capability of event picking, raytracing, inversion, error analysis, and visualization of the processing results. Waveform of the first arrival signal has been utilized to select the event of the first motion, and uncertainty measured in estimation of the first breaks has been utilized to improve the inversion process.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.29-35
• /
• 2018

This paper presents the design of attachments for dual arms of disaster responding heavy machine. The heavy machine handles a variety of tasks such as cutting, shredding, picking and moving in unstructured environment. Despite the need for rapid response, the heavy machine has difficulty in repeatedly replacing the attachment depending on the task. Thus, we propose a method to solve this physical and functional contradiction relation by using TRIZ separation principles. Above all, the existing equipment and the required working scenarios were surveyed and summarized in order to separate the attachments functionally for right-handed, left-handed and two-handed operation. Then, we proposed the design directions and conceptual design as following: multi function type attachment A, for precise operation and various operations; grab type attachment B, for grasping irregular objects and auxiliary device for both arms to handle bulky objects.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1211-1219
• /
• 2015

In a hidden Markov model-based speech synthesis system using a two-band excitation model, a maximum voiced frequency (MVF) is the most important feature as an excitation parameter because the synthetic speech quality depends on the MVF. This paper proposes an enhanced MVF estimation scheme based on a peak picking method. In the proposed scheme, both local peaks and peak lobes are picked from the spectrum of a linear predictive residual signal. The average of the normalized distances of local peaks and peak lobes is calculated and utilized as a feature to estimate an MVF. Experimental results of both objective and subjective tests show that the proposed scheme improves the synthetic speech quality compared with that of a conventional one in a mobile device as well as a PC environment.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.4
• /
• pp.1141-1151
• /
• 2008

Data mining is the process of sorting through large amounts of data and picking out useful information. One of the well-studied problems in data mining is the exploration of association rules. An association rule technique finds the relation among each items in massive volume database. Some interestingness measures have been developed in association rule mining. Interestingness measures are useful in that it shows the causes for pruning uninteresting rules statistically or logically. This paper propose a conditional pure confidence to evaluate association rules and then describe some properties for a proposed measure. The comparative studies with confidence and pure confidence are shown by numerical example. The results show that the conditional pure confidence is better than confidence or pure confidence.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.326-332
• /
• 1999

In order to develope useful components and to apply in food additives, various components in the leaves of baechohyang were determined according to picking date. Moisture and ash were reached to 74~82%, 1.5~3.4%, respectively, and major sugars were fructose, glucose, sucrose, and maltose. Glutamic, aspartic acid, and leucine constituted the main component amino acids and their contents were relatively higher in the samples of summer and young leaves. Among free amino acids, histidine showed the highest components and methionine were the lowest. Potassium, calcium, and sodium were main mineral components. The content of ascorbic acid were 6.6~9.2mg% and seasonal variations were negligible. Muture leaves contained more polyphenols as much as 108~181mg% and the amount of bound fractions were much more. Periodic evaluation of phenolic compounds were made and major components of bound fractions were caffeic, syringic, and ferulic acid.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.861-863
• /
• 1998

F.I(Fault Indicator) is equipped in automatic switchs for Distibution Automation System(DAS), and plays important role of providing the information for picking out a fault section. The restrictive sentence that F.I doesn't react for the inrush current is in the F.I specification. Nevertheless F.I has sometimes mal-functioned on the DAS in Kang-Dong branch office of KEPCO for latest 2 years. This Paper Proved the causes of the mal-function, and proposed the new F.I specification and operation methods against the mal-function causes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.171-172
• /
• 2015

Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, the waste porcelain is applied to the artificial stone and the durability property of the artificial stone according to it tries to be investigated.