• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1265-1266
• /
• 2012

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.622-632
• /
• 2005

Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.1009-1012
• /
• 1999

Recently, there is a strong need of DVD (Digital Versatile Disk) system of high density. high speed, and high accuracy System performances mostly depend on not only optical system, but also servo technology to drive it. Therefore, we investigate main technology concerned with optical pick-up unit based on 4.7GB DVD-RAM and analyzes technology of optical and servo systems that are required for high density high speed and high accuracy from the viewpoint of control. And then, we design a linear controller based on specification of 4.7GB DVD-RAM that is commercially available now. We analyze the dynamic characteristics of optical system that is coupled with control system and verify effect on performance indices of servo due to Parameter variation of pick-up by simulation. Finally, we will propose controller design specifications and provide direction of technical development for servo system and problems coupled with high capacity for 15GB level in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.481-484
• /
• 2004

이 논문에서는 소포 배달 서비스를 위한 인텔리전트 모니터링 시스템(Intelligent Monitoring and Control System; IMCS)에 대해 기술한다. IMCS 는 GIS, GPS 그리고 무선 통신 기술을 이용하여 택배의 접수와 배달 업무를 효율적이고 효과적으로 개발하기 위한 시스템이다. IMCS는 모두 세개의 서브 시스템으로 구성되어 있는데 접수와 배달 계획을 수립하는 PDPS(Pick-up and Delivery Planning System)과 접수/배달 현황과 차량의 위치를 파악할 수 있는 PDMS(Pick-up and Delivery Monitoring System), 그리고 개인휴대단말기(PDA)을 이용한 실시간 업무 처리 시스템인 MOCS(Mobile Operations and Communication System)으로 구성되어 있다. PDPS는 GIS와 최적화 알고리즘을 이용하여 접수와 배달을 위한 방문 순서와 경로 그리고 고객에게 방문할 예정시간 등을 생성한다. MOCS에서는 GPS와 무선 통신을 이용하여 업무 중 발생한 접수/배달 결과와 위치 정보를 실시간으로 PDMS에 전송하고 바코드 스캐닝과 전자 서명 등의 업무를 지원한다. PDMS에서는 수신한 정보에 따라 소포의 접수/배달 현황과 차량의 위치를 전자지도 상에 표현하고 업무 차량의 이동 궤적을 표시하여 계획된 경로와 비교하여 모니터링하고 관제할 수 있다. 현재 IMCS는 국내 한 우체국에서 시범 운영되고 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.770-775
• /
• 2014

According to ICNIRP guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields up to 300GHz, magnetic flux density which range from 3Hz to 150kHz are regulated to lower than $6.25{\mu}T$. In order to comply with its standard, OLEV(On-Line Electric Vehicle) have been designed considering EMF(Electro-Magnetic Field) reduction. However, if a current flowing in power line would be bigger for increasing power transfer efficiency, the established shield system no longer acts their role properly. In this paper, therefore, FCCL(Flexible Copper Clad Laminate) is applied to power line and pick-up devices to solve the problems. Though, the FCCL is normally utilized to insulator on circuit board, because of its high heat resistance characteristic, flexibility and thin properties, it makes effectiveness in the shielding device as well. 4 types of FCCL shielding structure are introduced to power line and pick-up devices. From the results, the FCCL which are placed in proposed positions shows maximum EMF reduction compared to the established shielding structure. Henceforth, if OLEV is applied FCCL shielding structure in practice, it will not only be more safe but also step forward to commercialization near future.

• Journal of Embryo Transfer
• /
• v.13 no.1
• /
• pp.77-86
• /
• 1998

A combined technology of transvaginal ovum pick-up(OPU) system with in vitro-oocyte manipulation technique can be used for improving reproductive efficiency in the cattle. The objective of this study was to establish a newly-conceived breeding program using OPU in the pregnant cows. The OPU trial was performed in pregnant cows every 10 days from 40 through 90 days of artificial insemination (Al), and number of follicles in ovary, number of retrieved oocytes and embryo development following in vitro-fertilization, were evaluated. Reduced number of follicles in the ovaries of pregnant cows was firstly detected from 70 days after A' and a significant (P<0.05) decrease in the follicle number (5.4 follicles /donor) was found at 90 days than at 40, 50, 60 and 80 days after Al (8.0~9.2). A similar pattern was also observed in the number of oocytes retrieved by OPU apparatus during experimental period. When retrieved oocytes were matured and inseminated in vitro with frozen bull semen, development of the oocytes to the blastocyst stage was not significantly affected by the retrieval time. Four embryos (morula or blastocyst stage) derived from oocytes retrieved from pregnant cows were nonsurgically transferred to four recipient cows on day 7 of estrus cycle. For the first time in Korea, three of four transferred embryos developed to live calves with normal physiological parameters. In conclusion, an effective breeding program employing pregnant cow can be developed by use of OPU trial and in vitro culture techniques of oocytes ; OPU system could be repeated in pregnant cows with no risk of abortion and viable offsprings were borne after transfer to the recipients.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1210-1217
• /
• 1999

This study was carried out to develop a newly designed ovum pick-up(OPU) instrument for ultrasound-guided transvaginal follicular aspiration in cows. This new instrument consists of out- & inner-layer stainless pipes and a grip with a trigger(hand) switch. Some gauge types of disposable needles and tubes can be attached to this inner pipe. With this instrument, while grasping an ovary with one hand, the other hand can handle in apiration and vacuum on/off with the least assitant's help. With this instrument the mean recovery rate of bovine follicular oocytes was 45.2%. In recovered oocytes, usable oocytes(Grade I & II) were 30.4% and this rate meant 1.4 oocytes per ovary. For 30 days after initial aspiration with this instrument, some adverse effects such as adhesion, hemorrhage, hematoma and other mass formation in/with ovaries were also examined by rectal examination, ultrasonographic and endoscopic images. Adhesion was found in one ovary 1 week after aspiration, and hemorrhagic lesion was found 1-2 days and petechia were found 3-5 days after aspiration and there was no remarkable adverse effects. It was found that this instrument could be applicable and safe for ovum pick-up in cows.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.183-188
• /
• 2004

Nowadays optical disc drives have become necessary. As the equipment is popular to use, competition of price and rotating rate have been harder and harder. Shock response analysis for the optical disk drives is rarely studied. In this paper the optical disk drive has 5-DOF system and each motion is presented by using Lagrange Equation. As the motion of the Pick up lens is important to read and write data, it needs to consider the pickup and disk. The lumped parameter model is compared with finite element model in order to make sure of the result. Results of the shock response analysis from various shock inputs are gotten.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2263-2265
• /
• 2000

본 연구에서는 광 픽업의 소형, 경량 제작을 위해 MEMS 기술을 이용하여 planar micro optics 방법으로 광 픽업을 구성하는 micro lens, actuator, beamsplitter 등을 설계, 제작하고 집적화한 픽업헤드를 구성하여 그 특성을 분석하였다. 특성분석 결과 disk에 focusing 되는 beam의 형상은 circle type의 비교적 양호한 결과를 얻을 수 있었고 beam spot size는 약 22$\mu m$로 실제 system에서 요구되는 0.9$\mu m$이내의 beam spot size에 비해 약 25배 가량 큰 beam spot size를 얻을 수 있었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.47-50
• /
• 2005

In this study, micro mirror array for small form factor optical pick-up was replicated by micro UV-molding. First, mold for micro mirror array was fabricated using micromachining. Also, to analyze the characteristics of the surface quality, flatness of replicated mirror surface were measured by white light scanning inteferometry system. The results show that the micro mirror array with a sufficient surface quality can be obtained by polymer replication process.