• Journal of Chest Surgery
• /
• 제15권4호
• /
• pp.432-439
• /
• 1982

Congenital posterolateral diaphragmatic hernia [Bochdalek hernia] is the result of a congenital diaphragmatic defect in the posterior costal part of the diaphragm in the region of the tenth and eleventh ribs. There is usually free communication between the thoracic and abdominal cavities. The defect is most commonly found on the left [90%], but may occurs on the right, where the liver often prevents detection. The male to female ratio is 2:1. Owing to the negative intrathoracic pressure, herniation of abdominal contents through the defects occurs, with resultant collapse of the lung. Shifting of mediastinum to the opposite side and compression of the opposite lung occurs. Most often these hernias are manifestated by acute respiratory distress in the newborn. A second, but less well recognized, group of patient with Bochdalek hernia survive beyond the neonatal period, usually present at a later time with "failure of thrive, intermittent vomiting, or progressive respiratory difficulty. " The diagnosis can often be made on clinical ground from the presence of respiratory distress, absence of breath sounds on the chest presence of bowel sounds over the chest . Roentgenogram of the chest confirm the diagnosis. Obstruction and strangulation have been reported but are rare. Treatment consists of early reliable identification of these congenital diaphragmatic hernia with high risk and surgical repairment. and postoperative pharmacological management with extracorporeal membranous oxygenation [=ECMO] support in the period of intensive care. On the surgical approach, for defects on left side, an abdominal incision is preferred, because of the high incidence of malrotation and obstructing duodenal bands. In the neonate, the operative mortality may be appreciable, but, later repair almost always is successful. During the period from 1972 to 1982, 4 cases of congenital Bochdalek hernia were experienced at the Kyung-Hee University Hospital.

• Structural Engineering and Mechanics
• /
• 제37권4호
• /
• pp.427-442
• /
• 2011

In fatigue life design of mechanical components, uncertainties arising from materials and manufacturing processes should be taken into account for ensuring reliability. A common practice is to apply a safety factor in conjunction with a physics model for evaluating the lifecycle, which most likely relies on the designer's experience. Due to conservative design, predictions are often in disagreement with field observations, which makes it difficult to schedule maintenance. In this paper, the Bayesian technique, which incorporates the field failure data into prior knowledge, is used to obtain a more dependable prediction of fatigue life. The effects of prior knowledge, noise in data, and bias in measurements on the distribution of fatigue life are discussed in detail. By assuming a distribution type of fatigue life, its parameters are identified first, followed by estimating the distribution of fatigue life, which represents the degree of belief of the fatigue life conditional to the observed data. As more data are provided, the values will be updated to reduce the credible interval. The results can be used in various needs such as a risk analysis, reliability based design optimization, maintenance scheduling, or validation of reliability analysis codes. In order to obtain the posterior distribution, the Markov Chain Monte Carlo technique is employed, which is a modern statistical computational method which effectively draws the samples of the given distribution. Field data of turbine components are exploited to illustrate our approach, which counts as a regular inspection of the number of failed blades in a turbine disk.

• Earthquakes and Structures
• /
• 제20권1호
• /
• pp.71-86
• /
• 2021

This paper focuses on the development and assessment of the expected damage for the rocking response of rigid anchored blocks, with irregular geometry and non-uniform mass distribution, considering the site conditions and the seismicity of Mexico City. The non-linear behavior of the restrainers is incorporated to evaluate the pure tension and tension-shear failure mechanisms. A probabilistic framework is performed covering a wide range of block sizes, slenderness ratios and eccentricities using physics-based ground motion simulation. In order to incorporate the uncertainties related to the propagation of far-field earthquakes with a significant contribution to the seismic hazard at study sites, it was simulated a set of scenarios using a stochastic summation methods of small-earthquakes records, considered as Empirical Green's Function (EGFs). As Engineering Demand Parameter (EDP), the absolute value of the maximum block rotation normalized by the body slenderness, as a function of the peak ground acceleration (PGA) is adopted. The results show that anchorages are more efficient for blocks with slenderness ratio between two and three, while slenderness above four provide a better stability when they are not restrained. Besides, there is a range of peak intensities where anchored blocks located in soft soils are less vulnerable with respect to those located in firm soils. The procedure used in here allows to take decisions about risk, reliability and resilience assessment of different types of contents, and it is easily adaptable to other seismic environments.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.22.1-22.12
• /
• 2021

Objectives: This study evaluated and compared the effects of radiation therapy on the dislocation resistance of AH Plus and BioRoot RCS applied to dentin and the sealer-dentin interface. Materials and Methods: Thirty single-rooted teeth were randomly assigned to 2 groups (n = 15 each): AH Plus (Dentsply DeTrey) and BioRoot RCS (Septodont). Each group was subdivided into control and experimental groups. The experimental group was subjected to a total radiation dose of 60 Gy. The root canals of all samples were cleaned, shaped, and obturated using the single-cone technique. Dentin slices (1 mm) were sectioned from each root third for the push-out test and scanning electron microscopy (SEM) was done to examine the sealer-dentin interface. The failure mode was determined using stereomicroscopy. Bond strength data were analyzed by the independent t-test, 1-way analysis of variance, and the Tukey post hoc test (α = 0.05). Results: Significantly lower bond strength was observed in irradiated teeth than non-irradiated teeth in the AH Plus group (p < 0.05). The BioRoot RCS group showed no significant reduction in bond strength after irradiation (p > 0.05) and showed a higher post-irradiation bond strength (209.92 ± 172.26 MPa) than the AH Plus group. SEM revealed slightly larger gap-containing regions in irradiated specimens from both groups. Conclusions: The dislocation resistance of BioRoot RCS was not significantly changed by irradiation and was higher than that of AH Plus. BioRoot RCS may be the sealer of choice for root canal treatment in patients undergoing radiation therapy.

• 대한기계학회논문집B
• /
• 제38권5호
• /
• pp.423-430
• /
• 2014

파이프 유동 내에서 일어나는 소음 및 진동현상의 경우 일반적으로 난류유동과 근처의 벽면사이의 유동유기진동에 의해 일어나게 된다. 복잡한 난류유동을 가지는 확장관의 단순한 경우에서 본 연구는 수행되었지만, 방사소음의 경우 주어진 모델에서 크기와 형상 그리고 두께 등에 상당히 영향을 받게 된다. 또한, 방사소음은 그 파가 퍼져나가면서 주위 시스템에 교란특성이나 불안정성을 야기시키게 되는데 결국 중요한 파단과 파손을 일으키게 된다. 본 연구는 다양한 상용프로그램들 (Fluent, NASTRAN, 그리고 VIRTUAL LAB)을 이용하여 이러한 현상을 파악하고자 하였다. 이 연구를 통해 유동소음에 있어 깔려있는 물리현상들을 이해하고자 하였다. 확장관의 경우 단면적의 급격한 변화에 의해 박리와 높은 압력강하를 겪게 되는데, 방사소음의 계산으로 이 방사소음의 크기가 100에서 500Hz영역에서 전체적으로 약 20dB정도 감소시킬 수 있는 것을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3648-3658
• /
• 2023

The early localization of a fuel subassembly with a failed (wet rupture) fuel pin is very important in reactors to limit the associated radiological and operational consequences. This requires a fast and reliable system for failure detection and their localization in the core. In the Prototype Fast Breeder Reactor, the system specially designed for this purpose is Failed Fuel Location Modules (FFLM) housed in the control plug region. It identifies a failed sub-assembly by detecting the presence of delayed neutrons in the sodium from a failed sub-assembly. During the commissioning phase of PFBR, it is mandatory to demonstrate the FFLM effectiveness. The paper highlights the engineering and physics design aspects of FFLM and the integrated simulation towards its function demonstration with a source assembly containing a perforated metallic fuel pin. This test pin mimics a MOX pin of 1 cm² of geometrical defect area. At 10% power and 20% sodium flow rate, the counts rate in the BCCs of FFLM system range from 75 cps to 145 cps depending upon the position of DN source assembly. The model developed for the counts simulation is applicable to both metal and MOX pins with proper values of k-factor and escape coefficient.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.76-76
• /
• 2010

무연솔더 재료를 자동차 전장품에 적용하기 위해서는 고온환경에 대한 내구성 및 진동 인자에 대한 영향을 고려해야한다. 특히, ELV(End of Life Vehicles) 지침이 개정됨에 따라 고온용 무연솔더 재료에 대한 재평가가 반드시 필요한 시점이다. 이에 대해 본연구에서는 현재 상용화 된 Pb-free솔더의 재료들 중 총 4종의 Solder을 선정하여 자동차 환경에 부합하는 진동조건하에서 시험해보았다. 그리고 미세조직의 특성, 접합부 형성시의 기계적 강도 및 접합부의 신뢰성을 평가하여 보았다. 각각의 조성에 대한 CHIP type과 QFP type의 실장부품을 준비하였으며, 각각의 조성별로 솔더 페이스트로 Daisy Chain PCB에 접합하여 조성에 따른 비교 데이터를 구축할 수 있었다. 리플로우 공정후 초기의 미세조직 및 전당강도, 저항값을 측정하여 진동시험에 따른 데이터와 비교하였다. 주파수는 10Hz~1,000Hz였으며, 진동가속도는 $29.4m/s^2$, 20시간의 랜덤진동이 적용되는 동안 챔버내의 온도는 상온으로 유지되었다. 진동시험과 이에 따른 저항측정을 통하여 진동 주파수와 시간에 따른 실장 부품이 받는 진동 영향과 실시간 저항값을 측정하였으며, 이때의 미세조직 비교를 통해 진동특성을 평가하였다. 진동 주파수에 따른 저항값의 변화가 있었으며, 진동전후 전단강도에도 영향을 주었다. QFP type에서는 SAC105가 진동에 가장 취약하였으며, CHIP type에서는 SACX0307이 진동에 가장 취약하였다.

• 융합보안논문지
• /
• 제12권3호
• /
• pp.75-83
• /
• 2012

높은 네트워크 대역폭과 고품질을 요구하는 고에너지 물리, 기상 기후 등과 같은 특정 연구 그룹간의 논리 네트워크를 구축하여, 일종의 특정 그룹별 사설 네트워크 구축과 운용이 최근 많이 요구되고 있다. 지금까지 국내에서는 KREONET과 같은 국가연구망이 중심이 되어 이러한 대용량 사설 네트워크 서비스를 제공하고 있으나 이러한 사설 네트워크에 대한 체계적이고 표준화된 구축 및 관리 방법이 없어 이에 대한 체계적인 연구가 시급한 실정이다. 이를 위해 본 논문은 L2 기반에서 다양한 그룹별 논리 네트워크를 구성하는 핵심 서비스 요소와 표준 프로토콜을 제시하고, 구성된 논리 네트워크 정보를 관리 모니터링 할 수 있는 시스템 구조를 제시하였다. 또한 본 논문은 네트워크 인프라 자원과 관련된 망의 운영정보, 구성정보, 성능정보, 장애정보 등에 대한 정보를 통합적으로 관리할 수 있는 표준화된 명세시스템 구조를 제시하였다.

• 대한간호학회지
• /
• 제3권1호
• /
• pp.53-66
• /
• 1972

There is an urgent need to improve the tool predicting success or failure of academic achievement of nursing in Korea so as to identify as early as possible those students who should receive special instruction and to improve screening procedures for admission of nursing. The main purpose of this study is to identify the correlation between the grade point averages of courses learned and their psychological test characteristics in a baccalaureate nursing program. All 240 students, except freshmen, enrolled in Nursing Department of Seoul National University in the spring semester, 1972, participated in this study. All of the subjects completed the psychometric tests such as interest test, personality test and test of self-concept. Total grade point averages, grade point averages of general education subjects, of supporting science courses and of professional education subjects were used as performance criteria of the students. Through the calculation of product-moment correlation coefficients between the test scores and four grade point averages of each class and of total subjects, the following findings and recommendations were obtained. 1. There was so much variation in characteristics of interest test correlated with academic achievement of nursing students in each class. 2. Since the school objectives, curriculum and teaching strategies may affect predictive efficiency of characteristics of students'interest test, interest test must-be utilized in a homogeneous group in order to predict school achievement. 3. Characteristics of interest test positively correlated at significant level with total grade point averages of all subjects were scientific interest-biological, scientific interest-physical, and humanitarian interest. Scientific interest-physics: was the only characteristic positively correlated at significant level with total grade point averages and grade point averages of professional courses. 4. There were various patterns in characteristics of personality test correlated with school achievement of nursing students by class pattern and personality maturation as they progress toward higher classes. 5. A characteristic of personality test, responsibility, is in high positive correlation with academic achievement in the upper division of classes. 6. Responsibility was the sole personality factor positively correlated at significant level with total grade point averages and grade point averages of nursing courses in the total number of students. 7. There were very different correlation coefficients between characteristics of self-concept test and academic achievement according to the type of each class and type of courses they learned. 8. Characteristics of self-concept test positively correlated at significant level with total grade point averages and grade point averages of nursing courses of all students were physical self and row variability. Those who have positive concept on their own physical status and who are deficient in self-concept were higher in total grade point averages and grade point averages of professional courses than other students. 9. Scores of professional courses offered in freshmen and sophomore classes were in positive correlation with limited number of characteristics of psychological tests. In pursuit of a tool predicting successful academic achievement of nursing students, their G.P.A. during the junior and senior year of nursing will serve as the more reasonable criteria. 10. Junior students of this school were in higher positive correlation with many psychological factors than other classes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.493-498
• /
• 2016

본 연구에서는 영하 $163^{\circ}C$의 극저온 환경에서 저장되는 액화천연가스 운반선 방열시스템에 적용되는 폴리우레탄 폼 단열재의 기계적 강도를 향상시키기 위한 연구의 일환으로 폴리우레탄 폼 합성 시 산화그래핀을 첨가한 산화그래핀-폴리우레탄폼을 개발하였다. 우선 Hummers 방법을 이용하여 산화그래핀을 합성하였으며, 폴리올과 이소시아네이트의 중합반응 시 산화그래핀의 중량비를 다르게 첨가하여 산화그래핀-폴리우레탄 폼 벌크를 제작하였다. 미세구조 분석을 통해 산화그래핀의 양에 의존한 산화그래핀-폴리우레탄 폼의 셀 안정성에 대해 분석 하였으며, 이와 동시에 산화그래핀이 폴리우레탄 폼 셀에 미치는 영향에 대해 분석하고자 하였다. 또한, 기계적 강도를 계측하기 위해 극저온용 챔버를 탑재한 만능재료시험기의 온도를 제어하여 상온 및 영하 $163^{\circ}C$의 극저온 환경에서 압축시험을 수행하여 기계적 거동 및 파손 특성에 대해 규명하였다. 시험 결과 산화그래핀의 양이 증가 할수록 기계적 강도는 향상되지만, 일정량 이상이 되면 셀형성을 방해하여 셀 구조의 안정성이 저하되고 기계적 강도 또한 저하되는 현상을 관찰하였다.