• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.186-188
• /
• 2002

An improved analytical model has been developed to calculate an accurate Bragg curve of proton beam with an arbitrary energy. The model takes the transport of the secondary protons produced by the nuclear inelastic reactions into account. By the model, measured Bragg curves of proton beams with ten energies between 250 and 70 MeV are reproduced well. It will serve to obtain fundamental data for treatment planning and for energy scanning.

• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.433-443
• /
• 2006

In [1], they build two populations' cellular automata model with predation based on the Penna model. In this paper, uncertain aspects and problems of imprecise and vague data are considered in this model. A fuzzy cellular automata model containing movable wolves and sheep has been built. The results show that the fuzzy cellular automata can simulate the classical CA model and can deal with imprecise and vague data.

• Journal of Magnetics
• /
• 제6권1호
• /
• pp.36-41
• /
• 2001

A micromagnetic model and a single-domain model simulation programs were used to analyze the sensitivity of a $20\mu m\times 60\mu m \times 1000{\AA}$ permalloy strip as a magnetoresistance sensor with bias fields of various directions and magnitudes. The micromagnetic model agrees with the measured sensitivity data better than the single-domain model. The data show the highest peak sensitivity with the bias field at 90$^{\circ}$to the current. The peak sensitivity decreases and the peak broadens as the bias angle decreases. The simulation using the micromagnetic model shows that a bias angle smaller than 90$^{\circ}$eads to magnetization patterns which are free from closure domains or vertices over a wider range of bias fields.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4134-4145
• /
• 2022

The collimator is one of the high-heat-flux components used to avoid a series of vacuum and thermal problems. In this paper, the heat load distribution throughout the collimator is first calculated through experimental data, and a transient thermodynamic simulation analysis of the original model is carried out. The error of the pipe outlet temperature between the simulated and experimental values is 1.632%, indicating that the simulation result is reliable. Second, the model is optimized to improve the heat transfer performance of the collimator, including the contact mode between the pipe and the flange, the pipe material and the addition of a twisted tape in the pipe. It is concluded that the convective heat transfer coefficient of the optimized model is increased by 15.381% and the maximum wall temperature is reduced by 16.415%; thus, the heat transfer capacity of the optimized model is effectively improved. Third, to adapt the long-pulse steady-state operation of the experimental advanced superconducting Tokamak (EAST) in the future, steady-state simulations of the original and optimized collimators are carried out. The results show that the maximum temperature of the optimized model is reduced by 37.864% compared with that of the original model. The optimized model was changed as little as possible to obtain a better heat exchange structure on the premise of ensuring the consumption of the same mass flow rate of water so that the collimator can adapt to operational environments with higher heat fluxes and long pulses in the future. These research methods also provide a reference for the future design of components under high-energy and long-pulse operational conditions.

• 한국과학교육학회지
• /
• 제11권2호
• /
• pp.67-77
• /
• 1991

In this paper, current research papers on Physics Problem Solving were analyzed according to the types of research purpose, method, subject and content of Physics, by using 3 Proceedings and 4 kinds of Journal, that is, the International Workshop(1983, Paris, France) and Conference (1983, Utrecht, The Netherlands) and Seminar(1987, Cornell University, U. S. A.) on Physics Education, and Journal of Research in Science Teaching (1984-1990) and Science Education (1986-1990). and Inter national Journal of Science Education(l987-1988) and Cognitive Science(1989-1990). There were 98 research papers on Problem Solving and among them 37 papers on Physics Problem Solving were selected for analyzing. The results of analysis are as follows; 1) The studies on Model of Novice Student were 22(59%), And those on Model of Desired Preformance, on Model of learning and on Model of Teaching were all much the same. 2) The theoretical studies were 10(27%), and the experimental ones 27(73%). Among the experimental studies, there were 16(59%) by using the written test, and 7(26%) by using the thinking aloud method. 3) The studies about university students as subjects were 20(54%). Probably, it seems the reason that most of researchers on Physics Problem Solving were professors of university or graduate students. 4) Among the various fields of Physics, the studies on Mechanics were 24(63%) and those on E1ectromagnetics 6(16%). or graduate students.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.894-900
• /
• 2021

This paper examines sorption of Pd(II) onto illite, MX-80 bentonite, and Queenston shale in Na-Ca-Cl solutions of varying ionic strength (IS) from 0.01 to 6.0 mol/L (M) and pH_c ranging from 3 to 9 under atmospheric conditions. A 2-site protolysis non-electrostatic surface complexation and cation exchange model was applied to the Pd sorption onto illite and MX-80 using PHREEQC, and the model results were compared to the experimental ones obtained in this work. Surface complexation and cation exchange constants were estimated for both illite and MX-80 through the optimization process to bring the predicted distribution coefficients from the model into alignment with the experimentally derived values. These optimized surface complexation constants were compared to existing linear free energy relationships (LFER).

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.716-730
• /
• 2017

In this paper, we propose a transliteration approach based on semantic information (i.e., language origin and gender) which are automatically learnt from the person name, aiming to transliterate the person name of Uyghur into Chinese. The proposed approach integrates semantic scores (i.e., performance on language origin and gender detection) with general transliteration model and generates the semantic knowledge-based model which can produce the best candidate transliteration results. In the experiment, we use the datasets which contain the person names of different language origins: Uyghur and Chinese. The results show that the proposed semantic transliteration model substantially outperforms the general transliteration model and greatly improves the mean reciprocal rank (MRR) performance on two datasets, as well as aids in developing more efficient transliteration for named entities.

• Journal of Astronomy and Space Sciences
• /
• 제33권1호
• /
• pp.63-67
• /
• 2016

The Korea Institute of Science and Technology Information (KISTI) has been studying the e-Science paradigm. With its successful application to particle physics, we consider the application of the paradigm to astroparticle physics. The Standard Model of particle physics is still not considered perfect even though the Higgs boson has recently been discovered. Astrophysical evidence shows that dark matter exists in the universe, hinting at new physics beyond the Standard Model. Therefore, there are efforts to search for dark matter candidates using direct detection, indirect detection, and collider detection. There are also efforts to build theoretical models for dark matter. Current astroparticle physics involves big investments in theories and computing along with experiments. The complexity of such an area of research is explained within the framework of the e-Science paradigm. The idea of the e-Science paradigm is to unify experiment, theory, and computing. The purpose is to study astroparticle physics anytime and anywhere. In this paper, an example of the application of the paradigm to astrophysics is presented.

• 폴리머
• /
• 제38권5호
• /
• pp.557-565
• /
• 2014

Sodium alginate and chitosan are added to a $CaCl_2$ solution to prepare calcium-alginate-chitosan and calciumalginate gels. After dehydration through stoving, two types of adsorbent particles are obtained. The adsorption process of the particles obtained for low concentrations of $Sr^{2+}$ satisfies a second-order kinetic equation and the Freundlich adsorption model. The thermodynamic behaviors of the particles indicate that adsorption occurs via a spontaneous physical process. XPS pattern analysis is used to demonstrate the adsorption of $Sr^{2+}$ by calcium alginate and chitosan. By building an interaction model of the molecules of chitosan and alginate with $Ca^{2+}$ and $Sr^{2+}$ to calculate energy parameters, Fukui index, Mulliken charge, and Mulliken population, adsorption of $Sr^{2+}$ on the molecular chains of chitosan as well as the boundary of calcium-alginate-chitosan is observed to show weak stability; by contrast, adsorption between molecular chains is high.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.123-131
• /
• 2016

Background: With the increase in the number of particle accelerator facilities under either operation or construction, the accurate calculation using Monte Carlo codes become more important in the shielding design and radiation safety evaluation of accelerator facilities. Materials and Methods: The calculations with different physics models were applied in both of cases: using only physics model and using the mix and match method of MCNPX code. The issued conditions were the interactions of 600 MeV proton and $290MeV{\cdot}n^{-1}$ oxygen with a carbon target. Both of cross-section libraries, JENDL High Energy File 2007 (JENDL/HE-2007) and LA150, were tested in this calculation. In the case of oxygen ion interactions, the calculation results using LAQGSM physics model and JENDL/HE-2007 library were compared with D. Satoh's experimental data. Other Monte Carlo calculations using PHITS and FLUKA codes were also carried out for further benchmarking study. Results and Discussion: It was clearly found that the physics models, especially intra-nuclear cascade model, gave a great effect to determine proton-induced secondary neutron spectrum in MCNPX code. The variety of physics models related to heavy ion interactions did not make big difference on the secondary particle productions. Conclusion: The variations of secondary neutron spectra and particle transports depending on various physics models in MCNPX code were studied and the result of this study can be used for the shielding design and radiation safety evaluation.