• 한국식품조리과학회지
• /
• 제29권6호
• /
• pp.785-794
• /
• 2013

To satisfy the consumer's interest with safety and high quality of staple foods, the physicochemical properties and cooking quality of organic rice using hairy vetch in Korea were compared. Two Korean varieties, Hopyeong and Ilmi, two Japanese varieties, Koshihikari and Hedomebore, and newly developed in Jeonnam, Mipum which cultivated in the same region and conditions were used. Physicochemical properties and cooking quality were investigated. All samples were japonica type short grains and their length/width ranged 1.74-1.84. The protein, ash, and crude lipid contents were significantly different with varieties and the protein content of Korean rice was lower than that of Japanese rice, especially, that of Hopyeong was the lowest. Amylose content and initial pasting temperature were lower in Hopyeong and Japanese rice, but peak viscosities showed reverse trends. Swelling power at $80^{\circ}C$ showed higher in Hopyeong and Koshihikari. Color values, L, a and b were significant difference with varieties and color differences of Hopyeong and Huitomebore were lower than those of others. Texture properties, hardness and adhesiveness of Hopyeong cooked rice showed the lowest values, but adhesiveness of Japanese cooked rice exhibited the highest value. On sensory evaluation of cooked rice, glossiness of Koshihikari, intactness of Koshihikari, Huitomebore, and Hopyeong, stickiness of Koshihikari and Hopyeong showed higher values (p<0.05). The overall quality score of organic cooked rices decreased as following order; Koshihikari> Hopyeong> Huitomebore> Mipum> Ilmi.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.126-138
• /
• 1995

To investigate the changes of physicochemical properties of leaf tobacco during storage, cured leaves (both flue-cured(KF109) and burley(Burley 21) : 4 grades of leaves) were stored under the natural warehouse condition(room temperature) and processed leaves(both Rue-cured(NC82) and burly(Burley 21) : 6 grades of leaves) were stored at storerooms in tobacco processing plants(flue-cured Cheongju plant ; 2nd, 4th and 5th floor, burley : Kwangju plant ; 2nd floor, Chonju plant : 3rd and 5th floor). Tobacco leaves were sampled and analyzed every 3 months. Total sugar content of flue-cured leaf decreased slightly and the redness degree of leaf increased after 15 months' storage under the natural warehouse conditions. The pH of cured leaves were lowered both flue-cured and burley, and the decreasing rate of pH was large in flue-cured(0.24) as compared with burley(0.14). There was no significant differences of physicochemical properties of processed leaf among storerooms during 15 months' storage. The decreasing rate of processed leaf pH was somewhat large in flue-cured(0.26) as compared with burly (0.20), and in thick leaves as compared with thin leaves. The redness degree of flue-cured leaf increased slightly, while the degree of lightness and yellowness lowered slightly during storage. The lightness degree of burley leaf lowered slightly, too. The ageing process of cured leaf was similar to that of processed leaf, it is considered that the passing days after curing will be more reasonable than the passing days after processing for the establishment of proper ageing period.

• Archives of Pharmacal Research
• /
• 제26권12호
• /
• pp.1002-1008
• /
• 2003

Ferulic acid (3-methoxy, 4-hydroxy cinnamic acid) is a flavoid component possessing antioxidant property. The compound is currently under development as a new drug candidate for the treatment of the dementia. The objective of this preformulation study was to determine the physicochemical properties of ferulic acid. The n-octanol to water partition coefficients of ferulic acid were 0.375 and 0.489 at the pHs of 3 and 10, respectively. Accelerated stability study for ferulic acid indicated that the t 90 value for the drug was estimated to be 459 days at $25^{\circ}C$. Ferulic acid was also found to be unstable under the relative humidity of more than 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of ferulic acid with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1: 1 binary mixtures of ferulic acid and typical pharmaceutical excipients (e.g., Aerosil, Avicel, CMC, Eudragit, lactose, PEG, PVP, starch and talc). Avicel, CMC, PVP and starch were found to be incompatible with ferulic acid, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of ferulic acid powder was in the size range of 10-190 $\mu$m with the mean particle size of 61 $\mu$m. The flowability of ferulic acid was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Two polymorphic forms were obtained by recrystallization from various solvents used in formulation. New polymorphic form of ferulic acid, Form II, was obtained by recrystallization from 1,4-dioxane. The equilibrium solubility for Form I was approximately twice of that for Form II. The dissolution rate of Form II was higher than that of Form I in the early phase (<6 min). Therefore, these physicochemical information has to be taken in the consideration for the formulation of ferulic acid.

• 한국식품조리과학회지
• /
• 제32권4호
• /
• pp.524-530
• /
• 2016

Purpose: The properties of starch and starch gel prepared from a newly inbred sweet potato, Daeyumi were compared to the properties of starch and starch gel prepared from Sinyulmi which is a well known mealy type sweet potato. Methods: The starch was isolated by using the alkaline steeping method. Physicochemical, pasting, and thermal properties, and crystallinity were measured. The texture properties of starch gel (10%, w/w) were examined. Results: The amylose contents of Daeyumi and Sinyulmi starches were 25.57% and 22.59%, respectively. The initial pasting temperature of Daeyumi starch was significantly higher than that of Sinyulmi starch (p<0.05), but other paste viscosities were not different. The peak and conclusion temperatures of Daeyumi starch were higher than those of Sinyulmi starch by differential scanning calorimetry. The shape of Daeyumi starch gel was more clear and rigid than the shape of Sinyulmi starch gel. The surface and the upper side of Daeyumi starch gel were smoother than the surface and the upper side of Sinyulmi starch gel. Hardness and gumminess were higher in Daeyumi starch gel than in Sinyulmi starch gel. The crystallinity types of Daeyumi and Sinyulmi starches were $C_b$ and A types, respectively, but starch gels showed an amorphous type. Conclusion: Therefore, it is suggested that Daeyumi starch would have better physicochemical properties and higher quality of starch gel than Sinyulmi starch.

• 한국축산식품학회지
• /
• 제32권2호
• /
• pp.174-183
• /
• 2012

The effects of dietary fiber extracted from pumpkin (pumpkin fiber) on physicochemical properties, textural properties, and sensory characteristics of chicken frankfurters were investigated. Chicken frankfurter was supplemented with pumpkin fiber at levels of 0, 1, 2, 3, and 4%. Adding different levels of pumpkin fiber affected the proximate composition of the chicken frankfurters (p<0.05), except for protein content. In addition of different levels of pumpkin fiber influenced the physicochemical and textural properties of the chicken frankfurters (p<0.05). The yellowness, viscosity, and hardness were higher in chicken frankfurters samples containing pumpkin fiber than those in the control (p<0.05). The results showed that chicken frankfurter samples with higher pumpkin fiber levels had lower lightness values (p<0.05), as well as less cooking loss, emulsion stability, and lower color scores (p<0.05) compared to those control without pumpkin fiber treatment. The chicken frankfurters with 2% and 3% pumpkin fiber had higher overall acceptability than that of the control (p<0.05). The results show that adding pumpkin fiber produced acceptable chicken frankfurters and improved their quality characteristics.

• 산업식품공학
• /
• 제13권1호
• /
• pp.24-31
• /
• 2009

The structural and physicochemical properties of dried aloe vera gel by DIS (dewatering impregnation soaking) process under optimum conditions were investigated. FT-IR spectra for dried samples of DIS aloes showed the typical patterns of standard aloe polysaccharide, and surface structures by SEM (scanning electron microscopy) were similar to a gel-like structure. In case of physicochemical properties of dried aloe samples by DIS process, solubilities and swelling powers of control (not osmotic treated aloe), DIS (S) and DIS (G), samples treated by osmotic solution of 60% sucrose/0.25% NaCl and 50% glucose/0.5% NaCl, were 48.3-57.3% and 8.3-11.7%, respectively, showing no significant differences among samples, but swelling power of DIS (PEG), sample treated by using 50% polyethylene glycol as an osmotic agent was about 5 times higher that of control. Also, water holding capacities of control, DIS (S) and DIS (G) were similar to each other, but that of DIS (PEG) was about 5 times higher that of control. Oil holding capacities of control and DIS aloes maintained the 50.9-86.4% levels of water holding capacities showing no significant differences among samples. Rehydration ratio of DIS (PEG) aloes were significantly dependent on the temperature of rehydrated solvent (water), and rehydration ratio of not-fileted aloe was about two folds higher than that of fileted aloe.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.148-155
• /
• 2018

To get a better understanding of the effect of physicochemical properties and microstructure on $SO_2$ absorption behavior of DESs with different molar ratios of EmimCl and EG (from 2:1 to 1:2), densities (${\rho}$), viscosities (${\eta}$), speeds of sound (u), refractive indices ($n_D$), and thermal decomposition temperatures ($T_d$) of EmimCl-EG DESs were measured and used to obtain the other derived properties, such as thermal expansion coefficient (${\alpha}_p$) and activation energy for viscous flow ($E_{\eta}$). Moreover, FT-IR spectra and in situ variable-temperature NMR spectroscopy were employed to study the microstructures of DESs. Based on physicochemical and spectroscopic properties, the influence of the concentrations of EmimCl on the interactions in DESs was explored to be associated with their $SO_2$ absorption behavior. The results show that the interactions between $Emim^+$ and $Cl^-$ of EmimCl is gradually weakening with increasing the concentration of EG in DESs by forming of hydrogen bond interaction of $O-H{\cdots}Cl^-$, resulting in a decrease of ${\rho}$, ${\eta}$, u, $n_D$, and $T_d$ of DESs, and hindering the charge-transfer interaction of $SO_2$ with $Cl^-$ and deceasing $SO_2$ capture capacity. Moreover, the $SO_2$ absorption capacity of DESs is proportional to their ${\rho}$ and $E_{\eta}$, respectively.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.140-148
• /
• 2024

This study aimed to enhance the physicochemical properties of sodium iodide-based root filling materials, particularly solubility. In earlier developmental stages, the iodoform-containing paste exhibited high antibacterial efficacy but failed to meet only the solubility requirement among the ISO 6876 criteria. Therefore, this study focused on enhancing the physicochemical properties of the paste under development, particularly centering on reducing its solubility. Four experimental groups were established, including three control group. The previously developed D30 paste was named the Oil 33 group, and the control group was named the Vitapex^® group. The Oil 50 group, in which the oil content was increased, and the Oil 45L group, in which lanolin was incorporated. The physical properties (solubility, pH, flowability, and film thickness) of the four pastes were evaluated according to the ISO 6876 standards. No significant differences were observed between the Oil 45L and Vitapex^® groups in any of the physical property evaluations. While the Oil 33 and Oil 50 groups met the ISO 6876 standards for flowability and film thickness, the Oil 45L group met all the physical properties. However, reducing the overall oil content may be necessary to enhance the antimicrobial properties. The result of the physicochemical experiments showed that the Oil 45L group with the newly formulated composition and incorporated lanolin exhibited low solubility meeting the ISO 6876 standard of ≤ 3%. We were able to develop a paste with more stable solubility than previous iodide-based root-filling materials. Therefore, the oil content must be further adjusted to improve its antimicrobial properties. If other physical properties also meet the ISO 6876 standards and demonstrate excellent results in cytotoxicity tests, this root filling material could potentially replace existing options.

• Journal of Applied Biological Chemistry
• /
• 제62권4호
• /
• pp.407-415
• /
• 2019

들깻잎에 살포된 triazole계 살균제 6종에 대하여 생물학적 반감기를 산출하고 분해 및 소실 속도를 확인하였으며, 통계분석으로 생물학적 반감기와 농약의 물리화학적 특성간의 상관관계를 확인하였다. 확립된 분석법으로 6종 농약의 회수율 시험 결과 84.8-104.9%로 잔류농약분석법 기준을 만족하였다. 들깻잎에 살포한 농약 6종의 생물학적 반감기는 first-order kinetics model으로 산출하였으며, 그 결과 6.4-15.1일로 나타났다. 산출된 생물학적 반감기와 6종의 농약의 물리화학적 특성을 주성분 분석으로 상관성을 확인하였을 때, pKa, Log P 및 생물학적 반감기가 PC1에 영향을 받아 상관성이 있는 것으로 나타났다. Spearman rank-order correlation으로 생물학적 반감기와 물리화학적 특성간의 상관계수를 산출하였을 때, 생물학적 반감기와 pKa는 R² = -0.928, p <0.01로 나타나, 생물학적 반감기는 pKa와 상관성이 있는 것으로 나타났다.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2005년도 세계의 친환경 시설원에 기술동향 및 춘계 국제학술대회 발표논문집
• /
• pp.218-222
• /
• 2005