• 한국조리학회지
• /
• 제23권3호
• /
• pp.29-37
• /
• 2017

This study investigated the physicochemical and sensory characteristics of white bean paste prepared with various amounts of aronia powder (as ratios of 0%, 2%, 4%, 6%, 8%, 10%). The result shows that the pH of white bean paste decreased significantly with the addition of aronia powder. From chromatography, the brightness, L-value was decreased by increasing the adding rate of aronia powder. The a-value of sample group adding 2% of aronia powder was the highest and that of sample group adding 8% was the lowest (p<0.01). Sample group adding 8% of aronia powder achieved the highest appraisal from many factors, such as springiness, cohesiveness, chewiness, brittleness, and adhesiveness. The total polyphenols and anthocyanin contents were proportionally increased with increasing the level of aronia powder added in white bean paste. The antioxidant activity measured by DPPH and NSA radical scavenging activities was significantly higher than control and increased proportionally to the aronia powder concentration. The result of sensory test shows that sample group adding 6% of aronia powder achieved the highest. Based on the above results, this study suggests that the addition of 6% aronia powder may be the best substitution ratio for white bean paste of the improvement of sensory preference and antioxidant.

• Preventive Nutrition and Food Science
• /
• 제13권4호
• /
• pp.354-361
• /
• 2008

A novel bacterium isolated from Cheonggukjang was identified as a glutamate-dependent Bacillus subtilis HA with 98.3% similarity to Bacillus subtilis Z99104. Optimization of poly-$\gamma$-glutamic acid ($\gamma$-PGA) production by modulating fermentation factors including carbon sources, nitrogen sources, inorganic salts and fermentation time was investigated. Optimum culture broth for $\gamma$-PGA production consisted of 3% glutamate, 3% glucose and various salts, resulting in the PGA production of 22.5 g/L by shaking culture for 72 hr at $37^{\circ}C$. Average molecular weight of $\gamma$-PGA was determined to be 1,220 kDa through MALLS analysis. The $\gamma$-PGA solution showed a typical pseudoplastic flow behavior, and a great decrease in consistency below pH 6.0 regardless of the same molecular weight of $\gamma$-PGA. The molecular weights of isolated $\gamma$-PGA were drastically decreased by heat treatment in various acidic conditions, resulting in different hydrolysis of $\gamma$-PGA. The consistency of $\gamma$-PGA solution was greatly decreased with increase heating time in acidic conditions.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.539-549
• /
• 1996

Large bowel cancer correlates tightly to dietary factors such as dietary fiber and fat. Dietary fiber prevents the large bowel cancer in different modes of action which depend upon physicochemical and fermentable properties. Water-soluble fiber is fermented easily by intestinal microbes producing short chain fatty acids ; in contrast, water-insoluble fiber occurs effectively more rapid transit time due to greater bulk of gut content, though it is unfermentable. Not only short chain fatty acid is utilized in the proximal and distal colon as primary energy source, but also it lowers pH in the colon to normalize cellular differentiation and helps to stimulate peri staltic movement by acting as an osmotic laxative. In particular, butyric acid may also regulate gene expression and cell growth, though it is an important respiratory fuel for the colonocyte. Since dietary fiber and non-digestible oligosaccharides are the major source of butyric acid, this provides a possible link between dietary fiber and oligosaccharide and prevention of large bowel cancer. But, as with many links between dietary fiber and large bowel cancer, a direct casual association has not been established. In addition, RDA of dietary fiber which is 20~25g/day for adult Japanese, appears to be reasonable for the defecation once daily and the prevention of large bowel cancer.

• Natural Product Sciences
• /
• 제21권3호
• /
• pp.196-204
• /
• 2015

Nineteen compounds, including one organic acid (1), one anthraquinone (2), one amide (3), and sixteen triterpenoid saponins (4 - 19) were isolated from the leaves of Acanthopanax henryi (Oliv.) Harms (Araliaceae). Their structures were determined on the basis of physicochemical properties and spectral analyses (HR-MS and NMR). Among them, compounds 2, 3, 7, 12 and 19 were new within Araliaceae. Compounds 4, 5, 9 - 11, 13, 14, 16 and 18 were reported for the first time from the Acanthopanax genus. Except for compounds 4 and 9, other compounds were isolated from A. henryi (Oliv.) Harms for the first time. The rare anthraquinone, compound 2, significantly decreased the production of NO and the levels of other inflammatory factors, such as TNF-α and IL-6, in lipopolysaccharide (LPS)-stimulated macrophages in a dose-dependent manner. This is the first time to report anti-inflammatory effect of this compound.

• Journal of Pharmaceutical Investigation
• /
• 제5권1호
• /
• pp.41-48
• /
• 1975

Extrusion-Spheronization Processing (ESP) was applied to preparate sustained release spherical particles as a form of matrix spherical particle (MSP). dl-methylephedrine HCI (ME) was the drug chosen and several dissolution retardants and binders were selected to estimate a relatively good formulation on this purpose. The effect of physicochemical nature, concentration, and solvents of these dissolution retardants and binders on regularity in shape of MSP and in vitro release rate was investigated. The effect of Particle size of matrix particles was also evaluated. It is, therefore, concluded that this ESP would be a relatively good preparation method of sustained release MSP of ME which has the sustained action of about 5 and 8 hours by formulating of ethylcellulose and ethylcellulose-paraffin as a dissolution retardant, respectively, and then ethylcellulose solution of 80% EtOH is recommended as a binder.

• 한국식품위생안전성학회지
• /
• 제7권4호
• /
• pp.165-172
• /
• 1992

Among the nutrients of biological importance, minerals are of particular interest in human nutrition because the range of adequate intake is so narrow. As the results of a series of interaction experiments between dietary fiber sources and minerals, there are many inconsistencies in the experimental data regarding the effect of dietary fibers on mineral bioavailability. the mechanism by which dietary fiber might influence mineral absorption is related to its physicochemical properties. These properties involve the ability of dietary fiber to (1) act as a weak cation exchanger, (2) decrease transit time, (3) dilute mineral concentration by increasing fecal bulk and (4) resist digestion in the large bowel. Regardless of the large number of human and animal studies available, a carful review of these publications dose not provide the answer as to whether the adverse effect of dietary fibers on mineral absorption is the fiber itself or some associated dietary factors( e.g. phytate, oxalate, ascorbate, citrate and protein, mineral-mineral interaction, etc) that are responsible for this action. As a result of the complexity of interaction that may take place between minerals. dietary fiber, and other component of food ; it becomes very difficult to blame fiber alone as a negative factor of mineral nutrition. We absolutely need more research with advanced tools rather than metabolic balance study.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.54-61
• /
• 2013

This paper reports mild steel(SPHC) and stainless steel(STS304) sheets commonly used for railroad cars or commercial vehicles such as in the automobile and shipbuilding industries. The sheets are used in these applications, which are mainly fabricated using the shielded metal arc welding(SMAW) of dissimilar materials. It also reports an interesting application of Laser Induced Breakdown Spectroscopy(LIBS) in order to determine the elemental composition diffusion of SPHC and STS304. Arc blow produced by magnetic force during the electric arc welding prevents the formation from a sound weldment. In particular, the mechanical properties of the joint are influenced by not only by geometrical and mechanical factors but also the welding conditions for the arc welded joint. Therefore, the mechanical properties and performance are evaluated by performing a physicochemical component analysis. And they increase in accordance with content of elements and microstructure in mild steel. As results, appropriate range for magnetic fields could be achieved. Therefore, the effect of magnetic force in a butt weld of mild steel plates was investigated by comparing to the measured data.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.319-326
• /
• 2007

Coastal marine ecosystems continue to suffer unrelenting pressures from human population growth, increased development, and climate change. Moreover, these systems' capacity for self-repair is declining with such increases in anthropogenic production of various pollutants. What is the present health status or condition of the coastal ecosystem? If our coastal areas are unhealthy, which conditions are considered serious? To answer such questions, the United States, Canada, and Australia are currently assessing coastal ecosystem health using systematic monitoring programs as well as identifying and implementing management plans to improve the health of degraded coastal ecosystems. To evaluate marine environments, Korea is currently using a limited number of factors to estimate water quality. In fact, we are ill-prepared for assessing coastal ecosystem health because no biologically specific criteria are in place to measure the responses to various pollutants. We should select ecosystem-specific indicators from physicochemical stressors and evaluate the subsequent biological responses within each ecosystem. Furthermore, a set of practical indicators should be generated by considering the characteristics and uses of a local coastal area and the key issues at hand. The values of indicators should be presented as indices that allow understanding by the general public as well as by practitioners, policy makers, environmental managers and other stakeholders.

• 약학회지
• /
• 제37권1호
• /
• pp.66-75
• /
• 1993

Dental abrasive, dicalcium phosphate dehydrate (DCPD) was prepared and the several important factors affecting on the quality of toothpaste were investigated by means of set test, glycerine absorption, Coulter counter test, color difference, BET adsorption, mercury porosimetery, and rheogram comparing with two foreign DCPDs, MFO4 and Dentphos K. Sample DCPD was prepared by reaction between 85% H$_{3}$PO$_{4}$ and 15% milk of lime at $39^{\circ}C$ (pH6.5), and stabilized with TSPP and TMP. The physicochemical properties of Sample DCPD were obtained as follows: whiteness (98.99), average particle size (15.5 $\mu\textrm{m}$), pH (7.9), remainder particle weight (0.49w/w%), glycerine absorption value (64 ml), and set test (passed). N$_{2}$ adsorption curves (BET) of three kinds of DCPD showed non-porous type III isotherm. BET adsorption parameters of sample DCPD showed that surface area was 24.9 m$^{2}$/g, total pore volume 0.09 cm$^{3}$/g and average pore radius 72.0 $\AA$. The rheogram of the toothpaste containing each DCPD showed bulged plastic flow with yield vlaue and thixotropic behavior. These results meet standard requirements as abrasive standard, and suggested that synthesized sample DCPD could be used a dental abrasive such as a high quality grade in practice as foreign DCPDs.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.15-23
• /
• 1996

During the last two decades, many industrial complexes for heavy and chemical industries have been established along the Korean coastline, thereby increasing the pollution materials burden on the coastal environment of seawater. Masan Bay is one of the most polluted coastal areas in Korea and the main soures of pollutants are domestic and industrial wastewater from Masan, Changwon. This study was aimed to evaluate relationships among the physicochemical parameters in the bottom water of Masan bay and to examine environmental factors affecting to pollutions of seawater by factor analysis. 'rife factor loading, 1 is showed higher increasing inclination after 1989 year in station 1. The variance of pollutant materials is showed 43.7% in which the coastal inflow water is indicated external loadings(factor 1 : NO3--N, TN, factor 4 : SiO2-Si) corresponded to domestic sewage, industrial wastewater, and earth-sands in the bottom water of Masan bay And the internal loadings(factor 2 : SS, salinity, factor 3 . W.T., DO) are explained 33.8%'corresponded the phenomena of sedimentary layer and oxygen concentration. Therefore, The external loadings are explained by the higher factor pollutantal variance in Masan bay.