• 한국수산과학회지
• /
• 제42권6호
• /
• pp.574-579
• /
• 2009

Acid- and pepsin-solubilized collagens were extracted from the skin of shark (Isurus oxyrinchus) and their physicochemical properties were characterized by amino acid analysis, SDS-PAGE, the composition of collagen types, solubility and denaturation temperature. Acid - and pepsin-solubilized collagens from shark skin had an imino acid of 188.8 and 186.2 residues/1,000 amino acids, respectively. SDS-PAGE showed two different${\alpha}$ chains ($\alpha1$ and $\alpha2$) and $\beta$-component. The component ratio of type I and V was 10:1, and the type III was not found. Solubility of acid-soluble collagen was low in the range of pH 6.0 to pH 11.0. On the other hand, pepsin-solubilized collagen showed a low solubility in the range of pH 7.0-9.0. Temperature for denaturation of acid- and pepsin-solubilized collagens were $25^{\circ}C$ and $27^{\circ}C$, respectively.

• 한국작물학회지
• /
• 제41권spc1호
• /
• pp.10-24
• /
• 1996

[ ($1{\to}3$) ], ($1{\to}4$)-${\beta}$-D-glucans(${\beta}-glucans$) are a major component of the cell walls of grasses as a component of the cereal endosperm and aleurone cell walls. Although ${\beta}-glucans$ exist in all cereals, their concentration is highest in oats and barley. Genetic and environmental differences are found in total ${\beta}-glucan$ content. Both oats and barley ${\beta}-glucans$ have cholesterol-lowering effects. This suggests possible use as food additives. Structural characterization of ${\beta}-glucan$ is important because structure can influence physical and physiological properties. In this review, ${\beta}-glucans$ of barley and oats are discussed in details including structure, chemical and physical properties, and nutritional implications. The use of barley and oat products as well as ${\beta}-glucan$ as a food additive continues to increase. This can provide an additional market for barley and oats, thus increasing the value of the crops.

• 한국식품영양학회지
• /
• 제9권3호
• /
• pp.242-246
• /
• 1996

High viscous hyaluronic acid complex from Klebsiella sp. L-10 NTG 50 mutant was purified by two-phase extraction system using PEG-K2HP04 and its physicochemical properties were Investigated. Viscosity of the purified hyaluronic acid complex was decreased as temperature and salts concentration were Increased and also showed low viscosity at below pH 5.0 and above pH 11.0. Hardness, cohesiveness and adhesiveness of the purified hyaluronic acid complex were 1, 20kg, 1.91 and 0.62, respectively. Water holding capacity was 6.9ml per gram of the purified hyaluronic acid complex powder.

• Food Science and Biotechnology
• /
• 제16권3호
• /
• pp.374-380
• /
• 2007

Chemical and sensory profiles of 5 Korean commercial rice wines (yakju) were developed using descriptive, physicochemical, and volatile analyses. Color, 6 aroma, and 5 taste attributes of these rice wines were evaluated by a panel of 13 judges. Sample wines were analyzed for titratable acidity, ethanol content, pH, Hunter colorimeter value, organic acids, and free sugars. Volatile analysis of the samples revealed the presence of 2 acids, 7 alcohols, 19 esters, and 5 miscellaneous compounds. Based on principal component analysis of the descriptive data, rice wines were primarily separated along the first principal component, which accounted for 57% of the total variance between the rice wines with high intensities of 'color' and 'sweet aroma' versus 'ginseng' aroma.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.285-285
• /
• 1996

Cyclosporin A (CyA) is widely used in the inhibition of graft rejection in organ transplantation. However, the bioavailability of CyA after oral administration is very low due to its poor solubility and dispersability hi water. To improve the solubility of CyA, microemulsion systems were developed and its physicochemical characteristics were evaluated by phase studies, solubility and dispersability tests. Phase studies on the systems composed of ethyl oleate (EO), PPG-20 methyl glucose ether (GP-20), poloxamer 123 (PL) and water U) were carried out to make stable w/o emulsions. Besides, based on CyA solubility test in various compositions of surfactant systems, a reasonable surfactant composition (GP-20/PL=4/1) was selected to enhance its solubility.

• Parasites, Hosts and Diseases
• /
• 제55권4호
• /
• pp.409-416
• /
• 2017

The high prevalence of pediculosis capitis, commonly known as head lice (Pediculus humanus capitis) infestation, has led to the preparation of a community-based pediculicidal ointment, which is made of common household items and the extract of Tinospora crispa stem. The present study aimed to evaluate the safety, efficacy, and physicochemical characteristics of the T. crispa pediculicidal ointment. The physicochemical properties of the ointment were characterized, and safety was determined using acute dermal irritation test (OECD 404), while the efficacy was assessed using an in vitro pediculicidal assay. Furthermore, the chemical compounds present in T. crispa were identified using liquid-liquid extraction followed by ultra-performance liquid chromatography quadruple time-of-flight mass spectrometric (UPLC-qTOF/MS) analysis. The community-based ointment formulation was light yellow in color, homogeneous, smooth, with distinct aromatic odor and pH of $6.92{\pm}0.09$. It has spreadability value of $15.04{\pm}0.98g{\cdot}cm/sec$ and has thixotropic behavior. It was also found to be non-irritant, with a primary irritation index value of 0.15. Moreover, it was comparable to the pediculicidal activity of the positive control $Kwell^{(R)}$, a commercially available 1% permethrin shampoo (P>0.05), and was significantly different to the activity of the negative control ointment, a mixture of palm oil and candle wax (P<0.05). These findings suggested that the community-based T. crispa pediculicidal ointment is safe and effective, having acceptable physicochemical characteristics. Its activity can be attributed to the presence of compounds moupinamide and physalin I.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.294-300
• /
• 2015

Objectives: The aim of this study is to identify physicochemical properties such as chemical composition, size, shape and crystal structure of powder byproducts generated from a metallization process and its 1st scrubber in the semiconductor industry. Methods: Powder samples were collected from inner chambers during maintenance of the W-plug process equipment (using tungsten hexafluoride as a precursor material) and its 1st scrubber. The chemical composition, size and shape of the powder particles were determined by field emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) equipped with an energy dispersive spectroscope (EDS). The crystal structure of the powders was analyzed by X-ray diffraction (XRD). Results: From the SEM-EDS and TEM-EDS analyses, O and W were mainly detected, which indicates the powder byproducts are tungsten trioxide ($WO_3$), whereas Al, F and Ti were detected as low peaks. The powder particles were spherical and nearly spherical, and the particle size collected from the process equipment and its 1st scrubber showed 10-20 nm (agglomerates: 55-90 nm) and 16-20 nm (agglomerates: 80-120 nm) as primary particles, respectively. The XRD patterns of the yellow powder byproducts exhibit five peaks at $23.8^{\circ}$ $33.9^{\circ}$ $41.74^{\circ}$ $48.86^{\circ}$ and $54.78^{\circ}$ which correspond to the (200), (220), (222), (400), and (420) planes of cubic $WO_3$. Conclusions: We elucidated the physicochemical characteristics of the powder byproducts collected from W-plug process equipment and its 1st scrubber. This study should provide useful information for the development of alternative strategies to improve the working environment and workers' health.

• Archives of Pharmacal Research
• /
• 제26권12호
• /
• pp.1002-1008
• /
• 2003

Ferulic acid (3-methoxy, 4-hydroxy cinnamic acid) is a flavoid component possessing antioxidant property. The compound is currently under development as a new drug candidate for the treatment of the dementia. The objective of this preformulation study was to determine the physicochemical properties of ferulic acid. The n-octanol to water partition coefficients of ferulic acid were 0.375 and 0.489 at the pHs of 3 and 10, respectively. Accelerated stability study for ferulic acid indicated that the t 90 value for the drug was estimated to be 459 days at $25^{\circ}C$. Ferulic acid was also found to be unstable under the relative humidity of more than 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of ferulic acid with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1: 1 binary mixtures of ferulic acid and typical pharmaceutical excipients (e.g., Aerosil, Avicel, CMC, Eudragit, lactose, PEG, PVP, starch and talc). Avicel, CMC, PVP and starch were found to be incompatible with ferulic acid, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of ferulic acid powder was in the size range of 10-190 $\mu$m with the mean particle size of 61 $\mu$m. The flowability of ferulic acid was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Two polymorphic forms were obtained by recrystallization from various solvents used in formulation. New polymorphic form of ferulic acid, Form II, was obtained by recrystallization from 1,4-dioxane. The equilibrium solubility for Form I was approximately twice of that for Form II. The dissolution rate of Form II was higher than that of Form I in the early phase (<6 min). Therefore, these physicochemical information has to be taken in the consideration for the formulation of ferulic acid.

• 한국축산식품학회지
• /
• 제36권2호
• /
• pp.267-274
• /
• 2016

The purposes of this study were to investigate the impacts of concentration levels of whey protein isolate (WPI) and inulin on the formation and physicochemical properties of WPI/inulin nano complexes and to evaluate their potential prebiotic effects. WPI/inulin nano complexes were produced using the internal gelation method. Transmission electron microscopy (TEM) and particle size analyzer were used to assess the morphological and physicochemical characterizations of nano complexes, respectively. The encapsulation efficiency of resveratrol in nano complexes was studied using HPLC while the potential prebiotic effects were investigated by measuring the viability of probiotics. In TEM micrographs, the globular forms of nano complexes in the range of 10 and 100 nm were successfully manufactured. An increase in WPI concentration level from 1 to 3% (w/v) resulted in a significant (p<0.05) decrease in the size of nano complexs while inulin concentration level did not affect the size of nano complexes. The polydispersity index of nano complexes was below 0.3 in all cases while the zeta-potential values in the range of -2 and -12 mV were observed. The encapsulation efficiency of resveratrol was significantly (p<0.05) increased as WPI and inulin concentration levels were increased from 1 to 3% (w/v). During incubation at 37℃ for 24 h, WPI/inulin nano complexes exhibited similar viability of probiotics with free inulin and had significantly (p<0.05) higher viability than negative control. In conclusions, WPI and inulin concentration levels were key factors affecting the physicochemical properties of WPI/inulin nano complexes and had potential prebiotic effect.

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2011년도 춘계학술발표회
• /
• pp.252-253
• /
• 2011