• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.1-13
• /
• 2020

As research on secondary batteries becomes important, interest in analytical methods to examine the condition of secondary batteries is also increasing. Among these methods, the electrochemical impedance spectroscopy (EIS) method is one of the most attractive diagnostic techniques due to its convenience, quickness, accuracy, and low cost. However, since the obtained spectra are complicated signals representing several impedance elements, it is necessary to understand the whole electrochemical environment for a meaningful analysis. Based on the understanding of the whole system, the circuit elements constituting the cell can be obtained through construction of a physically sound circuit model. Therefore, this mini-review will explain how to construct a physically sound circuit model according to the characteristics of the battery cell system and then introduce the relationship between the obtained resistances of the bulk (R_b), charge transfer reaction (R_ct), interface layer (R_SEI), diffusion process (W) and battery characteristics, such as the state of charge (SOC), temperature, and state of health (SOH).

• 한국재료학회지
• /
• 제20권9호
• /
• pp.478-482
• /
• 2010

A series of molecular dynamic (MD), finite element (FE) and ab initio simulations are carried out to establish suitable modeling schemes for the continuum-based analysis of aluminum matrix nanocomposites reinforced with carbon nanotubes (CNTs). From a comparison of the MD with FE models and inferences based on bond structures and electron distributions, we propose that the effective thickness of a CNT wall for its continuum representation should be related to the graphitic inter-planar spacing of 3.4${\AA}$. We also show that shell element representation of a CNT structure in the FE models properly simulated the carbon-carbon covalent bonding and long-range interactions in terms of the load-displacement behaviors. Estimation of the effective interfacial elastic properties by ab initio simulations showed that the in-plane interfacial bond strength is negligibly weaker than the normal counterpart due to the nature of the weak secondary bonding at the CNT-Al interface. Therefore, we suggest that a third-phase solid element representation of the CNT-Al interface in nanocomposites is not physically meaningful and that spring or bar element representation of the weak interfacial bonding would be more appropriate as in the cases of polymer matrix counterparts. The possibility of treating the interface as a simply contacted phase boundary is also discussed.

• 한국수자원학회논문집
• /
• 제56권10호
• /
• pp.641-653
• /
• 2023

기후변화와 도시화의 영향으로 인해 자연재해의 발생빈도와 규모가 증가하고 있다. 특히 도시 침수는 발생 시간이 짧고 막대한 인명 및 경제적 손실을 초래할 수 있기 때문에 신속하고 정확도 높은 예측 정보 생산이 중요하다. 하지만, 기존 물리과정 및 인공지능 기반 기법은 고해상도 침수 해석을 위해 많은 전산 자원이나 데이터가 요구되는 한계가 있다. 본 연구에서는 딥러닝 기반 초해상화(Super-Resolution) 기법을 통한 고해상도 도시 침수 해석 방법을 제안하고 적용성을 평가한다. 제안된 방법은 고해상도 물리 모형의 결과로 훈련된 초해상화 딥러닝 모형을 이용하여 저해상도 침수 해석 이미지를 고해상도로 변환한다. 미국 포틀랜드 도심지의 두 가지 침수 사례에 대해 적용, 4 m 공간해상도 물리 모의 결과를 1 m 급 고해상도 침수 해석 정보로 초해상화 하였으며, 초해상화 이미지와 고해상도 원본 간 높은 구조적 유사성이 확인되었다. 성능 지표로 평가한 결과, 전체 검증 대상 이미지에 대한 평균 PSNR 22.77 dB, SSIM 0.77로 우수하여, 초해상화 기법의 도시 침수 해석 적용성이 검증되었다. 제안된 방법은 적은 양의 침수 시나리오만으로도 효율적인 딥러닝 모형 훈련이 가능하고, 물리 모형의 정보를 최대한 활용할 수 있기 때문에, 고해상도 도시 침수 정보 생산에 효과적으로 사용될 수 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.37-44
• /
• 2008

Nowadays, the increasing global competition forces manufacturer to reduce the cost and time for implementation of manufacturing system. The AR(augmented reality) technology as a new human-machine interface introduces a noteworthy perspective for a new manufacturing system design. Using AR technology, a physically existing production environment can be superimposed with virtual planning objects. Therefore, the planning tasks can be validated without modeling the surrounding environment of the production domain during short process planning time. In this paper, we introduce the construction of AR browser and determine the optimal environment parameters for field application of AR system through lots of tests. And, many methods such as multi-marker coordinate system, division of virtual objects and so on, are proposed in order to solve the problems suggested from initial field test. Based on these tests and results, the test-bed of C/Pad assembly system is configured and robot program for C/Pad assembly is generated based on AR system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.911-914
• /
• 2005

Soft tissue characterization and modeling based on living tissues has been investigated in order to provide a more realistic behavior in a virtual reality based surgical simulation. In this paper, we characterize the nonlinear viscoelastic properties of intra-abdominal organs using the data from in vivo animal experiments and inverse FE parameter estimation algorithm. In the assumptions of quasi-linear-viscoelastic theory, we estimated the nonlinear material parameters to provide a physically based simulation of tissue deformations. To calibrate the parameters to the experimental results, we developed a three dimensional FE model to simulate the forces at the indenter and an optimization program that updates new parameters and runs the simulation iteratively. The comparison between simulation and experimental behavior of pig intra abdominal soft tissue are presented to provide a validness of the tissue model using our approach.

• 한국컴퓨터그래픽스학회논문지
• /
• 제15권1호
• /
• pp.25-34
• /
• 2009

사운드는 가상현실 및 컴퓨터 애니메이션에서 사용자의 현실감 및 집중도를 높이기 위한 중요한 요소이다. 최근에 컴퓨터 그래픽스 분야에서도 연구자들이 사운드 관련 연구들에 관심을 가지고 여러 컴퓨터 그래픽스 학술지와 학회에 주목할만한 연구결과들이 발표되고 있다. 본 논문에서는 컴퓨터 그래픽스 분야에서 소개된 논문들을 중심으로, 컴퓨터 그래픽스에서 관심을 가지는 사운드 연구의 주제에 대하여 알아보고 중요성을 가지는 논문들을 소개한다. 특히 본 논문에서는 다음 두 가지 분야의 논문들을 소개한다. 첫째, 사운드를 물리적으로 합성함으로써 그래픽스의 물리 법칙에 동기화되는 사운드를 생성하는 것이다. 둘째, 음원에서 나오는 사운드가 사람에게 들리는 음향적 환경을 모델링하는 것이다. 사운드에 대한 연구에서 주된 관심은 이러한 음향학적인 물리법칙을 더욱 효율적으로 모델링하여 적은 자원으로도 실제적인 사운드 효과를 발생할 수 있는지에 대한 것이다. 이러한 관점을 중점으로 다양한 사운드 관련 논문들을 살펴보고 컴퓨터 그래픽스와의 관계를 살펴보도록 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.385-392
• /
• 2018

This paper presents 2D numerical modeling to calculate ship-ice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a ship-ice contact detection technique and fluid-structural interaction of ice plate bending behavior. The ship-ice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the ship-ice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.55-62
• /
• 2015

Floating structure such as tension leg platform, semi-submersible and spar are widely used in field of oil exploration and renewable energy system. All of these structures have the base cylinder support structure which have effective rule in overall dynamic of response. So the accurate and reliable modeling is needed for optimum design and understanding the physical background of these systems. The aim of this article is an analytical discussion on stochastic modeling of floating cylinder based support structure but an applicable one. Due to this a mathematical mass-damper-spring system of a floating cylinder of HAWAII WTG offshore wind as an applicable and innovative system is adopted to model a coupled degrees using random vibration in analytical way. A fully develop spectrum is adopted to solve the stochastic spectrum analytically by a proper approximation. Some acceptable assumption is adopted. The simplified but analytical and innovative hydrodynamic analysis of this study not only will help researcher to concentrate more physically on hydrodynamic analysis of floating structures but also can be useful for any quick, simplified and closed form analysis of a complicated problem in offshore engineering.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.19-33
• /
• 1992

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorolog ital processecs . In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification Process through observation is emphasized.

• International Journal of Advanced Culture Technology
• /
• 제11권4호
• /
• pp.333-339
• /
• 2023

In three-dimensional(3D) modeling, texturing plays a crucial role as a visual element, imparting detail and realism to models. In contrast to traditional texturing methods, the current trend involves utilizing AI tools such as Leonardo.Ai and Meshy to create textures for 3D models in a more efficient and precise manner. This paper focuses on 3D texturing, conducting a comprehensive comparative study of AI tools, specifically Leonardo.Ai and Meshy. By delving into the performance, functional differences, and respective application scopes of these two tools in the generation of 3D textures, we highlight potential applications and development trends within the realm of 3D texturing. The efficient use of AI tools in texture creation also has the potential to drive innovation and enhancement in the field of 3D modeling. In conclusion, this research aims to provide a comprehensive perspective for researchers, practitioners, and enthusiasts in related fields, fostering further innovation and development in this domain.