• YAKHAK HOEJI
• /
• v.29 no.3
• /
• pp.124-129
• /
• 1985

A dissolution characteristics of phenylbutazone deposited on Avicel and dibasic calcium phosphate by solvent deposition method were studied. The solvent deposition was confirmed by scanning electron microscopy. Avicel was superior to dibasic calcium phosphate as excipient in dissolution rate. Total amount of phenylbutazone dissolved from Avicel deposition system at 30minutes were enhanced 1.2-1.6 times compared with physical mixtures of them. The dissolution rate of 10% solvent deposition system was highest and that of 75% solvent deposition system was lowest in Avicel system and dibasic calcium phosphate system. Dissolution profile of commercial products was dependent on manufacturing conditions and dissolution rate of 10% Avicel system was greater than that of commercial products.

• Carbon letters
• /
• v.26
• /
• pp.25-30
• /
• 2018

The dielectric medium used in electrophoretic displays (EPDs) is required to be an environmentally friendly solvent with high density, low viscosity, and a large electric constant. Hydrofluoroether, a highly fluorinated solvent with eco-friendly characteristics, is regarded as a viable alternative medium for EPDs, owing to the similarity of its physical properties to those of the conventional EPD medium. Surface modification of particles is required, however, in order for it to disperse in the charged solvent. Also, positive/negative charges should be present on the particle surface to enable electrophoretic behavior. In this study, carbon black particles wrapped with positively charged nitrogen (N-CBs) were fabricated by a simple hydrothermal process using a poly(diallyldimethylammonium chloride) solution as a black coloring agent for the EPD. The dispersion behavior of N-CBs was investigated in various solvents.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.38-45
• /
• 2008

In this work, we investigated the variation of physical and chemical characteristics of solvent-insolubles and solvent-solubles in Canada's Athabasca oil sands by solvent-insolubles experiments. N-Heptane, n-Hexane, and n-Pentane were tested for solvents and asphaltenes were separated from maltenes by using a modified ASTM D 3279 method. Elemental analysis, boiling point distribution (SIMDIS), molecular weight distribution, heavy metal contents, API gravity, viscosity and SARA fractions were measured for thorough samples. The asphaltenes-removed maltenes contained less sulfur and heavy metal amounts and had lower molecular weight than the original bitumen. N-Pentane solvent could lower sulfur and heavy metal amounts, molecular weight, and viscosity of maltenes compared to the other solvents. Eventually, we confirmed that the obtained experimental data could be used as basic informations of bitumen upgrading processes for the production of SCO (synthetic crude oil).

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.391-407
• /
• 2023

This article provides a survey of wet (aqueous) methods for recovery, separation, and purification of uranium from fission products in carbonate solutions during the reprocessing of spent nuclear fuel and methods for removal of radionuclides from alkaline radioactive waste. The main methods such as selective direct precipitation, ion exchange, and solvent extraction are considered. These methods were compared and evaluated for reprocessing of spent nuclear fuel in carbonate media according to novel alternative non-acidic methods and for treatment processes of alkaline radioactive waste.

• Archives of Pharmacal Research
• /
• v.28 no.4
• /
• pp.493-501
• /
• 2005

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and coating. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about $50\%$ drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.542-554
• /
• 2023

This study is a continuation of our previous work, which focused on the resistance of jabon wood to termites after impregnation with wood vinegar (WV) and animal-based adhesive (kak). This paper presents the physicomechanical properties of fast-growing jabon wood impregnated with kak at two concentrations (8% and 10%) in wood vinegar or water as a solvent with and without 4% borax. The physical properties of the impregnation solution, that is, viscosity, density, pH, and solid content, were evaluated according to SNI 06-4567-1998. Some physical parameters, such as weight percent gain (WPG), density, water uptake, anti-swelling efficiency (ASE), crystallinity, and mechanical properties, i.e., modulus of elasticity (MOE), modulus of rupture (MOR), and compression strength parallel to the grain (CS), of the impregnated wood were determined. Based on these results, wood impregnated using a mixture of kak in WV presented better physical (increased WPG, density, dimensional stability, and crystallinity) and mechanical (increased MOE/MOR and compression strength) properties than wood impregnated with a water solvent or untreated wood. The wood impregnated using WV and water solvent improved the physical and mechanical properties. The density of the wood increased by 44%-58% and 32%-47%, ASE radial-tangential increased by 38%-45%; 15%-28% after 24 h of water immersion, crystallinity increased by 59%-74%; 36%, MOE increased by 46%-57%; 28%-31%, MOR increased by 29%-34%; 14%-27%, and compression strength increased by 40%-76%; 38%-72% values to untreated wood.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.73-78
• /
• 1993

• Membrane Journal
• /
• v.31 no.4
• /
• pp.282-292
• /
• 2021

In this work, we tested commercial organic solvent nanofiltration (OSN) membranes using both in-house dead-end and crossflow systems. Four different crosslinked polyimide Duramem (DM) OSN membranes with various MWCO (molecular weight cut off) values were tested in organic solvents such as ethanol, N,N-dimethylformamide, acetone and acetonitrile. The membranes exhibited more reliable and reproducible performance in the crossflow system, and the performance changed significantly depending in the physical properties of the testing solvent. This is due to the initial stabilization period via pressure-induced compaction phenomenon, which can be vastly different between membrane samples. Hence, to obtain reliable and reproducible results, crossflow system is the preferred choice.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.203-213
• /
• 1996

In physical and reactive extraction system using equilibrium extraction equipment, the effects of extractants, concentration of extractant, and solvent on the degree of extraction were investigated. The organic acids used were acrylic acid and metacrylic acid. Extractants were n-octylamine(OA), di-n-octylamine(DOA), tri-n-octylamine(TOA) and tri-octylmetyl ammonium chloride(TOMAC ; Aliquat 336). We found that the degree of extraction for reactive extraction was 2~9 times than that for physical extraction and that effect of extractants on the degree of extraction of organic acid was the order of OA

• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.267-271
• /
• 2011

Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.