• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.28-33
• /
• 2022

A pipe is a hollow, long-form part that is primarily used to transport fluids, such as liquids or gases. Pipes are used in a range of applications in different fields from mechanical purposes to architecture and electrical uses. Despite the significance owing to various usability of pipes, few studies have been conducted using the physical property test method. The tensile test is widely used as a method to check the physical properties of the pipe. The existing pipe tension test contains the possibility to cause errors, which are fractures outside the gauge distance and cross-sectional deformation of the pipe. In this study, a novel pipe tension test method using a jig is presented and pipes with various materials are tested. It is expected that the proposed method can reduce errors that occur in conventional pipes and also obtain more accurate values to enable more efficient testing.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.75-82
• /
• 2011

LB71350 is an HIV protease inhibitor with poor aqueous solubility and extensive first pass effect. The purpose of the present study was to test the feasibility of solid dosage form of LB71350 with improved bioavailability utilizing solid dispersion. Three different compositions with varying ratio of (LB71350: Gelucire 44/14: Tween 20) were studied. Capsule filling of these solid dispersion compositions was tested using a semi-automatic capsule filling system. Oral bioavailability in dog was tested. Chemical and physical stability at 4, 25 and $40^{\circ}C$ was monitored by HPLC assay, dissolution test, powder XRD and microscopy. The capsule filling system yielded uniform products of drug loading up to 10%. Oral bioavailability in dog was improved compared to the aqueous suspension of crystalline LB71350. Capsules were chemically stable for up to 6 months at $40^{\circ}C$. However, there were temperature and composition dependent physical changes. Decrease in dissolution rates after storage at $40^{\circ}C$ was due to the polymorphic change. In conclusion, manufacturing process, bioavailability, and physico-chemical stability have been considered to propose a solid dispersion capsule formulation for the HIV protease inhibitor with poor physico-chemical properties. A new less soluble crystalline form identified during the physical stability test warrants further study.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.327-332
• /
• 2014

Polymer/wood flour composites are recently attracting a lot of interest because they are economic and ecofriendly. In this study, the effects of wood flour size on the thermal and mechanical properties of a polypropylene/wood flour composite were investigated. Mechanical properties of the composite samples prepared by melt-mixing and compression molding were tested by UTM and an izod impact tester, and thermal properties of them were measured by TGA, DMA, DSC and TMA. The best coupling agent was selected by testing three kinds of maleic anhydride modified polypropylene coupling agents, and under the same condition, the effects of wood flour size on the physical properties of the composite were investigated. According to the test results for four different wood flour sizes of 600, 250, 180 and $150{\mu}m$, flexural strength, flexural modulus, crystallinity and water-resistivity of the composite increased with decreasing wood flour size.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.649-654
• /
• 2002

In order to suggest recyling and handling method of a tailing, observe it's physical and chemical properties, make an quality test of aggregates which are used a tailing and then examine a applied possibility in architectural materials. Tailing has a ununiform and many-side shape and it is organized quartz, muscovite, calcite, montmorillonite. pH is 6.86-7.28 and the result of leaching test is that Hg and Pb exceed of a standard. The specific gravity of aggregates which are used tailing is 1.95-2.23 and the absorption factor is 9-14.67%. The result of test for abrasion and crushing of aggregates which are used BFS is very excellent. The heavy metal is stabilized but a eruption property of Hg is similar to original sample.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.571-574
• /
• 2005

This study investigated the strength of concrete to improve construction material with polymer cement mortar. Some mixtures composed of Styrene-Butadiene Rubber(SBR) and Ethylene Vinyl Acetate(EVA) Poly Vinyl Alcohol(PVA) were studied. The three mixtures carried out the physical, mechanical test to determine its properties which a include : compressive, flexural, bond strength test. The test results show that the compressive strength was increased at long-term age when compared to early ages for increasing polymer contents. It was found that flexural strength and bond strength became larger as polymer to cement ratio became higher.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.2
• /
• pp.53-56
• /
• 2008

Polyvinylchloride(PVC) is variously used to produce food packaging, wrap film, sealing compound of drinking bottle cap. Safety of these PVC food package is controlled by Food Code, PVC regulation. This study was carried out researches on manufacture process, physical, chemical properties and monomer(CAS No., common name, molecular structure) of PVC to help the understanding of PVC material. Also, this study helps us the understanding of regulation through researches on the foundation of PVC regulation, the purpose of test and the comment of test method. It is considered that these informations of material properties and explanations of test method are very useful to PVC producers, users and analyzers of them.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.41-44
• /
• 2007

Recently, the strenuous industrial waste is scattered and one of the oyster also make the serious environmental contamination. The purpose of this study is investigating an utilization ability as calcium binder of the oyster with Hwang-To according to a rate(10%, 20%, 30%, 40%, 50%). This study grasp physical properties of the oyster powder, bake production of the paste, and conduct the flow test, stiff time test and strength test. According to baking condition, strength of $1000^{\circ}C$(120minutes, rate 30%) is higher than any other condition. The oyster powder from above $900^{\circ}C$ seem possibility as binder hereafter. It is thought that the continuous research will be necessary.

• Structural Engineering and Mechanics
• /
• v.84 no.4
• /
• pp.465-477
• /
• 2022

The formation of biopolymer-soil matrices mainly depends on biopolymer type and concentration, soil type, pore fluid and phase transfer to influence its strengthening efficiency. In this study, the physical and mechanical properties of sodium alginate (SA) treated kaolinite are investigated through compaction test, thread rolling teat, fall cone test and unconfined compression test with considering biopolymer concentration, curing time, initial water content, mixing method. The results show that the liquid limit slightly decreases from 69.9% to 68.3% at 0.2% SA and then gradually increases to 98.3% at 5% SA. At hydrated condition, the unconfined compressive strength (UCS) of SA treated clay at 0.5%, 1%, 2% and 3% concentrations is 2.57, 4.5, 7.1 and 5.48 times of untreated clay (15.7 kPa) at the same initial water content. In addition, the optimum biopolymer concentration, curing time, mixing method and initial water content can be regarded as 2%, 28 days, room temperature water-dry mixing (RD), 50%-55% to achieve the maximum unconfined compressive strength, which corresponds to the UCS increment of 593%, compared to the maximum UCS of untreated clay (780 kPa).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.173-182
• /
• 2001

The physical properties and biodegradability of cellulose fabrics, such as cotton and rayon, are expected to vary with textile care. In this study cotton and rayon fabrics were washed repeatedly with detergents, bleaches, or softeners. The changes of physical properties were investigated by measuring retention of breaking strength, shrinkage, handle, and the fiber surface was observed by SEM. The biodegradability of fabrics was also estimated by soil burial test. The results were as follows. Cotton fabrics laundered repeatedly by detergents and bleaches lost virtually no strength. The breaking strength of the rayon fabrics decreased by about 17%∼25% after repeated launderings. Shrinkage in weft direction was much larger than that in warp direction. Bending rigidities of both fabrics decreased remarkably within 10 wash cycles. Shear rigidity in cotton fabrics increased continuously with repeated washing cycles, however, that in rayon fabrics did not show any change as washing went on. Friction coefficient increased in both fabrics after 10 wash cycles, and this is thought to be attributed to the wrinkle, interlocking of hairs, surface damage resulted from repeated washings. In cotton fabrics made of staple yarns, short hairs on the yarn surface entangled together with repeated launderings. This resulted in the continuous increase in % shrinkage, shear rigidity, friction coefficient. Rayon fabrics made of filament yarns, however, did not show this phenomenon. Softener treated fabrics showed the lowest values in bending rigidity, shear rigidity and friction coefficient because the cationic surfactants adsorbed on the fiber surface behaved like lubricants. The biodegradability of fabrics was noticeably affected by the composition of washing solutions. The fabrics washed with detergents and bleaches were decomposed faster than those washed with the others were and the cotton fabrics washed with detergents and softeners hardly degraded. The fabrics soiled with milk were decomposed almost completely and those soiled with Palmitic acid did not degrade greatly.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.542-546
• /
• 2009

Recently, silver has been applied to various fields due to antimicrobial property and high conductivity. We manufactured high-performance ophthalmic material containing silver which could protect eye from environmental factors. We mixed $AgNO_3$ with conventional contact lens material. And then we copolymerized at 70 ${^{\circ}C}$ for 40 minutes under water bath, and estimated antimicrobial activity and physical properties. We used solid culture and liquid culture medium for antimicrobial test. The results of contact lens containing silver showed good antibiosis. In case of physical properties, the results showed 32.35%(water content) and 88.34% (visible transmittance) for each. We judged that we made the copolymer with antimicrobial and physical properties which is suitable for conventional contact lens.