• Title/Summary/Keyword: Physical layer

Search Result 1,951, Processing Time 0.027 seconds

Performance Comparison of Coherent and Non-Coherent Detection Schemes in LR-UWB System

  • Kwon, Soonkoo;Ji, Sinae;Kim, Jaeseok
    • Journal of Communications and Networks
    • /
    • v.14 no.5
    • /
    • pp.518-523
    • /
    • 2012
  • This paper presents new coherent and non-coherent detection methods for the IEEE 802.15.4a low-rate ultra-wideband physical layer with forward error correction (FEC) coding techniques. The coherent detection method involving channel estimation is based on the correlation characteristics of the preamble signal. A coherent receiver uses novel iterated selective-rake (IT-SRAKE) to detect 2-bit data in a non-line-of-sight channel. The non-coherent detection method that does not involve channel estimation employs a 2-bit data detection scheme using modified transmitted reference pulse cluster (M-TRPC) methods. To compare the two schemes, we have designed an IT-SRAKE receiver and a MTRPC receiver using an IEEE 802.15.4a physical layer. Simulation results show the performance of IT-SRAKE is better than that of the M-TRPC by 3-9 dB.

Physical Properties and Characteristics of Freezing of the Sub-base Materials with a Grain Size Distribution (보조기층재의 입도에 따른 물리적 특성 및 동상 특성)

  • Chae, Chang-Woo;Song, Chang-Seob
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.54 no.5
    • /
    • pp.155-160
    • /
    • 2012
  • In this paper it was analyzed that the mechanical properties, the permeability and the freezing properties of SB-2 materials which are mainly used with the subbase materials. To this ends, a series of the physical test, the permeability test and the freezing test were carried out the samples mixed the small aggregate and the big aggregate from which was re-classified the SB-2. From the test results, it was analyzed the characteristics of permeability and the characteristics of freezing of the samples. And it was reviewed for SB-2 materials that the use of possibility for the freezing prevention layer material.

Design of a Communication Protocol for the Distributed Control System of the Nuclear Power Plants (원자력 발전소 분산제어시스템의 통신 프로토콜 설계)

  • 이성우;윤명현;문홍주;이병윤
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1999.11a
    • /
    • pp.143-148
    • /
    • 1999
  • A distributed real-time system that is being wed now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

  • PDF

A Cooperative Jamming Based Joint Transceiver Design for Secure Communications in MIMO Interference Channels

  • Huang, Boyang;Kong, Zhengmin;Fang, Yanjun;Jin, Xin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.13 no.4
    • /
    • pp.1904-1921
    • /
    • 2019
  • In this paper, we investigate the problem of secure communications in multiple-input-multiple-output interference networks from the perspective of physical layer security. Specifically, the legitimate transmitter-receiver pairs are divided into different categories of active and inactive. To enhance the security performances of active pairs, inactive pairs serve as cooperative jammers and broadcast artificial noises to interfere with the eavesdropper. Besides, active pairs improve their own security by using joint transceivers. The encoding of active pairs and inactive pairs are designed by maximizing the difference of mean-squared errors between active pairs and the eavesdropper. In detail, the transmit precoder matrices of active pairs and inactive pairs are solved according to game theory and linear programming respectively. Experimental results show that the proposed algorithm has fast convergence speed, and the security performances in different scenarios are effectively improved.

Secure Performance Analysis Based on Maximum Capacity

  • Zheng, Xiuping;Li, Meiling;Yang, Xiaoxia
    • Journal of Information Processing Systems
    • /
    • v.16 no.6
    • /
    • pp.1261-1270
    • /
    • 2020
  • The physical security layer of industrial wireless sensor networks in the event of an eavesdropping attack has been investigated in this paper. An optimal sensor selection scheme based on the maximum channel capacity is proposed for transmission environments that experience Nakagami fading. Comparing the intercept probabilities of the traditional round robin (TRR) and optimal sensor selection schemes, the system secure performance is analyzed. Simulation results show that the change in the number of sensors and the eavesdropping ratio affect the convergence rate of the intercept probability. Additionally, the proposed optimal selection scheme has a faster convergence rate compared to the TRR scheduling scheme for the same eavesdropping ratio and number of sensors. This observation is also valid when the Nakagami channel is simplified to a Rayleigh channel.

Broadband Microstrip Antenna (광대역 마이크로스트립 안테나)

  • 홍재표
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.4 no.4
    • /
    • pp.111-116
    • /
    • 1999
  • In this paper, the electromagnetically coupled microstrip dipole antenna by adapting one parasitic metal-strip(dipole) between the microstrip transmission line open end and the radiating microstrip dipole antenna is presented for the bandwidth improvement The microstrip dipole antenna is simulated using Ensemble 51 simulation package The effects of varying several physical parameters, such as the lengths of radiating dipole and parasitic dipole and the width of parasitic dipole are investigated The bandwidth behavior of the 3-layer optimum antenna is compared with that of 2-layer antenna without the parasitic dipole. Experimental result for the obtained broadband performance is presented and discussed.

  • PDF

Effect of MWCNTs/PSf support layer on the performance of polyamide reverse osmosis membrane (탄소나노튜브가 첨가된 폴리술폰 지지체가 폴리아미드 역삼투막의 성능에 미치는 영향)

  • Min, Choong-Sik;Kim, Seung-Hyun
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.34 no.2
    • /
    • pp.127-137
    • /
    • 2020
  • In this study, a MWCNT(multi-wall carbon nanotube) was added to polysulfone(PSf) support layer to improve flux of TFC(thin film composite) RO(reverse osmosis) membrane. Two different kinds of MWCNT were used. Surfaces of some MWCNTs were modified hydrophilically through acid treatment, while those of other MWCNTs were modified through heat treatment to maintain their hydrophobicity. MWCNT/PSf support layer was prepared by adding PSf to the NMP mixed solvent containing 0.1 wt% MWCNTs using a phase inversion method. The surface porosity of the MWCNT/PSf support increased by 42~46% while its surface pore size being maintained. The TFC RO membrane made of MWCNT/PSf support layer showed a 20% flux increase while its salt rejection characteristics is sustained. In addition, the MWCNT/PSf support layer has better mechanical stability than the PSf support layer, there resulting in an increased resistance of flux reduction due to physical pressure.

Digital X-ray Detector에 적용을 위한 Polycrystalline CdTe 구조에 따른 전기적 신호 연구

  • Kim, Jin-Seon;O, Gyeong-Min;Jo, Gyu-Seok;Song, Yong-Geun;Hong, Ju-Yeon;Heo, Seung-Uk;Nam, Sang-Hui
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.484-484
    • /
    • 2013
  • 기존 진단용 Digital X-ray Detector이 직접방식에서는 a-Se (Amorphous Selenium)이 대중화되었지만 고전압을 인가하여야한다는 점과 그로 인한 물질 자체의 Life time 감소 등 여러 단점들 때문에 기타 후보물질들로 HgI2, PbI2, PbO, CdTe, CdZnTe가 연구 되고 있다. 이러한 후보 물질들 중 본 연구에서는 PVD (Physical Vapor Deposition)방식을 이용하여 Polycrystalline CdTe 박막을 제작하고 특성 향상을 위해 유전물질을 Passive layer와 Protect layer로써 증착하였다. 또한 유전체층의 위치에 따른 특성 분석을 위해 제작된 박막은 FE-SEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction)을 통해 구조적인 특성을 확인하였다. 그리고 입사되는 X-ray 선량에 의해 생성되는 전기적 특성을 분석하였다, 그 결과 박막의 Grain Size는 약 $5{\mu}M$이며 (111)방향의 주 peak를 띄는 Poly CdTe형태로 증착된 것을 확인하였다. 전기적인 신호 결과 Passive layer와 Protect layer를 증착한 박막 모두 Darkcurrent가 감소된 것을 확인하였다. 또한 Sensitivity 측정 결과 Passive layer를 삽입한 경우 신호 값이 감소하였으며 Protect layer를 삽입한 경우 신호 값의 변화가 일어나지 않았다. 그러므로 Protect layer를 등착한 박막의 경우 SNR이 현저히 높아지는 결과를 낳았다.

  • PDF

A Study on the Characteristics of Yellow Layer Cake with Added Buckwheat Flour (메밀 가루를 첨가한 Yellow Layer Cake의 특성에 관한 연구)

  • Shin, Eon-Hwan
    • The Korean Journal of Food And Nutrition
    • /
    • v.20 no.4
    • /
    • pp.414-420
    • /
    • 2007
  • The purpose of this study was to investigate the properties of yellow layer cake with added buckwheat flour. The physical properties of the cake flour with added buckwheat flour were tested by RVA, farinogram, and alveogram, and then, after making the yellow layer cake, the samples were analyzed by rheometer. We found that the pasting temperature decreased with the addition of buckwheat flour in the cake flour, but peak viscosity, holding strength, and final viscosity increased. For the farinogram, the flour containing buckwheat showed increases for consistency and water absorption, but stability was decreased. The $P_{max}$ of the alveogram was not consistent according to the addition of buckwheat flour to the cake flour. The L- and G-values showed decreases, but they were not significant. After making the yellow layer cakes with added buckwheat flour, crumb softness was analyzed with storage for 7 days. The hardness and Max. G of the yellow layer cakes with buckwheat flour increased, and the highest values were after 1 day of storage. However, springness decreased with the addition of buckwheat flour as compared to the control, and showed the highest value at 7 days.

Stochastic MAC-layer Interference Model for Opportunistic Spectrum Access: A Weighted Graphical Game Approach

  • Zhao, Qian;Shen, Liang;Ding, Cheng
    • Journal of Communications and Networks
    • /
    • v.18 no.3
    • /
    • pp.411-419
    • /
    • 2016
  • This article investigates the problem of distributed channel selection in opportunistic spectrum access networks from a perspective of interference minimization. The traditional physical (PHY)-layer interference model is for information theoretic analysis. When practical multiple access mechanisms are considered, the recently developed binary medium access control (MAC)-layer interference model in the previous work is more useful, in which the experienced interference of a user is defined as the number of competing users. However, the binary model is not accurate in mathematics analysis with poor achievable performance. Therefore, we propose a real-valued one called stochastic MAC-layer interference model, where the utility of a player is defined as a function of the aggregate weight of the stochastic interference of competing neighbors. Then, the distributed channel selection problem in the stochastic MAC-layer interference model is formulated as a weighted stochastic MAC-layer interference minimization game and we proved that the game is an exact potential game which exists one pure strategy Nash equilibrium point at least. By using the proposed stochastic learning-automata based uncoupled algorithm with heterogeneous learning parameter (SLA-H), we can achieve suboptimal convergence averagely and this result can be verified in the simulation. Moreover, the simulated results also prove that the proposed stochastic model can achieve higher throughput performance and faster convergence behavior than the binary one.