• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.911-914
• /
• 1992

We have investigated the micro-discharge in plasma display panel using 2 dimensional 2 fluid MHD equations. Plasma display utilizes the physical phenomena of the normal glow or abnormal glow and is considered to be able to provide the largest display area among various flat panel. 2 fluid, 2 dimensional Magneto-Hydro-Dynamic equations are applied to Computational field of 100${\times}$800${\mu}m^2$. Time varing glows and after-glows were investigated for 11 $\mu$sec. We obtained the distribution of the microscopic variables such as the density, temperature, velocity of Ne+Ar0.1% gas plasma. During the first 6$\mu$ sec, glow discharge dued to DC pulse was investigated. Time varing phenomena of after-glow was also investigated during the last 5 $\mu$set. From results, it was found that the driving efficiency of a DC Plasma Display Panel could be improved when the diffusion of ions and electrons are controlled by the pulses applied to the auxiliary anode.

• KIEAE Journal
• /
• 제13권6호
• /
• pp.83-91
• /
• 2013

Cool roofs are currently being emerged as one of important mechanism to save energy in relation to the building. It is specifically proposed that the changing trends of rooftop surface temperature in the flat roof building model could be used effectively as an indicator to reduced cooling load reduced by cool roof since it can present stable temperature record, that is not influenced according to the nearby physical as well as human variables. The temperature of cool roof in summer was lower around $20^{\circ}C$, compared to the general roofs. Such a seasonal or daily comparative study for rooftop temperature in the building model will highlight that the cool roof efficiency could be calculated in much area-wide context according to rooftop color distribution in urban residential area. It is anticipated that this research output could be used as a valuable reference in identifying energy saving by cool roof since an objective monitoring has been proposed based on the rooftop temperature in the building model, fully quantitative performance of thermal infrared image.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.87-95
• /
• 2004

Economic development is remarkable in Asia and progress of industrialization of NIES, ASEAN, and China in East Asia has increased the international physical distribution in this area. However, an imbalance of trade becomes severe in these areas. The imbalance is especially big in the Asia-North America route and the Japan-China route. The imbalance in the Asia -North America liner route is 5.04 million TEUS in 2002.The transportation ratio of loaded containers between China and Japan route is approximately 3:1 in 2000. In other words, it means that the transportation of loaded containers from China to Japan is 3, the transportation of loaded containers from Japan to China is I. The imbalance at a port is generally obtained by subtracting export loaded container cargo volume from import container cargo volume. However, the imbalance and the empty containers at the port are not always same. Then, in order to evaluate rationalization and efficiency of maritime container transportation, we introduce the amount of empty containers at a port as an evaluation index. However, the past data of the amount of handling empty containers have a lot of lacking portions. Then, it is necessary to estimate the past amount of empty containers in order to grasp the amount of empty containers historically. So, we construct the model that estimates the amount of empty containers using the imbalance of main port statistics in Japan.

• 산학경영연구
• /
• 제3권
• /
• pp.47-75
• /
• 1990

This study focuses on the ecological and environmental approach for marketing in the attempt to harmonize the objectives and resources of the organizations with the changing environment. This study presents the deductive and nomative method for analyzing recurrent marketing problem and contains seven chapters. The marketing environment is the place the company must start in searching for oportunities and in monitoring threats. It consists of all the actors and forces that affect the company's ability to transact can be divided into two componets-The marketing environment comperies a microenvironment consists of the actors in the company's immediate environment that affect its ability to serve its customers, namely, the company, market channal firms, customers, competitors and publics, the macroenvironment consists of the larger societal forces that affect all the actors in the macroenvironment, nanly, the demographic, economic, natural, technological and cultural forces. Most marketing executives took the phyisical environment for granted. Few consistered it one of the most dynamic elements in the totoal environment of business. However, two development have brought the physical environment to the forefront of business decision. The first has been labeled the ecological crisis-the polution and deterioration of air, water and land, the second is the accelerated depletion of the earth's natural resources. Currently, most product are designed to obtain an optimum combination of customer acceptances and production and distribution efficiencies. If we look to the future, products increasingly will be planned to obtain an optimum combination of market acceptance increasingly, efficiency and environmental protection. The entire ecological cycle of product will have to be considered.

• 융합신호처리학회논문지
• /
• 제2권4호
• /
• pp.46-52
• /
• 2001

방사광을 이용한 형강 X선 CT 이미징의 고속화를 위한 촬상 시스템과 처리 알고리즘을 검토하였다. 본 논문에서 사용된 촬상시스템은 고계수율 영역에서 안정된 동작을 한 전자 시스템으로 불감시간이 약 6%로 감소되고 계측시간의 경우도 1 점 당 3초로 단축되었다. 또한 재구성 알고리즘의 효율화를 증명하였고, 메모리와 계산량을 약 1/100로 감소시켰다. 물리적 phantom으로 그 정량성을 확인하였고, 시험관내의 갑상선의 화상으로부터 요드 분포를 추정하였다. 이러한 결과는 생체내에서 형광 X선 CT 계측의 실현 가능성을 보여준 것이다.

• 설비공학논문집
• /
• 제28권2호
• /
• pp.69-74
• /
• 2016

Most hot water heating valves for apartments are constant-flow types, which limit the flow rate through an individual household for even distribution of heating water to other households. The constant-flow type is implemented by an on-off control. As a result, heating water is supplied intermittently and hence, indoor air temperature also fluctuates. Returning water temperature is also high, which reduces energy efficiency. To implement continuous feedback control, the indoor temperature dynamics was simulated to fit a measured temperature history by a state-of-the-art physical model. From the model, it was found that the most important disturbance is outdoor temperature and its effect on indoor temperature lasts about an hour. To cope with the slow response and the significant disturbance, a prediction control with proportional feedback is proposed. The control was found to be successful in implementing continuous heating water flow and improved indoor temperature control.

• 한국전자파학회논문지
• /
• 제24권9호
• /
• pp.908-914
• /
• 2013

에너지 보존 법칙과 스넬(Snell)의 법칙 및 경로 길이에 의한 동위상의 조건으로부터 수정곡면 캐서그레인 안테나 반사판의 단면을 설계하였다. 원형 개구면에서 균일 개구면 위상을 갖도록 개구면의 수직 및 수평 급전분포 함수에 따른 동위상 조건을 만족하는 3차원 반사판 곡면의 프로파일을 구하였다. 직경 55 ${\lambda}_0$의 크기를 갖는 Ku 밴드용 수정 곡면 캐서그레인 안테나 반사판을 물리광학에 의한 시뮬레이션 결과, 36.4 dB, 33.9 dB의 부엽 레벨을 AZ 및 EL 방향에 대해서 각각 얻을 수 있었으며, 이전 안테나와 비교하여 10 %의 지향성 개선효과가 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1576-1589
• /
• 2006

Most of surface water ways in Egypt suffer from the infestation of aquatic weeds especially submerged ones which cause lots of problems for the open channels and the water structures such as increasing water losses, obstructing the water flow, and reducing the efficiency of the water structures. Accurate simulation of the water flow behavior in such channels is very essential for water distribution decision makers. Artificial Neural Network (ANN) has been widely utilized in the past ten years in civil engineering applications for the simulation and prediction of the different physical phenomena and has proven its capabilities in the different fields. The present study aims towards introducing the use of ANN technique to model and predict the impact of the existence of submerged aquatic weeds on the hydraulic performance of open channels. Specifically the current paper investigates utilizing the ANN technique in developing a simulation and prediction model for the flow behavior in an open channel experiment that simulates the existence of submerged weeds as branched flexible elements. This experiment was considered as an example for implementing the same methodology and technique in a real open channel system. The results of current manuscript showed that ANN technique was very successful in simulating the flow behavior of the pre-mentioned open channel experiment with the existence of the submerged weeds. In addition, the developed ANN models were capable of predicting the open channel flow behavior in all the submerged weeds' cases that were considered in the ANN development process.

• 농업생명과학연구
• /
• 제44권3호
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Computers and Concrete
• /
• 제24권3호
• /
• pp.185-192
• /
• 2019

In this paper, the buckling of micro sandwich hollow circular plate is investigated with the consideration of the porous core and piezoelectric layer reinforced by functionally graded (FG)carbon nano-tube. For modeling the displacement field of sandwich hollow circular plate, the high-order shear deformation theory (HSDT) of plate and modified couple stress theory (MCST) are used. The governing differential equations of the system can be derived using the principle of minimum potential energy and Maxwell's equation that for solving these equations, the Ritz method is employed. The results of this research indicate the influence of various parameters such as porous coefficients, small length scale parameter, distribution of carbon nano-tube in piezoelectric layers and temperature on critical buckling load. The purpose of this research is to show the effect of physical parameters on the critical buckling load of micro sandwich plate and then optimize these parameters to design structures with the best efficiency. The results of this research can be used for optimization of micro-structures and manufacturing different structure in aircraft and aerospace.