• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.627-637
• /
• 2013

기후변화가 산업단지에 미치는 영향은 지자체에까지 확산될 수 있으며 물리적, 경제적인 영향이 미쳐지므로 어떠한 물리적, 경제적 변수에 의해 산업단지의 피해가 초래되는지 규명될 필요가 있다. 따라서 본 연구는 국가 산업단지를 대상으로 산업단지 및 입지 시군구의 물리적, 경제적 특성을 기반으로 한 기후변화 취약성 평가를 수행하고 산업단지 입지에 영향을 미치는 시간, 공간별 극한기후를 규명하고자 하였다. 산업단지의 극한기후에 의한 취약성은 IPCC에서 제안한 상향식 취약성 평가 방법을 따라 분석되었으며 전력요구도, 위험지역유무 등 단지의 물리적 입지조건과 입지 지자체의 기반시설 현황, 지자체와 산업단지의 경제적 특성 등이 평가 기준으로 연구되었다. 기후노출, 민감도, 적응 능력의 항목별 가중치와 항목내 변수들의 가중치 분석에 AHP가 적용되었다. 본 연구는 홍수, 가뭄, 혹서, 혹한, 해수면상승에 대해 취약 입지 시군구를 밝혔고 홍수와 가뭄, 혹서와 혹한별로 대비되는 취약성 결과가 나옴을 고찰하였다. 또한, 각 극한기후별로 적응능력 함양이 시급한 시군구를 밝혀 지자체 차원의 노력이 필요한 시군구를 규명하였다. 서울시 금천구는 산업단지 입지에 가장 취약한 지역으로 나타났으며 홍수, 혹한에서 높은 취약성을 보임이 분석되었다. 한편, 극한기후의 발생에도 불구하고 전반적으로 낮은 취약성을 보인 산업단지 입지 지자체는 광주광역시, 전라북도 익산, 제주시 등으로 분석되었다. 따라서 본 연구는 산업단지의 업종에 따라 적합하지 않은 입지 지역을 규명하였으며 향후 산업단지 입지의 잠재 기후변화 영향을 고려한 의사결정을 지원할 수 있다.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.149-166
• /
• 2004

Water quality and ecological environment in the Han River estuary was analyzed using the longterm water quality monitoring data from National Fisheries Research and Development Institute (NFRDI) and the existing data collected in this area. Based on the salinity distribution and changes of current direction in the lower Han River and its estuary, boundaries of the estuary were identified and also, distribution patterns of the phyto- and zooplankton, benthos, ichthyoplankton and fish were discussed related with the salinity changes in the macrotidal subestuary of Han River. Seasonal and spatial distribution of salinity suggested that the direct impact of freshwater be limited to the Incheon North Harbour all the year round and even extended to the southern area of Gyunggi Bay near Palmi island during limited time, usually in summer. Upper limit of salt water intrusion through the Han River is likely to be Singok underwater dam located Gimpo, Gyunggi Province, and normally limited to much lower part of the river, Jeonryuri, Gimpo. Biological boundaries of the Han River estuary exceeded the physical boundaries based on the salinity distribution. Many estuarine species in plankton and fish were found at the totally freshwater or saltwater depending on the seasons and tidal cycles. Some estuarine ichthyoplanktons showed extremely limited distributions in the estuary whereas adult fish revealed wide ranges of salinity adaptation. Critical environmental issues in the Han River estuary and its drainage basin are likely to be 1) pressure on development-promoted district for new town in the drainage area of the estuary, 2) reduction of tidal flat by reclamation, 3) pollutant input through river from municipal sewages and industrial wastes, and 4) ecological barrier between river and terrestrial systems by the military wire fence and riverside road.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.303-315
• /
• 1995

An adequate and homogeneous cure of light-activated restroative material is very important for improvement of marginal adaptation and prevention of marginal leakage, secondary caries and pulpal irritation as well as expressing natural physical property of that material. The purpose of this study was to evaluate the change of surface hardness and cure uniformity of light-activated glass ionomer cements. Restorative(Fuji II LC, Vitremer) and lining(Baseline VLC, Vitrebond) light-activated glass ionomer cements were investigated for this study. The surface hardness of the top and bottom surfaces and cure uniformity of each 1mm, 1.5mm, 2mm, 2.5mm & 3mm in the thickness of specimen were measured immediately, at 1 hour, 24 hours and 1 week after light activation. The surface hardness change and cure uniformity of all the specimens were measured by Knoop hardness tester. The results were as follows. 1. The surface hardness of top and bottom surfaces in all groups increased with time(p<0.01). 2. Both top and bottom surfaces hardness of Vitrebond group measured immediately after light-activation were significantly lower than those of the other groups(p<0.01). 3. The surface hardness of top and bottom surfaces of restorative light -activated glass ionomer cements was higher than those of lining materials at 1 week(p<0.10). 4. Surface hardness of Vitremer group decreased as the specimen thickness increased, except top and bottom surfaces hardness of the specimen at 1 week(p<0.01). There was no significant difference in the surface hardness of Fuji II LC with changes in the thickness except bottom surface hardness of specimen at 24 hours and 1 week (p>0.05). 5. Surface hardness of Vitrebond group significantly decreased as the specimen thickness increased(p<0.01). There was no significant difference in the surface hardness of Baseline VLC group with changes in the thickness except bottom surface hardness of specimen measured immediately after light -activation(p>0.05). 6. The hardness ratio of top against bottom surface in all groups decreased with time(p<0.05). 7. There was no significant difference in the hardness ratio of top against bottom surface with changes of the thickness except Vitrebond group, 24 hours and 1 week of Vitremer group and 1 week of Baseline VLC group (p>0.05). These results suggest that surface hardness of restorative ligh-activated glass ionomer cements were highter than those of lining light-activated materials. In all groups, the surface hardness and cure uniformity continuously increased with time.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.110-121
• /
• 2018

The present article is concerned with a study on the daily training protocol for field crews wearing chemical protection clothing for firefighting and the analysis of activity. To improve coping ability of & secure safety for firefighting crews initially incorporated in the fields of chemical accident & chemical terror, 10 steps in total of daily training protocol have been designed. The designed protocol is largely composed of the extensive activity protocol for daily adaptation of firefighting chemical protection clothing (steps 1, 2, 6, 7 & 9), the precision operation protocol utilizing hands (steps 3, 4 & 5), and the protocol requiring strong physical burdens (steps 8 & 10). According to the measurement results for activity as a result of the protocol, the average maximum heart rate upon wearing the firefighting chemical protection clothing was shown to increase by step 1 20.32%, step 2 18.69%, step 3 25.23%, step 4 34.77%, step 5 27.44%, step 6 30.24%, step 7 25.33%, step 8 22.25%, step 9 22.80% and step 10 20.85% compared with the time of not wearing them. The average maximum breathing rate was shown to increase by step 3 1.92%, step 4 4.11%, step 5 1.24%, step 6 3.95%, step 7 0.93%, step 8 10.23%, step 9 3.36% and step 10 15.10%, except for steps 1 & 2.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.177-182
• /
• 2010

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In the developing process of a hardware component in system, the design phase has been regarded as a phase consuming lots of time and cost. However, the verification phase in which functionality of the designed component is verified has recently been considered as a much important phase. In this paper, the implementation of a verification environment which is based on SystemC infrastructure and verifies the functionality of a hardware component is described. The proposed verification system uses SystemC user-defined channel as communication interface between variables of SystemC module and registers of Verilog module. The functional verification of an UART is performed on the proposed verification system. SystemC provides class library for hardware modeling and has an advantage of being able to design a system consisting hardware and software in higher abstraction level than register transfer level. Source codes of SystemC modules are reusable with a minor adaptation on verifying functionality of another hardware component.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.388-397
• /
• 2012

The tennis was one of the most popular sport in the general physical education lesson. However there are many problems such as difficult of improvement tennis skill, lack of class days and so many students in a class. These reasons could ultimately damage the overall quality of class. The purpose of this research was to beginner students was fun and easy to learn. The tennis lesson using tools were 1.selective hitting ball, 2. high net hitting ball, 3. hitting orange ball. Scores of the experimental group(n=23) and the control group(n=21) were compared. In order to verify course content was the same 15 weeks, conducted a tennis teaching methods to take advantage of the tools. And tools to take advantage of the students who participated in a class analysis of the qualitative data (interviews, documents, questionnaires, observations, journals). As a result, the satisfaction scores of the experimental group were higher than those of the control group. The tennis lesson using tools to take positive effect(meaning, improved skill, easy, fun/curious/confident) and negative effect(difficulties of adaptation, a high challenge level) was induced. In summary of the quantitative/qualitative data 'Orange Ball' has a positive impact on the girls than boys and teaching methods using tools gave generally positive influence to students.

• Research in Community and Public Health Nursing
• /
• v.16 no.4
• /
• pp.498-507
• /
• 2005

Purpose: The purpose of this study is to survey health requirements of middle-aged women and their families and to provide guidelines for developing nursing interventions by describing the process of family health maintenance experienced by middle-aged women and its conceptual system. Methods: To get saturated data, each of four researchers conducted two or three times of in-depth interview with eight middle-aged women aged between 40-64 years old and living in Seoul and Chuncheon from the 10th to the 30th of October 2004 and each interview was continued one or two hours. The Grounded theory adopted by Strauss & Corbin (1998) is a substantive theory that can explain the experiencing process of middle-aged women. Results: We found that the casual condition of family health maintaining by middle-aged women was 'confidence of health belief', and 'pouring by body moving' was found to be its phenomenon. A textual condition that might respond to the phenomenon was 'fatal roles acceptance', and intervening conditions that promote their family health were 'retracing' and 'gathering health information'. These intervening conditions impacted middle-aged women's confidence in family health and led them to take actions/interactions such as 'being a model of health', 'adapting to circumstances', 'do-it-myself', 'taking-care' 'harmonious mind' and 'the pursuit of cleanness'. These actions/interactions produced results such as 'being stronger', 'being unmanageable' and 'being fruitful'. Conclusions: Health confidence and practical health behaviors were observed in the process that the middle-aged female participants experienced unmanageable circumstances but they accepted their roles and responsibilities and recognized that they must be get stronger. The behaviors of health-together-with were divided into enthusiastic type, adaptation type and self-sacrificing type. Therefore middle-aged woman with the understanding of family health maintaining process as well as the theoretical system and practical principals needs to implement the intervention in acceptable level of family health process of preventing psychological and physical problems.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.976-982
• /
• 2016

Seaweed has high growth rate, low land usage, high CO₂ absorption and no competition for food resources. Therefore, the use of lignin-free seaweed as a raw material is arising as a third generation biomass for bioethanol production. Various pretreatment techniques have been introduced to enhance the overall hydrolysis yield, and can be categorized into physical, chemical, biological, enzymatic or a combination. Thermal acid hydrolysis pretreatment is one of the most popular methods to attain high sugar yields from seaweed biomass for economic reasons. At thermal acid hydrolysis conditions, the 3,6-anhydro-galactose (AHG) from biomass could be converted to 5-hydroxymethylfurfural (HMF), which might inhibit the cell growth and decrease ethanol production. AHG is prone to decomposition into HMF, due to its acid-labile character, and subsequently into weak acids such as levulinic acid and formic acid. These inhibitors can retard yeast growth and reduce ethanol productivity during fermentation. Thus, the carbohydrates in seaweed require effective treatment methods to obtain a high concentration of monosaccharides and a low concentration of inhibitor HMF for ethanol fermentation. The efficiency of bioethanol production from the seaweed biomass hydrolysate is assessed by separate hydrolysis and fermentation (SHF). To improve the efficiency of the ethanol fermentation of mixed monosaccharides, the adaptation of yeast to high concentration of sugar could make simultaneous utilization of mixed monosaccharides for the production of ethanol from seaweed.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2008

In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.715-721
• /
• 2013

Minimization techniques are adaptations of Helical structure, Meta material, multi-layer structure etc. But, Helical structure is not suited to minimization technique of RF circuit having single resonant frequency. Because it generate resonant frequency following as rotation of circumference. Meta material and multi layer structure have weakness of expenditure and complex structure. In addition, conventional three dimensional M$\ddot{o}$bius Strip and planar M$\ddot{o}$bius Strip are not two dimensional planar M$\ddot{o}$bius Strip that has weakness of electrical coupling effect. Therefore, in this paper, we proposed miniaturized and reduced electrical coupling effect antenna by adaptation of Quasi M$\ddot{o}$bius Strip that topology is same as three dimensional M$\ddot{o}$bius Strip with Via-Hole structure. According to the simulation result, physical circumferential length is 1/3 minimized compared with conventional ring antenna under the same resonant frequency. In addition, coupling effect is not nearly generates near to the resonant frequency, 2.4GHz.