• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.219-233
• /
• 2010

Understanding the Nano size particles is of great interest due to their chemical and physical behaviors such as compositions, size distributions, and number concentrations. Therefore, accurate measurements of size distributions and number concentrations in ultrafine particles are getting required because expected losses such as diffusion for the instrument system from ambient inlet to detector are a significant challenge. In this study, the data using the computed settling losses, impaction losses, diffusion losses for the sampling lines (explored different sampling line diameters, horizontal length, number of bending, line angles, flow rates with and without a bypass), and diffusion losses for the Scanning Mobility Particle Sizers are examined. As expected, the settling losses and impaction losses are very minor under 100 nm, however, diffusion loss corrections for the sampling lines and the size instrument make a large difference for any measurement conditions with high numbers of particles smaller mobility size. Both with and without the loss corrections, which can affect to size distributions and number concentrations are described. First, 80% or more of the smallest particles (less than 10 nm) can be lost in the condition of a flow rate of 0.3 liter per minute and the length of sampling line of 1.0 m, second, total number concentrations of measurements are quite significantly affected, and the mode structure of the size distribution changes dramatically after the loss corrections applied. With compared to the different measurements, statistically diffusion loss corrections yield a required process of the ambient particle concentrations. Based on the current study, as an implication, a possibility of establishing direct revelation mechanisms is suggested.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.36-45
• /
• 2007

Today Human Personal Trainers are becoming very famous in this health conscious world. They teach user to achieve fitness goals in managed way. Due to their high fee and tight schedule they are unavailable to mass number of people. Another solution to this problem is to develop digital personal trainer portable instrument that may replace human personal trainers. We developed a portable digital exercise trainer device - BIOFIT that manages, monitors and records the user's physical status and workout during exercise session. It guides the user to exercise efficiently for specific fitness goal. It keeps the full exercise program i.e. exercises start date and time, duration, mode, control parameter, intensity in its memory which helps the user in managing his exercise. Exercise program can be downloaded from the internet. During exercise it continuously monitors the user's physiological parameters: heart rate, number of steps walked, and energy consumed. If these parameters do not range within prescribed target zone, the BIOFIT will alarm the user as a feedback to control exercise. The BIOFIT displays these parameters on graphic LCD. During exercise it continuously records the heart rate and number of steps walked every 10 seconds along with exercise date and time. This stored information can be used as treatment for the user by an exercise expert. Real-time ECG monitoring can be viewed wirelessly (RF Communication) on a remote PC.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.57-64
• /
• 2014

Recently, many human-friendly communication methods have been studied for human-machine interface(HMI) without using any physical devices. One of them is the vision-based gesture recognition that this paper deals with. In this paper, we define some gestures for interaction with objects in a predefined virtual world, and propose an efficient method to recognize them. For preprocessing, we detect and track the both hands, and extract their silhouettes from the low-resolution hand images captured by a webcam. We modeled skin color by two Gaussian distributions in RGB color space and use blob-matching method to detect and track the hands. Applying the foodfill algorithm we extracted hand silhouettes and recognize the hand shapes of Thumb-Up, Palm and Cross by detecting and analyzing their modes. Then, with analyzing the context of hand movement, we recognized five predefined one-hand or both-hand gestures. Assuming that one main user shows up for accurate hand detection, the proposed gesture recognition method has been proved its efficiency and accuracy in many real-time demos.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.443-448
• /
• 2010

Rapid advance in information technology requires high performance devices with compact size. Integrated multi-layer electronic element with different functions enables those compact devices to possess various performances and powerful capabilities. In mass production, the multi-layer electronic element is manufactured as a bulk type with a large number of parts for productivity. However, this may cause the electronic part to be damaged in the cutting process of the bulk elements to separate into each part. Therefore the cutting performance of multi-layer element bulk is playing an important role in the view of production efficiency. This study focuses on the cutting characteristics of multi-layer electronic elements. In order to increase the efficiency, the vibration cutting method was applied to the blade cutting machine. Flexure hinge structure, which is an physical amplifier of increasing displacement, was attached to the vibration cutting device for machining efficiency. The behaviors of flexure hinge were modeled with Lagrange equation and simulated with finite element method (FEM). Performance of hinge structure was verified by experimental modal analysis (EMA) for hinge structure to be tuned to the specific mode of vibrations. Cutting experiments of multi-layer elements were conducted with the proposed vibrating cutting module, and the characteristics was analyzed.

• Clinical and Experimental Pediatrics
• /
• v.59 no.1
• /
• pp.30-34
• /
• 2016

Purpose: Although Bednar's aphthae are common and regress spontaneously, these lesions may lead to feeding intolerance and are often misdiagnosed, rendering examinations useless. This study sheds new light on the clinical features of Bednar's aphthae. Methods: Sixteen neonates and infants were newly diagnosed with Bednar's aphthae via routine health check-ups in an outpatient clinic. Medical records were retrospectively reviewed, and the following parameters were analyzed; sex, gestational age, birth weight, mode of delivery, and perinatal problems. A physical examination was carried out during the next outpatient visit to examine the healing process and check for the existence of scars or complications. Results: Initial presentation included changes in feeding habits (n=10), longer feeding time, reduced intake, and increased irritability. In 6 patients, Bednar's aphthae were discovered incidentally, without prior symptoms. Feeding posture and method of feeding are important causes of Bednar's aphthae. Eleven patients were fed in a horizontal position, whereas 5 patients were fed in a semiseated position. Fifteen patients were bottle-fed, whereas 1 patient was exclusively breastfed. After correcting the feeding position, the ulcerative lesions disappeared within 1 month of diagnosis. During the follow-up period, lesions did not recur in any of the patients. Conclusion: This study suggests that Bednar's aphthae are caused by mechanical pressure. A diagnosis of Bednar's aphthae should be considered when lesions are found on the palate of infants and when symptoms seem to be feeding related. Proper education of parents can both treat Bednar's aphthae and easily prevent its recurrence.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.175-178
• /
• 2009

In this paper, we describe about interactive electronic book utilizing tabletop display interface and digi-pet. Because of this system can define a lot of gestures using touch point of finger, help that user experiences electronic book effectively more than existent input device. Also, support 1 users in 1 input device in existent mode, but this system can expect various effect because support Multi-user. The digi-pet(digital pet) is physical tools that convey emotion between tabletop display platform and user. And this shows various results acting as assistance because becomes master of story of imagination and participate directly on talk and makes change of story. In this paper, we described about oriented electronic book system the future that combines tabletop display and Digi-pet. This system is expected that the usefulness is increased by leaps and bounds along with technology development forward.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.7-16
• /
• 2008

There are unique aspects of truck vehicle movements compared with the personal travel in trip chaining. This paper reports an analysis on the truck vehicle trip chaining which intercity/metropolitan/intraregional trips are classified. Data collected from the travel dairy survey is used the truck trip-chaining analysis. The pattern of trip chaining classes is classified by the GIS mapping based on orgin-destination trip information. The physical index and efficiency index for each trip diary is used to the truck vehicle activity. Truck trips lengths and time differs from its truck type, service type and travel patterns. It is shown that the efficiency of the truck trip chaining depends on vehicle types and its delivery patterns. There are many other topics for research on trip chaining modeling such as the classification of trip chain, time use and mode choice by trip chaining.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.432-443
• /
• 2015

Coherence describing the similarity between physical quantities of two signals is a very useful tool to investigate the temporal and spatial characteristics of signals propagating in underwater acoustic waveguide. Ambient noise measurements were made by the vertical received array consisting of three hydrophones as part of the KIOST-HYU joint acoustics experiment, and the coherence for the underwater ambient noise was analyzed. In this paper, the coherence results in cases that the generator in the research vessel was off and turned on are presented. The coherence estimated in the case of the generator operation mode are compared to the predictions obtained using the theoretical model with the directional density function dominated by vertical components propagating downward from the ship. In the case of the generator switch-off, the results are compared to the model predictions with directional density function including the effects of sea surface noise and long-distance shipping noise.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.42-49
• /
• 1999

In this paper, we proposed a simple measurement method to find the behaviors of the fiber-to-waveguide coupler. The polished fiber blocks and planar waveguides on silicon dioxide were fabricated independently and then optically coupled by physical pressure. Several kinds of polymer with different refractive indices were used for waveguide films. The proposed method makes it possible to measure the center wavelength, bandwidth, extinction ratio, and polarization dependence of the coupler during fabrication procedure. The wavelength sensitivity increased with refractive index of polymer. The symmetric planar waveguide structure and isotropic property of guiding materials reduced polarization dependent property. Insertion loss of the coupler was less than 0.5dB. It is expected that our measurement method is useful for developing various optical devices using evanescent coupling between polished fiber and planar waveguide such as optical modulators and filters etc.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.5-8
• /
• 2013

We have studied Hall effect for potassium (K)-doped $BaFe_2As_2$ superconducting thin films by analyzing the relation between the longitudinal resistivity (${\rho}_{xx}$) and the Hall resistivity (${\rho}_{xy}$). The thin films used in this study were fabricated on $Al_2O_3$ (000l) substrates by using an ex-situ pulsed laser deposition (PLD) technique under a high-vacuum condition of ~$10^{-6}$ Torr. The samples showed the high superconducting transition temperatures ($T_c$) of ~ 40 K. The ${\rho}_{xx}$ and the ${\rho}_{xy}$ for K-doped $BaFe_2As_2$ thin films were measured by using a physical property measurement system (PPMS) with a temperature sweep (T-sweep) mode at an applied current density of $100A/cm^2$ and at magnetic fields from 0 up to 9 T. We report the T-sweep results of the ${\rho}_{xx}$and the ${\rho}_{xy}$ to investigate Hall scaling behavior on the basis of the relation of ${\rho}_{xy}={A{\rho}_{xx}}^{\beta}$. The ${\beta}$ values are $3.0{\pm}0.2$ in the c-axis-oriented K-doped $BaFe_2As_2$ thin films, whereas the thin films with various oriented-directions like a polycrystal showed slightly lower ${\beta}$ than that of c-axis-oriented thin films. Interestingly, the ${\beta}$ value is decreased with increasing magnetic fields.