• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.487-492
• /
• 2009

미래에는 생활환경 주변에 다양한 용도의 대형 디스플레이 장치가 설치되고 사용자들에게 편리한 상호작용적인 서비스를 제공할 것으로 예측된다. 그러나 대형 디스플레이는 그 물리적 크기 때문에 기존의 마우스와 키보드와 같은 장치로는 효과적인 사용자 인터랙션이 쉽지 않다. 최근 이런 대형 디스플레이를 위한 인터랙션 방법에 대해 많은 연구가 수행되고 있다. 본 논문에서는 타일드 디스플레이 기반의 인터랙티브 응용프로그램 개발을 지원하는 iTILE 프레임워크와 이를 활용하여 테이프 스위치와 적외선 카메라 텐저블 인터페이스 입력장치를 사용한 응용프로그램에 대해 기술한다.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.168-176
• /
• 2014

This paper presents an engine oil change warning algorithm based on the test results of a small dip-stick-gage-type engine-oil-deterioration-detection sensor, software to realize the algorithm and a display device to apply the software. The algorithm determines the engine oil deterioration condition from the rate of change in the dielectric constant based on the average measured capacitance at $80^{\circ}C$ after the engine stops. The rate of change in the dielectric constant at the time for oil change correlates with the time that one of recommended warning limits for engine oil physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity is first reached. At this point, a warning signal for oil change appears on the display device like a smart-phone or individual display device. The frames of smartphone app have three stages. The user can directly input all of the thresholds into the frame of the smartphone app. The screen of the display device comprises one frame for each warning signature with the related message. The user can input the thresholds to the device through a USB cable connected to a personal computer.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.

• Journal of Information Display
• /
• 제12권3호
• /
• pp.129-134
• /
• 2011

The universal current reversal method is used for the simultaneous measurement of response time (${\tau}$), azimuthal angle (${\varphi}_o$), spontaneous polarization ($P_S$), and rotational viscosity (${\gamma}_{\varphi}$) of two ferroelectric liquid crystals (FLCs). The application of AC field in FLCs results in reorientational current, which is further analyzed to obtain various parameters. The variation in the parameters with temperature follows the typical trend predicted by the theory. The theoretical curve fits well into the experimental data. Its comparison with traditional current reversal method is confirmed to address certain limitations of that method.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
• /
• pp.81-85
• /
• 2004

It became new social interest for children to have their own appropriate physical, mental, social environment as one independent identity, In these social atmosphere, new design method and standard of children's residence, education, playing environment which can fill their desire. When home and school are the first places to meet the world and learn, museum and science hall are the representing places to provide education and entertainment, especially to preschoolers, they are the prior education system. it is the most important these science halls to give children potential familiarity of science rather than direct knowledge. Also these places should be stepping stones of the process of intellectual growth as foundation stones for future science education. On this research i will provide a direction to space planning of children's science hall, extended to children' museum studying display producing of playing conception, the necessary element of children's physical, mental, social behavior development process.

• 반도체디스플레이기술학회지
• /
• 제4권3호
• /
• pp.1-4
• /
• 2005

Silicon oxynitride films were deposited using ammonia as a nitrogen source via PECVD (plasma enhanced chemical vapor deposition) to study the physical properties of the films. Silane and nitrous oxide were used as silicon and oxygen sources, respectively. The composition of the silicon oxynitride films was well controlled by changing the ratios of the sources and confirmed by XPS. The silicon oxynitride films with high oxygen content showed bigger compressive stress and less refractive index, while the values of surface roughness were around 1 nm, irrespective of the variation of the source ratios.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.19-22
• /
• 2020

The thermal evaporation source is used to prepare thin films by physical vapor deposition. Materials of metals, organic materials, were tested and explained for thermal evaporation experiments. The developed effusion cell performance depends on the type of deposition material, the size of the crucible, the performance of the reflector, etc. and the proper conditions were found by producing, comparing and analyzing several sets of effusion cell to quantitatively evaluate the performance of the cell. The effusion cell for thermal evaporation source is used to prepare thin films of Ag, Cu, Mg.

• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.20-25
• /
• 2016

The parallel computer cluster system has been known as the powerful tool to solve a complex physical phenomenon numerically. The numerical analysis of large size of Li-ion battery pack, which has a complex physical phenomenon, requires a large amount of computing time. In this study, the numerical analyses were conducted for comparing the computing efficiency between the single workstation and the parallel cluster system both with multicore CPUs'. The result shows that the parallel cluster system took the time 80 times faster than the single work station for the same battery pack model. The performance of cluster system was increased linearly with more CPU cores being increased.

• 아동학회지
• /
• 제26권4호
• /
• pp.85-100
• /
• 2005

The 299(162 female and 137 male) participants in this study listened to six stories designed to elicit prosocial or self-protective rules. The Aggression Scale is composed of verbal and physical aggression and expression of anger. The Quality of Peer Relationships scale has both positive and negative components. Results showed girls used more appropriate emotional regulation strategies for managing negative emotions and more prosocial motives than boys. In the regression analysis emotional display rules and gender positive strategies accounted for 6%, 9%, and 5% of the variance in verbal aggression, physical aggression and anger expression of anger. Children with prosocial motives for emotional regulation and many strategies showed lower levels of egocentricity and peer rejection.

• 반도체디스플레이기술학회지
• /
• 제12권3호
• /
• pp.7-12
• /
• 2013

Ni-CNT(Carbon Nanotube) composite coatings is were formed by electrodeposition and their physical properties were investigated with variations of CNT content(1, 3, 6. 9 g/L) in the electrolyte solution, while the current density and electroplating time were fixed respectively at $6A/dm^2$ and 90 min.. With increasing CNT content from 1 to 9 g/L, incorporated CNTs into the composite coating were limited from 4.65 wt.% to 7.38 wt.%. Microhardness and contact angle values were increased with increasing CNT content of upto 3 g/L. With increasing the CNT content further, physical properties were degraded due to agglomeration, poor adhesion of CNTs to Ni matrix and thus rough surfaces. Optimum electroplating conditions were found to be the CNT content of 3 g/L, current density of 6 A/dm2 and electroplating time of 90 min.