• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.168-176
• /
• 2014

This paper presents an engine oil change warning algorithm based on the test results of a small dip-stick-gage-type engine-oil-deterioration-detection sensor, software to realize the algorithm and a display device to apply the software. The algorithm determines the engine oil deterioration condition from the rate of change in the dielectric constant based on the average measured capacitance at $80^{\circ}C$ after the engine stops. The rate of change in the dielectric constant at the time for oil change correlates with the time that one of recommended warning limits for engine oil physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity is first reached. At this point, a warning signal for oil change appears on the display device like a smart-phone or individual display device. The frames of smartphone app have three stages. The user can directly input all of the thresholds into the frame of the smartphone app. The screen of the display device comprises one frame for each warning signature with the related message. The user can input the thresholds to the device through a USB cable connected to a personal computer.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.129-134
• /
• 2011

The universal current reversal method is used for the simultaneous measurement of response time (${\tau}$), azimuthal angle (${\varphi}_o$), spontaneous polarization ($P_S$), and rotational viscosity (${\gamma}_{\varphi}$) of two ferroelectric liquid crystals (FLCs). The application of AC field in FLCs results in reorientational current, which is further analyzed to obtain various parameters. The variation in the parameters with temperature follows the typical trend predicted by the theory. The theoretical curve fits well into the experimental data. Its comparison with traditional current reversal method is confirmed to address certain limitations of that method.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.81-85
• /
• 2004

It became new social interest for children to have their own appropriate physical, mental, social environment as one independent identity, In these social atmosphere, new design method and standard of children's residence, education, playing environment which can fill their desire. When home and school are the first places to meet the world and learn, museum and science hall are the representing places to provide education and entertainment, especially to preschoolers, they are the prior education system. it is the most important these science halls to give children potential familiarity of science rather than direct knowledge. Also these places should be stepping stones of the process of intellectual growth as foundation stones for future science education. On this research i will provide a direction to space planning of children's science hall, extended to children' museum studying display producing of playing conception, the necessary element of children's physical, mental, social behavior development process.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.3 s.12
• /
• pp.1-4
• /
• 2005

Silicon oxynitride films were deposited using ammonia as a nitrogen source via PECVD (plasma enhanced chemical vapor deposition) to study the physical properties of the films. Silane and nitrous oxide were used as silicon and oxygen sources, respectively. The composition of the silicon oxynitride films was well controlled by changing the ratios of the sources and confirmed by XPS. The silicon oxynitride films with high oxygen content showed bigger compressive stress and less refractive index, while the values of surface roughness were around 1 nm, irrespective of the variation of the source ratios.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.19-22
• /
• 2020

The thermal evaporation source is used to prepare thin films by physical vapor deposition. Materials of metals, organic materials, were tested and explained for thermal evaporation experiments. The developed effusion cell performance depends on the type of deposition material, the size of the crucible, the performance of the reflector, etc. and the proper conditions were found by producing, comparing and analyzing several sets of effusion cell to quantitatively evaluate the performance of the cell. The effusion cell for thermal evaporation source is used to prepare thin films of Ag, Cu, Mg.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.20-25
• /
• 2016

The parallel computer cluster system has been known as the powerful tool to solve a complex physical phenomenon numerically. The numerical analysis of large size of Li-ion battery pack, which has a complex physical phenomenon, requires a large amount of computing time. In this study, the numerical analyses were conducted for comparing the computing efficiency between the single workstation and the parallel cluster system both with multicore CPUs'. The result shows that the parallel cluster system took the time 80 times faster than the single work station for the same battery pack model. The performance of cluster system was increased linearly with more CPU cores being increased.

• Korean Journal of Child Studies
• /
• v.26 no.4
• /
• pp.85-100
• /
• 2005

The 299(162 female and 137 male) participants in this study listened to six stories designed to elicit prosocial or self-protective rules. The Aggression Scale is composed of verbal and physical aggression and expression of anger. The Quality of Peer Relationships scale has both positive and negative components. Results showed girls used more appropriate emotional regulation strategies for managing negative emotions and more prosocial motives than boys. In the regression analysis emotional display rules and gender positive strategies accounted for 6%, 9%, and 5% of the variance in verbal aggression, physical aggression and anger expression of anger. Children with prosocial motives for emotional regulation and many strategies showed lower levels of egocentricity and peer rejection.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.3
• /
• pp.7-12
• /
• 2013

Ni-CNT(Carbon Nanotube) composite coatings is were formed by electrodeposition and their physical properties were investigated with variations of CNT content(1, 3, 6. 9 g/L) in the electrolyte solution, while the current density and electroplating time were fixed respectively at $6A/dm^2$ and 90 min.. With increasing CNT content from 1 to 9 g/L, incorporated CNTs into the composite coating were limited from 4.65 wt.% to 7.38 wt.%. Microhardness and contact angle values were increased with increasing CNT content of upto 3 g/L. With increasing the CNT content further, physical properties were degraded due to agglomeration, poor adhesion of CNTs to Ni matrix and thus rough surfaces. Optimum electroplating conditions were found to be the CNT content of 3 g/L, current density of 6 A/dm2 and electroplating time of 90 min.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.145-149
• /
• 2012

Liquid crystals are useful for a wide range of applications due to their exceptional properties. Doping of liquid crystals with carbon nanotubes (CNTs), even at very low concentrations, produces a detectable effect on the liquid crystal (LC) properties that can be very attractive for various functions. In this study, an attempt was made to investigate the effect of CNTs on the electrical properties of a short-pitch and high-spontaneous-polarization ferro-electric LC mixture, FLC-6304, at different temperatures. The inclusion of the CNTs significantly reduced the polarization at temperatures well within the $SmC^*$ phase, but the effect was gradually reversed as the transition temperature was approached. The insertion of the CNTs also reduced the response time and the rotational viscosity of the FLC mixture, which is highly desirable in the LCD industry.