• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.5-10
• /
• 2016

Purpose - This paper analyzed the accident of drone and related insurance goods which can be coverable with regard to drone accident. The study range is limited in the owner's care, custody, and the control of drone in South Korea, but military area and law and regulation of the drone would be exceptional. Research design, data, and methodology - With regard to drone's flight, drone can make possible risks and can give severe damage to the people. To carry out this research, literature survey and review such as journal, thesis and publications were adopted. Results - As for the insurance coverage from drone's accident involved in the purpose of business, insurance coverage depends on 'commercial general liability insurance'. However, in case of personal hobby including leasure intention, insurance coverage depends on 'living liability insurance'. Conclusions - From a drone's accident, operator and owner of the drone may face the property damage to the drone itself, and then can give severe damage or loss to the people such as physical injuries and property damage. Peoples should be concerned about having the awareness of drone's accident with insurance coverage.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.6-10
• /
• 2019

This paper describes effectiveness of accident reduction on vehicles equipped with AEB using accident data occurring in Korea. During the statistical period, we used the number of vehicles which are covered by auto insurance and the number of accidents. To maximize the reduction effect of accidents caused by the driver's carelessness, the analysis was limited to Physical Damage Coverage that covers the cost of repairing or replacing the damaged vehicle caused by the driver's fault. Due to Personal Information Protection Law, it was not capable of comparing the same vehicle using Vehicle Identification Number in this study. Instead of that, we used it as a similar vehicle, so there are limits to the comparison and analysis results. As a result of this study, we have found that the effect of reducing accidents was different depending on the vehicle class, but it was generally concluded that the number of accidents decreased when the vehicle was equipped with an AEB system. Domestic research on the AEB effect of reducing accidents is not active yet. Therefore, it is absolutely essential to analyze the effects according to various conditions such as driver's age, occupation and gender as well as expanding the study models in the future.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.321-326
• /
• 2014

BACKGROUND: Recently, weather disasters such as hail and typhoon occur frequently. These threaten the stable cultivation of potatoes. It is very important to cultivate potatoes with stable under unexpected weather disasters. This study was performed to investigate the correlation between mophological characteristics of potato stem and its resistance to hail damage in different potato cultivars. METHODS AND RESULTS: Hail fall occurred for 8 minutes on May 31, 2012 in the field of Highland Agriculture Research Center located in Jinbu-myeon Gangwon-do. Potato crop grown in the field was affected by hail due to which the stems of potato were broken. The percentage of broken stem of potato was investigated as the level of damage by hail. To determine the difference in the ratio of broken stem among the potato cultivars, physical characteristics of potato stem such as diameter and hardness were measured. To evaluate recovery phase after hail damage, ground coverage and yield were measured. The percentage of broken stem of cv. Goun and cv. Saebong were 30%, 26%, respectively, whereas it was 5% in the cv. Atlantic. Damage by hail was the lowest in cv. Atlantic. Diameter of the stem was 15 mm in cv. Atlantic, 13 mm in cv. Goun and 11 mm in cv. Saebong. The hardness of potato cultivars was measured which was 74 N in cv. Atlantic. 71 N in cv. Goun and 59 N in cv. Saebong. The ground coverage in cv. Atlantic was 79%, which was the highest followed by 73% in cv. Saebong and 56% in cv. Goun. The yield of cv. Atlantic was monitored at 90 days after planting which was 40 MT/ha and that of cv. Saebong was 36 MT/ha, whereas in cv. Goun, it was 30 MT/ha which was the lowest. CONCLUSION: The ratio of broken stem in cv. Atlantic was the lowest compared to cultivars. In the physical characteristics of stem, cv. Atlantic was the highest in value of diameter and hardness. Based on these results, it was considered that cv. Atlantic was resistant to hail damage compared to other cultivars.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.797-819
• /
• 2019

Internet of Things (IoT) is the paradigm of network of Internet-connected things as objects that constantly sense the physical world and share the data for further processing. At the core of IoT lies the early technology of radio frequency identification (RFID), which provides accurate location tracking of real-world objects. With its small size and convenience, RFID tags can be attached to everyday items such as books, clothes, furniture and the like as well as to animals, plants, and even humans. This phenomenon is the beginning of new applications and services for the industry and consumer market. IoT is regarded as a fourth industrial revolution because of its massive coverage of services around the world from smart homes to artificial intelligence-enabled smart driving cars, Internet-enabled medical equipment, etc. It is estimated that there will be several dozens of billions of IoT devices ready and operating until 2020 around the world. Despite the growing statistics, however, IoT has security vulnerabilities that must be addressed appropriately to avoid causing damage in the future. As such, we mention some fields of study as a future topic at the end of the survey. Consequently, in this comprehensive survey of IoT, we will cover the architecture of IoT with various layered models, security characteristics, potential applications, and related supporting technologies of IoT such as 5G, MEC, cloud, WSN, etc., including the economic perspective of IoT and its future directions.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.510-518
• /
• 2014

Conflicts between humans and wild boars (Sus scrofa) have increased because of causing crop damage and appearing in downtown. Management to reduce population size has mostly been implemented on pests, but knowledges about ecological values are very rare. Rubbing trees by wild boar was investigated to figure out characteristics and for management ecologically from July to October 2013 in a mixed forest, Geochang, Gyeongnam Province, Korea. Pinus rigida was most frequently founded, and rubbing trees, both conifers and deciduous, were mainly located in 200~600 m above sea level. DBH was no significant difference between rubbing and control trees. The use intensity of conifers was higher than that of deciduous. The coverage of foliage layers and the number of woody plants within a radius of 2.5 m of trees (rubbing and control) were also investigated and compared to determine ecological characteristics. There were 1,332 individuals founded from 25 families. In the coverage of foliage layers, the understory and midstory showed statistically significant, but not in the subover and overstory. The number of Shrubs and saplings are higher in rubbing trees than those of control, but no difference in stems. Total individuals, the number of species, species diversity index(H') within a radius 2.5 m is considerably higher in rubbing trees with high intensity than those of low intensity and control. Our results show that wild boar mainly selected and used conifers more frequently as rubbing trees. Wild boar also modified the physical environments around rubbing trees. Consequently, the positive effects such as species diversity is increase. Thus the conservation policies is required after the intensive population reduction every 3-4 years for forest ecological management rather than annual sustainable hunting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.

• Journal of the Society of Disaster Information
• /
• v.2 no.1
• /
• pp.139-155
• /
• 2006

Over the past two decades suicide terrorism has become an ever-widening phenomenon. When suicide terrorism was first introduced in the Middle East it seemed that this new phenomenon was invincible and that it might change the innate imbalance between terror groups and their rivalry governments. This did not in fact occur. Looking at history of terrorism, it can be seen that suicide attacks are in actuality a very old modus operandi. However, contemporary suicide terrorism differs from such historical tactics, just as the whole phenomenon of terrorism differs from ancient modes of warfare. Modern suicide terrorism is aimed at causing devastating physical damage. through which it inflicts profound fear and anxiety. Its goal is to produce a negative psychological effect on an entire population rather than just the victims of the actual attack. The relatively high number of casualties guaranteed in such attacks, which are usually carried out in crowded areas, ensures full media coverage. Thus, suicide terrorism, ranks with other spectacular modus operandi such as blowing up airplanes in mid air or the use of Weapons of Mass Destruction as a sure means to win maximum effect. For the purposes of this paper a suicide terror attack is defined as a politically motivated violent attack perpetrated by a self-aware individual (or individuals) who actively and purposely causes his own death through blowing himself up along with his chosen target. The perpetrator's ensured death is a precondition for the success of his mission. The greatest potential risk suicide terrorism may pose in future is if terrorists carry out operations combined with other spectacular tactics such as blowing up airplanes or the use of Weapons of Mass Destruction. Such a combination will increase immensely the death toll of a single terror attack and will have a shocking psychological effect on public moral. At this level suicide terrorism would constitute a genuine strategic threat and would probably be confronted as such. This study portrays a general overview of the modern history of suicide terror activity worldwide, focusing on its main characteristics and the various aims and motivations of the terror groups involved. In addition, This study provides an overview what is to be done to prevent such terrorist attacks.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.53-67
• /
• 2014

Numerical modeling is commonly used to reproduce the physical phenomena of dam-break and to compile resulting flood hazard maps. The accuracy of a dam-break model depends on the physical structure that describes the volume of storage, breach formation and progress, input variables, and model parameters. Model input and parameters are subjective in that they are prescribed; hence, caution is needed when interpreting the results. This study focuses on three parameters (breach degree ${\theta}$, shape factor P, and collapse rate k) used when the dam-break model is coupled with FLO-2D (a two-dimensional flood simulation model) to estimate flood coverage and depth etc. The results show that the simulation is sensitive to the shape factor P and the collapse rate k but not to the breach degree ${\theta}$. This study will contribute to reducing flood damage from dam-break disasters in the future.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.