• 유통과학연구
• /
• 제14권3호
• /
• pp.5-10
• /
• 2016

Purpose - This paper analyzed the accident of drone and related insurance goods which can be coverable with regard to drone accident. The study range is limited in the owner's care, custody, and the control of drone in South Korea, but military area and law and regulation of the drone would be exceptional. Research design, data, and methodology - With regard to drone's flight, drone can make possible risks and can give severe damage to the people. To carry out this research, literature survey and review such as journal, thesis and publications were adopted. Results - As for the insurance coverage from drone's accident involved in the purpose of business, insurance coverage depends on 'commercial general liability insurance'. However, in case of personal hobby including leasure intention, insurance coverage depends on 'living liability insurance'. Conclusions - From a drone's accident, operator and owner of the drone may face the property damage to the drone itself, and then can give severe damage or loss to the people such as physical injuries and property damage. Peoples should be concerned about having the awareness of drone's accident with insurance coverage.

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.6-10
• /
• 2019

This paper describes effectiveness of accident reduction on vehicles equipped with AEB using accident data occurring in Korea. During the statistical period, we used the number of vehicles which are covered by auto insurance and the number of accidents. To maximize the reduction effect of accidents caused by the driver's carelessness, the analysis was limited to Physical Damage Coverage that covers the cost of repairing or replacing the damaged vehicle caused by the driver's fault. Due to Personal Information Protection Law, it was not capable of comparing the same vehicle using Vehicle Identification Number in this study. Instead of that, we used it as a similar vehicle, so there are limits to the comparison and analysis results. As a result of this study, we have found that the effect of reducing accidents was different depending on the vehicle class, but it was generally concluded that the number of accidents decreased when the vehicle was equipped with an AEB system. Domestic research on the AEB effect of reducing accidents is not active yet. Therefore, it is absolutely essential to analyze the effects according to various conditions such as driver's age, occupation and gender as well as expanding the study models in the future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• 한국환경농학회지
• /
• 제33권4호
• /
• pp.321-326
• /
• 2014

최근 기상재해가 빈번하게 발생하고 있다. 우박이나 태풍은 감자의 안정적이 재배에 위협적인 요인이다. 이렇듯 돌발적인 기상재해에 감자를 안정적으로 재배하는 것은 중요하다. 따라서 본 연구는 감자품종별 감자 줄기 특성이 우박에 대한 저항성은 어떠한 관계가 있는지 구명하기 위하여 수행되었다. 부러진 줄기의 비율에서 '대서' 품종은 5%, '고운' 품종은 30%, '새봉' 품종은 26%였다. '대서' 품종은 다른 품종에 비하여 우박에 의한 피해가 가장 적었다. 줄기의 물리적 특성을 측정한 결과 '대서' 품종이 높았다. '대서' 품종의 줄기의 직경은 15mm, '고운' 품종은 13mm, '새봉' 품종은 11 mm 이었다. '대서' 품종의 줄기 경도는 평균 74 N, '고운'품종은 71 N, '새봉' 품종은 59 N 이었다. 우박 피해 당시 토양피복도는 '대서' 품종이 79%의 피복도로 가장 높았고, '고운' 품종은 56% 정도로 가장 적었다, '새봉' 품종은 73%였다. 파종 후 90일째 조사한 수량성은 '대서'가 40 MT/ha '고운'은 30 MT/ha '새봉'은 36 MT/ha이었다.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.797-819
• /
• 2019

Internet of Things (IoT) is the paradigm of network of Internet-connected things as objects that constantly sense the physical world and share the data for further processing. At the core of IoT lies the early technology of radio frequency identification (RFID), which provides accurate location tracking of real-world objects. With its small size and convenience, RFID tags can be attached to everyday items such as books, clothes, furniture and the like as well as to animals, plants, and even humans. This phenomenon is the beginning of new applications and services for the industry and consumer market. IoT is regarded as a fourth industrial revolution because of its massive coverage of services around the world from smart homes to artificial intelligence-enabled smart driving cars, Internet-enabled medical equipment, etc. It is estimated that there will be several dozens of billions of IoT devices ready and operating until 2020 around the world. Despite the growing statistics, however, IoT has security vulnerabilities that must be addressed appropriately to avoid causing damage in the future. As such, we mention some fields of study as a future topic at the end of the survey. Consequently, in this comprehensive survey of IoT, we will cover the architecture of IoT with various layered models, security characteristics, potential applications, and related supporting technologies of IoT such as 5G, MEC, cloud, WSN, etc., including the economic perspective of IoT and its future directions.

• 한국산림과학회지
• /
• 제103권3호
• /
• pp.510-518
• /
• 2014

멧돼지는 농작물 피해, 도심 출몰 등으로 인해 인간과 갈등이 증가하고 있다. 유해야생동물에 대하여 주로 개체수 감소에 대한 노력이 진행되며, 생태적 가치에 대한 연구는 미미하다. 따라서 본 연구는 멧돼지의 비빔목 선택 및 생태학적 역할을 알아보기 위해 2013년 7월부터 10월까지 경남 거창군내 혼효림에서 실시되었다. 멧돼지 비빔목은 리기다소나무(Pinus rigida)가 가장 많이 발견되었으며, 침엽수와 활엽수 모두 해발 200~600 m에서 가장 많이 발견되었다. 흉고직경(DBH)에 있어 비빔목과 대조구 사이 유의한 차이가 나타나지 않았으며, 활엽수보다는 침엽수가 이용강도가 높은 것으로 나타났다. 비빔목 생태학적 특성을 파악하기 위해 반경 2.5 m 이내의 목본식물과 피도량을 대조구와 비교하였다. 총 25과 1,332종의 목본식물이 발견되었다. 각 층별 피도량에서 하층피도량과 중층피도량에서 나무 그룹별 통계적 유의성이 나타났고, 중상층과 상층에서는 나타나지 않았다. 또한 관목과 치수의 수에서 그룹별 유의한 차이가 나타났으며, 교목의 수에서는 나타나지 않았다. 총 개체수, 종수, 종다양도지수(H')에서는 모두 통계적 유의성이 나타났으며, 이용강도가 높은 비빔목에서 가장 높게 나타났다. 따라서 멧돼지는 주로 침엽수를 비빔목으로 선택하며, 이용강도가 높은 비빔목에서는 피도량 등 물리적 환경을 변화시켜 종다양도를 증가시키는 등 여러 가지 긍정적 영향을 끼치는 것으로 나타났다. 멧돼지의 산림생태학적 관리를 위해서는 매년 지속적인 포획보다는 3-4년을 주기로 강도 높은 개체수 감소 후 보전 정책이 필요할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.

• 한국재난정보학회 논문집
• /
• 제2권1호
• /
• pp.139-155
• /
• 2006

Over the past two decades suicide terrorism has become an ever-widening phenomenon. When suicide terrorism was first introduced in the Middle East it seemed that this new phenomenon was invincible and that it might change the innate imbalance between terror groups and their rivalry governments. This did not in fact occur. Looking at history of terrorism, it can be seen that suicide attacks are in actuality a very old modus operandi. However, contemporary suicide terrorism differs from such historical tactics, just as the whole phenomenon of terrorism differs from ancient modes of warfare. Modern suicide terrorism is aimed at causing devastating physical damage. through which it inflicts profound fear and anxiety. Its goal is to produce a negative psychological effect on an entire population rather than just the victims of the actual attack. The relatively high number of casualties guaranteed in such attacks, which are usually carried out in crowded areas, ensures full media coverage. Thus, suicide terrorism, ranks with other spectacular modus operandi such as blowing up airplanes in mid air or the use of Weapons of Mass Destruction as a sure means to win maximum effect. For the purposes of this paper a suicide terror attack is defined as a politically motivated violent attack perpetrated by a self-aware individual (or individuals) who actively and purposely causes his own death through blowing himself up along with his chosen target. The perpetrator's ensured death is a precondition for the success of his mission. The greatest potential risk suicide terrorism may pose in future is if terrorists carry out operations combined with other spectacular tactics such as blowing up airplanes or the use of Weapons of Mass Destruction. Such a combination will increase immensely the death toll of a single terror attack and will have a shocking psychological effect on public moral. At this level suicide terrorism would constitute a genuine strategic threat and would probably be confronted as such. This study portrays a general overview of the modern history of suicide terror activity worldwide, focusing on its main characteristics and the various aims and motivations of the terror groups involved. In addition, This study provides an overview what is to be done to prevent such terrorist attacks.

• 지질공학
• /
• 제24권1호
• /
• pp.53-67
• /
• 2014

댐붕괴로 인하여 빚어지는 홍수위험지도 작성에서 물리적 현상을 재현해내기 위하여 수치모형이 사용되는 것이 일반적이다. 이때 모형의 정확도는 저수지의 수량과 댐붕괴 형성 및 진행을 포함한 모형의 물리적 구조, 입력인자 및 매개변수의 신뢰도에 의하여 결정되기 마련이다. 특히 입력인자 및 매개변수는 모형을 이용하기 이전에 미리 결정하여 입력하게 되며 사용자의 판단과 주관에 의지하므로 주의가 요구된다. 이 연구에서는 댐붕괴 모형을 FLO-2D와 연동하여 홍수 침수모의를 실시할 때에 댐붕괴 모형에서 세 개의 매개변수(붕괴각도 ${\theta}$, 저수지 형상계수 P, 붕괴율 k가 FLO-2D의 침수모의(침수범위, 침수깊이 등)에 어떻게 영향을 미치는 가를 살펴보았다. 붕괴각도 ${\theta}$는 FLO-2D의 침수모의에 있어 낮은 영향을 미치나 저수지 형상계수 P와 붕괴율 k는 중대한 영향을 미치는 것으로 나타났다. 이 연구는 향후 댐붕괴에 의한 홍수 위험의 피해를 저감하는데 기여할 것이다.

• 헤리티지:역사와 과학
• /
• 제53권4호
• /
• pp.78-99
• /
• 2020

천안 성불사 마애불은 16나한이 모두 남아있는 국내의 유일한 예로 학술적 가치가 아주 높으나 심하게 손상되어 있어, 보존 방안을 검토하기 위해 디지털 기록화와 정밀 진단을 바탕으로 안정성을 평가하였다. 이 결과, 삼존불은 비슷한 규모이나 나한상은 매우 다양한 크기를 보였으며, 권속 2구는 나한상에 비해 크다. 추정공양상은 나한상과 유사하며, 대부분의 존상은 형상과 제작기법이 잘 드러난다. 마애불이 새겨진 암반은 편리 구조가 뚜렷한 호상편마암으로, 석영과 장석으로 이루어진 우백대와 흑운모로 구성된 우흑대가 교호하며 미량의 백운모를 포함한다. 이 마애불에는 물리적 풍화와 변색 및 생물 오염이 복합적으로 작용하고 있으며, 주암면에는 미세 균열 1,131cm, 박리상 균열 1,061cm, 구조상 균열 1,456cm, 절리 1,277cm로 나타났다. 손상도 평가 결과, 절리 3.6(균열지수), 박리 5.2%, 박락 1.7%, 탈락 0.1%로 산출되었다. 특히 생물학적 풍화가 심하여 주암면의 생물피도는 9단계와 10단계가 전체 면적의 57.5%를 차지하였고, 5~8단계도 22.3%로 아주 높았다. 표면 변색 요인은 Fe과 Ca 및 S로 암갈색과 백색으로 나타나고 흑화 오염물에서는 다량의 C가 검출되며, 모든 영역에서 손상 가중치가 매우 높다. 마애불 암반에서는 서로 다른 방향을 갖는 불연속면이 확인되었다. 암반의 파괴유형 분석 결과, 평면 파괴와 전도 파괴의 가능성이 있으며 쐐기 파괴는 발생하기 어려운 것으로 나타났다. 주암면의 초음파 속도는 평균 2,463m/s이며, 절리대가 많은 좌측면 하부가 상대적으로 낮아 상당히 풍화된 단계(HW)와 완전히 풍화된 단계(CW)가 집중 분포하는 취약한 물성을 보였다. 이 마애불에서는 미세 균열의 14.9%와 박리상 균열의 58.9% 정도에서 보존처리가 요구된다. 또한 마애불의 보존 환경을 개선할 수 있는 수목 정비와 암반의 구배를 고려한 배수 시설 및 지반 정비가 필요하며, 장기적인 보존 관리를 위해 보호 시설도 검토해야 할 것이다.