• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.280-292
• /
• 2017

Hail is not a frequently occurring weather event, and there are even fewer reports of hail damages to forest stands. Since the 2000s, an increase in hail incidence has been documented in Europe and the United States. In Korea, severe hails occurred in Jeollanam-do province on May 31 and in Gyeongsangbuk-do province on June 1, 2017. Hail size was ranged from 0.5 to 5.0 cm in diameter in Jeollanam-do, and from 1.5 to 3.0 cm in Gyeongsangbuk-do. This study was aimed to analyze the hail damages to forests by species and topography based on damage-categorized maps created by using drones and aerial photographs, and to analyze relationships of the damages with meteorological factors. The total damaged forest area was 1,163.1ha in Jeollanam-do, and 2,942.3ha in Gyeongsangbuk-do. Among the 'severe' damaged area 326.7ha, 91% was distributed in Jeollanam-do, and concentrated in the city of Hwasun which covers 57.2% of the total 'severe' damaged area. The most heavily damaged species was Korean red pine(Pinus densiflora S. & Z.) followed by P. rigida. Most broad-leaved trees species including oaks were recovered without any dead trees found. Liliodendron tulipifera was the most severely damaged in terms of the rate of 'severe' degree individuals which are needed to be checked whether they will die or be recovered. Cause of the death of pines was considered as the combination of physical damage caused by the hail and long-lasting drought with high air temperature that occurred before and after the hail event. No pathogens and insects were found which might have affected to tree deaths. We suggested a dieback mechanism of the pine trees damaged by hail and drought.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.517-528
• /
• 2011

Indiscreet developments cause environmental problems in major cities of Seoul Metropolitan Area. Among the environmental problems, the air pollution leads the citizens' physical and economic damages. Therefore, it needs to predict how much air pollutant which is emitted from human activities can be carried by urban environment, then to examine the reasonable level of urban development This study assumed that the air pollution is represented differently by the amount of emission. With the assumption, the acceptable air pollutant emission which keeps the air quality under the environmental standard is estimated, then the proper population is calculated in the case of Gwacheon, Gyeonggi. The result is as follow: First, air pollution concentrations of CO, $NO_2$, $SO_2$ which are estimated by using IDW interpolation of GIS don't excess the air environmental standard. Second, the result of correlation analysis between air pollutant emission and air pollution concentration shows that CO and $NO_2$ has high correlationship with total source of pollution and linear source of pollution, and $SO_2$ with linear source of pollution. Third, the results of regression analysis show that the acceptable population is bigger that the real population in the case of CO, and with the estimation of $NO_2$ and $SO_2$, the current population in the urban center and boundaries where the residential and commerce land uses are concentrated is bigger than the acceptable population. The consequence of this study is that the estimation of carrying capacity can suggest the acceptable human activities which keep the air quality under the environmental standard. This can leads the sustainable urban development by control the human activities under the carrying capacity of urban environment.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.33-41
• /
• 2001

Enormous volumes of mining wastes from the abandoned and closed mines are disposed without a proper treatment in the upper Okdong River basin at Southeastern part of Kangwon Province. Erosion of these wastes contaminates soil, surface water, and sediments with heavy metals. Objectives of this research were to fractionate heavy metals in the mine tailing stored in the Sangdong Tungsten tailing dams and to assess the potential pollution index of each metal fraction. Tailing samples were collected from tailing dams at different depth and analyzed for physical and chemical properties. pH of tailings ranged from 7.3 to 7.9. Contents of total N and organic matter were in the ranges of 3.2~5.5%, and 1.3~9.1%, respectively. Heavy metals in the tailings were higher in the newly constructed tailing dam than those in the old dam. Total concentrations of metals in the tailings were in the orders of Zn > Cu > Pb > Ni > Cd, exceeded the corrective action level of the Soil Environment Conservation Law and higher than the natural abundance levels reported from uncontaminated soils. Relative distribution of heavy metal fractions was residual > organic > reducible > carbonate > adsorbed, reversing the degree of metal bioavailability. Mobile fractions of metals were relatively small compared to the total concentrations. Distribution of metals in the tailing dam profiles was metal specific. Concentrations of Cu at the surface of tailing dams were higher than those at the bottom. Pollution index (PI) values of each fraction of metals were ranged from 4.27 to 8.51 based on total concentrations. PI values of mobile fractions were lower than those of immobile fractions. Results on metal fractions and PI values of the tailing samples indicate that tailing samples were contaminated with heavy metals and had potential to cause a detrimental effects on soil and water environment in the lower part of the stream. A prompt countermeasure to prevent surface of tailings in the dams from water and wind erosions is urgently needed.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.3-55
• /
• 2009

Records of architectural cultural properties, in case of accidents, show who are to blame, present what evidences are to establish the cause, and also are used for checking if there were any problem in policies and regulations in preserving and caring architectural cultural properties. These records are of great importance in their roles and are of essential use regardless of time and space. Considering its significance, In that architectural cultural properties requires setting clear goals and directions and as well, criteria, for management, we need methods of systematical control and consideration for its characteristics. This research started with the sense of purpose that managing architectural cultural properties are in need of systematic and concrete control, based on the perception that they need protecting and transmitting. The goal of this thesis is to work on the current archiving status of architectural cultural properties by monitoring patterns and processes in archival administration, to diagnose problems by looking into the records creation and management, and to present the improvement plan which would lead to the architectural cultural properties' more efficient management and better use in the future. The management of architectural cultural properties begins with registering and assigning. Cultural Heritage Administration is in charge of control, supervision, and budget and local governments deal with direct management. Accordingly, records are by the hands of each local governmental body. Currently, each cultural property has its management depending on every different working environment in each governmental body. Architectural cultural properties needs managing in one body through the synthetic and unified, concrete and systematic manual and guide for management. Archiving architectural cultural properties have need of unitive management through a professional system, considering the physical characteristics and history of archiving. Unified management system will enhance efficiency and actual use of architectural cultural property records if one governmental body undertakes uniting records through standardization and professional supervision, and data-based unified search engine would enhance efficiency and actual use. Therefore, I suggest that Archives for Architectural Cultural Properties should be established as a professional Archives and wholly responsible body for the purpose of systematically and unifiedly managing architectural cultural property records with professional personnel and facility and transmitting their historical, cultural, and academic value. In Korea, studies up to the present have mainly focused on managing architectural records and records of drawing while few efforts were made to directly deal with managing architectural cultural properties themselves. The focus of this thesis is to study the current status and establish problems of the management of architectural cultural properties in administrative process, and as a result, to propose to establish Archives for Architectural Cultural Properties as a professional archives.

• Journal of Korean Philosophical Society
• /
• no.96
• /
• pp.39-70
• /
• 2012

In order to locate Kant's concept of the highest good within ethics and the theory of moral religion, it needs to be approached with some qualifications: there are two rough ways to be suggested. The first way is to focus on the concept of the highest good that is explained in terms of the happiness in proportion to a rational being's virtue or to his/her worthiness to be happy. But the happiness determined in the sense outlined above would be (increasingly or decreasingly) changeable according to each one's individual morality-this is what is meant by each one's 'worthiness' here-, and would not be seen as the perfect one. It might even be said that this kind of happiness is possible in a sensible world generally taken, if the existence of God thought of as harmonizing natural phenomena and the moral order is successfully presupposed. The other way is to understand the concept of the highest good literally: in this view, the highest good shows that a rational being's character is completely appropriate to the moral law and for him/her, its corresponding idea, i.e., the perfect happiness, is considered with full justification. But the highest good in the sense sketched above-along with the existence of God and the immortality of the soul-is expected to be realized only in an intelligible world generally taken. This means that it should be appraised as an ideal of the highest good that includes the so-called 'physical happiness' specified in terms of the first way as its element. In this regard, it is seen to be somewhat restricted. Between the two concepts of the highest good already touched upon, the highest good of the possible world would be the one established in terms of the first way. In other words, it is not the highest good in an intelligible world, but the highest good in this world. Of course, it is true that we cannot help but assume the existence of God-a being as higher, as moral, as most holy, and as omnipotent-in order to explain the highest good in this world (namely, in order to establish the possibility of the combination of the happiness and the worthiness). For as long as both morally good acts and the happiness are considered to happen in a natural world, the cause of the nature (i.e., the existence of its creator), that is, God, must be able to be presupposed. In this vein, Kant interprets that most people view that the key of the Bible is to show that the best world which is characterized by an intelligible or heavenly kingdom is also actually feasible in this world. The wish of the people who have the morally good character is that God's kingdom comes and his will is properly achieved in this world. But we cannot know what God really does in order to realize his world in this world. Nonetheless, we are fully aware of what we should do in order to make ourselves a member of his world. It is specified like this: we should do our ethical duties and further proceed to establish an ethical community. Viewed this manner, it is concluded that an ethical community is not a merely ideal thing like the kingdom of the ends, but a human apparatus or institution that exists in this world.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.658-673
• /
• 2018

Social conflicts with extremely low frequency magnetic field(ELF-MF) exposures are expected to exacerbate due to continued increase in electric power demand and construction of high voltage transmission lines(HVTL). However, in current environmental impact assessment(EIA) act, specific guidelines have not been included concretely about EIA of ELF-MF. Therefore, this study conducted a standardization study on EIA method through case analysis, field measurement, and expert consultation of the EIA for the ELF-MF near HVTL which is the main cause of exposures. The status of the EIA of the ELF-MF and the problem to be improved are derived and the EIA method which can solve it is suggested. The main contents of the study is that the physical characteristics of the ELF-MF affected by distance and powerload should be considered at all stages of EIA(survey of the current situation - Prediction of the impacts - preparation of mitigation plan ? post EIA planning). Based on this study, we also suggested the 'Measurement method for extremely low frequency magnetic field on transmission line' and 'Table for extremely low frequency magnetic field measurement record on transmission line'. The results of this study can be applied to the EIA that minimizes the damage and conflict to the construction of transmission line and derives rational measures at the present time when the human hazard to long term exposure of the ELF-MF is unclear.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.82-98
• /
• 2019

The importance of spatial information is rapidly rising. In particular, 3D spatial information construction and modeling for Real World Objects, such as smart cities and digital twins, has become an important core technology. The constructed 3D spatial information is used in various fields such as land management, landscape analysis, environment and welfare service. Three-dimensional modeling with image has the hig visibility and reality of objects by generating texturing. However, some texturing might have occlusion area inevitably generated due to physical deposits such as roadside trees, adjacent objects, vehicles, banners, etc. at the time of acquiring image Such occlusion area is a major cause of the deterioration of reality and accuracy of the constructed 3D modeling. Various studies have been conducted to solve the occlusion area. Recently the researches of deep learning algorithm have been conducted for detecting and resolving the occlusion area. For deep learning algorithm, sufficient training data is required, and the collected training data quality directly affects the performance and the result of the deep learning. Therefore, this study analyzed the ability of detecting the occlusion area of the image using various image quality to verify the performance and the result of deep learning according to the quality of the learning data. An image containing an object that causes occlusion is generated for each artificial and quantified image quality and applied to the implemented deep learning algorithm. The study found that the image quality for adjusting brightness was lower at 0.56 detection ratio for brighter images and that the image quality for pixel size and artificial noise control decreased rapidly from images adjusted from the main image to the middle level. In the F-measure performance evaluation method, the change in noise-controlled image resolution was the highest at 0.53 points. The ability to detect occlusion zones by image quality will be used as a valuable criterion for actual application of deep learning in the future. In the acquiring image, it is expected to contribute a lot to the practical application of deep learning by providing a certain level of image acquisition.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.1
• /
• pp.92-105
• /
• 2019

Spatial and temporal characteristics of phytoplankton communities around the coastal waters of Jeju Island were investigated with environmental factors such as water temperature, salinity, and dissolved oxygen. Monthly samples were collected at 0 and 30 m depths of 10 stations from March 2015 to February 2016. During the survey period, water temperature ranged in 13.7~25.9 and $13.6{\sim}20.8^{\circ}C$ at 0 and 30 m, salinity in 31.51~34.47 and 33.03~34.47 psu at 0 and 30 m, and dissolved oxygen in 6.12~8.10 and $5.73{\sim}7.88mg\;L^{-1}$ at 0 and 30 m, respectively. Chlorophyll-a ranged in 0.28~2.48 and $0.44{\sim}1.01{\mu}g\;L^{-1}$ at 0 and 30 m, respectively. Phytoplankton abundance fluctuated in the range of $5,300{\sim}639,900cells\;L^{-1}$ during the year, showing the lowest in February at all stations, and the highest in July at the northern and western sea as well as in August at the southern and eastern sea of Jeju Island. A total of 362 species were occurred including 181 spp. of Bacillariophyta, 147 spp. of Dinophyta and 34 spp. of other phytoflagellates. Dominant species with occupancy rate over 20 percent of phytoplankton abundance showed apparent seasonal succession such as Paralia sulcata and Skeletonema costatum in spring and autumn, 6 spp. of genus Chaetoceros in summer, and 2 spp. of genus Chaetoceros and Thalassionema frauenfeldii in winter. Monthly abundance in the northern and western sea fluctuated with similar tendency, and the southern and eastern sea also showed similar pattern of monthly abundance variation. Species composition and dominant species succession mentioned above were quite different from previous studies, so some physical changes such as water temperature, salinity and current pattern might cause the changes of phytoplankton assemblages around Jeju Island.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2019

This study was conducted to analyze the conservation status by diagnostical methology for the front wall of Jungjeongdang area of Dodong-Seowon. The study was carried out as photogrammetry and mapping - investigation of materials and conservation status - analysis and evaluation of conservation status. The results are as follows. First, in the case of photogrammetry, each photograph was took in superposition, and the distortions of the photographs were corrected and synthesized. Based on this, actual survey drawings of the wall were prepared. Second, in case of material and conservation status, the wall is in the form of Wapyeondam and the material of the head part are tile, mud and lime, and the material of the body part are mud and tile. The mud was mixed with gravel, sand and straw. At the base part, amorphous natural stones and mud were used. The remarkable damage that appears on the wall is erosion of the base part, and some disintegration appears in the body part. There is a biological patina on the head and the base, and vegetation such as lichen is concentrated on the partial body. There was superficial deposit in the head part, and some tiles were broken or lost. Deep fissures are intensively located in some part of the eastern wall. Third, in the case of analysis and evaluation of the conservation status, it is considered that by the erosion of the foundation part and the disintegration of the body part, there is a possibility that physical damage will continue to be applied to the wall, so immediate action is necessary. The distribution of biological patina and vegetation does not appear to cause great problems in the wall, but it is necessary to reduce it in view of aesthetic problems. A cracked or missing tile would need to be replaced, and deep cracks in the eastern wall appear to have been caused by subsidence, and reinforcement of the underground is necessary to prevent further damage.