• Elastomers and Composites
• /
• 제47권4호
• /
• pp.318-328
• /
• 2012

본 연구에서는 blocked isocyanate와 하이브리드 기술을 이용해서 1액 경화형 폴리우레탄 탄성체를 제조하였다. 1액 경화형 하이브리드 폴리우레탄의 제조를 위해서 hydroxyl group을 포함하는 실리카 하이브리드를 합성하고 입자크기, 형태 및 탄성체 내의 하이브리드 입자분포를 확인하였다. 또한, 열해리특성, 기계적 물성, 성형특성을 조사하였다. 1액 경화형 폴리우레탄 탄성체의 열해리 특성을 평가한 결과 온도가 높을수록, 열처리 시간이 길어질수록 blocking된 isocyanate의 해리가 더 잘 진행되었다. 합성된 실리카 하이브리드는 직경이 23~27 nm이고 구형이었으며 하이브리드 폴리우레탄의 단면을 FE-SEM과 EDS를 사용해서 분석한 결과 하이브리드 입자가 폴리우레탄 분자구조 내에 잘 분산되어있는 것을 확인하였다. 하이브리드 폴리우레탄의 경우에는 하이브리드를 포함하지 않는 폴리우레탄 탄성체에 비해 기계적물성, 내마모성 및 열적특성이 향상되었으며 가소제를 사용하는 경우에는 물성의 변화가 거의 없는 것으로 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

• Journal of the korean society of oceanography
• /
• 제38권4호
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• 패션비즈니스
• /
• 제10권3호
• /
• pp.23-30
• /
• 2006

Various high-touch textile products have been developed recently including ultra-fine denier filament yarn fabrics. The touch or hand of high value-added products is of prime importance. Physical and mechanical properties of fabric specimens, ultra-fine denier filament yarn fabric specimen, 100% wool fabric and wool/polyester 50:50 fabric,were measured using the KES. Compressibility of the ultra-fine denier fabric is recommendable, possibly due to the good bulk property of the specimen. Overall, the THV of the ultra-fine denier fabric is positioned between those of the 100% wool fabric and wool/polyester 50:50 fabric. Observed differences in the physical and mechanical properties explain the fabric specimen characteristics reasonably.

• 멤브레인
• /
• 제27권3호
• /
• pp.255-262
• /
• 2017

본 연구에서는 graphene oxide (GO)를 polyacrylonitrile (PAN)에 첨가하여 전기방사법을 이용해 나노섬유 복합막을 제조한 뒤 물리적 특성을 관찰하였다. GO의 제조는 개선된 Hummer's 방법을 이용하였으며, 표면처리가 되지 않은 GO의 경우 0.5 wt% 이상에서 전기방사가 이루어지지 않았다. GO의 안정성 및 분산도 증가를 개선하기 위해 계면활성제를 이용하여 GO의 표면처리를 하였다. 표면처리가 된 GO를 사용하여 나노섬유 복합막의 GO의 함량을 0.5 wt% 이상 첨가할 수 있었다. 특히, 표면처리가 된 GO가 첨가된 나노섬유 복합막은 향상된 물리적 특성을 가지며, 이는 나노섬유 분리막 내의 GO의 분산도와 상관관계가 있는 것으로 보인다.

• 한국농공학회논문집
• /
• 제52권5호
• /
• pp.53-60
• /
• 2010

The effects of blast furnace slag, hwang-toh, and reinforcing fiber on the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio was varied to 0 %, 25 % and 50 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH, unit mass, and void ratio tests have been performed to study the physical properties of the porous concrete using blast furnace slag coarse aggregates with the polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh, while a series of compressive tests have been performed to evaluate the strength property depending on polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh. The test results indicated that the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates is affected by the replacement ratio of blast furnace slag, and the fiber contents. According to the tests with polyvinyl alcohol fiber contents, the void ratio was decreased and the compressive strength was upgraded.

• 한국표면공학회지
• /
• 제56권5호
• /
• pp.309-319
• /
• 2023

Non-woven fabric is a textile product made by spinning thermoplastic polymers without manufacturing processes such as stretching, doubling, twisting, weaving, and knitting to form a sheet-shaped web in which fibers are tangled with each other, and then combining them by mechanical and physical methods. In addition, the non-woven fabric manufacturing process has various raw material choices, high productivity, so it is a textile manufacturing technology that can have various uses and increase added value. This study was conducted to control the shape and physical properties of products by improving the manufacturing method of melt-blown non-woven fabrics using process technology that easily changes the shape of non-woven fabrics and improves mechanical properties. In particular, it is considered that a non-woven fabric with a thin material shape and improved mechanical properties will be easily applied to a continuous secondary battery manufacturing industry such as roll to roll operation.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.

• 한방재활의학과학회지
• /
• 제19권1호
• /
• pp.169-186
• /
• 2009

Obejectives : The electroacupuncture(EA) on regional fat is often used by oriental medicine doctors in Korea. However, there have been few studies about safety and biocompatibility of its application. Therefore we investigated the safety and change of mechanical character of electroacupuncture after its application on localized fat deposit. Methods : Online surveys were completed from Aug 21 2008 to Aug 28 2008, by email, the online survey data were obtained from nearly 10,002 Korean medical doctors who listed their email address on the website of association of korean oriental medicine. This study includes an experiment on the physical strength and biological property of long needles. We represent each method which were collected in advance survey, then sealed the needles off and did laboratory experiment, which includes surface observation, analysis, vickers hardness test, and also biocompatibility and toxicity test. Results : There was no considerable difference about the physical property after applying electric current, the cell survival rate did not change in comparison with controlled group either. Conclusions : Although it seems there are no considerable acupuncture-related problem, we still need additional studies about clinical effectiveness difference related operation condition. Besides, it will need research on the actual condition, standardization, and criteria about the comsumed needle in Korea.