• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.401-403
• /
• 2016

최근 태양광 발전사업의 투자 수요가 증가하고 있으며, 이에 따른 태양광 발전시스템 (PV시스템)의 신뢰성 및 발전 효율 향상 등을 확보할 수 있는 모니터링 시스템의 중요성이 부각되고 있다. 본 논문에서는 데이터를 앙상블 기법으로 분석하여 알려진 자동 분류 기법과 앙상블 기법을 비교해보고, 이를 바탕으로 PV시스템 고장 예측의 정확도를 향상 시키고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.1-3
• /
• 2020

본 논문은 주파수 분석 방법 중 하나인 Discrete Wavelet Transform (DWT)을 활용하여 태양광 직렬 아크 사고를 검출하는 방법에 관하여 다룬다. DWT 알고리즘은 주파수 도메인에서도 시간 축 정보를 표현할 수 있어 기존의 Fast Fourier Transform (FFT) 주파수 분석 알고리즘과 차이점이 있으며, 대용량 태양광 시스템의 직렬 아크 사고 검출에 최적화 되도록 DWT 알고리즘의 속도를 향상시켜 태양광 DC 아크 사고 안전규격인 UL1699B의 요구 조건을 만족시켰다. DWT 알고리즘의 경우 TMS320F28033 기반으로 구현 되었으며 대용량 PV 시스템 적용을 위해 로고스키코일을 전류 센서로 사용하였다. 또한, 모의 DC 직렬 아크 발생 회로를 구축하여 제작한 사고 검출기의 성능을 실제 아크 발생 조건에서 검증하였다.

• 한국항해항만학회지
• /
• 제35권8호
• /
• pp.631-636
• /
• 2011

등부표의 등명기에 안정적으로 전력을 공급하는 것은 매우 중요하며 전력공급이 안정적이지 못하면 해난 사고를 발생시킨다. 태양광 발전 환경은 해상에서 큰 차이가 있음에도 불구하고, 등부표의 태양광 발전 시스템은 육상의 독립 발전 시스템의 설계 기준에 따라 설계되고 있다. 또한 등부표가 갖는 구조적인 특성을 반영하지 않고 태양광 발전 설비의 용량을 설계하고 있다. 그러므로 해상 환경에 맞지 않는 잘못되 설계로 인하여 발전량이 부족하게 되어 축전지가 과방전하게 된다. 축전지가 과방전하면 등명기에 안정적인 전력을 공급하지 못한다. 본 논문은 태양광 기반의 등부표의 설계 기준을 나타내었다. 3개월 동안 등부표 전력 시스템의 태양광 발전 전력, 소비 전려, 축전지 전압을 측정하였다. 또한 수집한 자료를 바탕으로 해상 등부표 전력운용을 분석하였다. 분석 결과 육상 설계 기준의 태양광 발전 전력과 등부표의 실제태양과 발전 전력이 다르다는 것을 확인하였다. 분석 결과를 바탕으로 등부표의 전력 시스템 설계 기준을 제안한다.

• 신재생에너지
• /
• 제16권4호
• /
• pp.65-75
• /
• 2020

The value of tangible assets depreciates over their useful life and this depreciation should be adequately reflected in any tax or financial reports. However, the method used to calculate depreciation can impact the financial performance of solar projects due to the time value of money. Korean tax law stipulates only one method for calculating the depreciation of solar photovoltaic facilities: the straight-line method. Conversely, USA's tax law accepts other depreciation methods as solar incentives, including the modified accelerated cost recovery system (MACRS) and Bonus depreciation method. This paper compares different depreciation methods in the financial analysis of a 10 MW solar system to determine their effect on the financial results. When depreciation was calculated utilizing the MACRS and Bonus depreciation method, the internal rate of return (IRR) was 10.9% and 16.4% higher, respectively, than when the Korean straight-line depreciation method was used. Additionally, the increased IRR resulting from the use of the two US methods resulted in a 20.5% and 27.4% higher net present value, respectively. This shows that changing the depreciation calculation method can redistribute the tax amount during the project period, thereby increasing the discounted cash flow of the solar project. In addition to increasing profitability, USA's depreciation methods alleviate the uncertainty of solar projects and provide more flexibility in project financing than the Korean method. These results strongly suggest that Korean tax law could greatly benefit from adopting USA's depreciation methods as an effective incentive scheme.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.64-71
• /
• 2014

This study is to perform economic analysis of a PVT-GSHP (Photovoltaic Thermal-Ground Source Heat Pump) system compared to the conventional system which consists of a boiler and a chiller. This research has simulated, developed and analyzed four systems for application in a residential and an office building which was based on the hourly EPI (Energy Performance Index, $kWh/m^2yr$). Case 1 includes a boiler and a chiller to meet heating and cooling demands for a house. Case 2 is the same conventional system as Case 1 for a office. Case 3 is simple summation of Case 1 and 2. And Case 4 is utilizing a PVT-GSHP to meet the combined loads of the house and office. The economic evaluation study was based on IEA ECBCS Annex 54 subtasks C economic assessment methods. This study indicated that PVT-GSHP system can save a building's energy up to 53.9%. Also the SPB (Simple Payback) of the PVT-GSHP system with 0%, 50% initial incentive was 14.5, 6.7 year respectively.

• 한국태양에너지학회 논문집
• /
• 제39권5호
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.498-505
• /
• 2001

본 논문은 PV어레이를 이용한 양수펌프 시스템의 전체적인 제어를 구상하는 제시하였으며, DC/DC 컨버터를 생략하기 위하여 BLDC 모터의 벡터제어를 이용하고 DC량과 AC량과 관계를 찾아내어 인버터만으로 PV 어레이의 최대출력점을 추적하였다. 기존의 최대출력점 제어기는 3상 인버터의 DC 링크단에 나타나는 전류리플로 인하여 제어기가 불안정하게 된다. 따라서 본 연구에서는 제어기의 불안정성을 보완하기 위해 BLDC 모터의 $i_qs$ 전류를 이용한 MPPT(Maximum Power Point Tacker) 제어 알고리즘을 구성하였다. 이러한 제어기의 우수함을 입증하기 위하여 J. A Domfnguez가 비동기모터에 적용한 제어방식을 BLDC 모터에 적용한 결과와 본 논문에서 제시한 제어방식을 시뮬레이션 및 실험을 통하여 비교 검토하고 하였다.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.12-17
• /
• 2008

In this paper, an I-V characteristics of bypass diode has been studied by counting the shading effect in photovoltaic module. The shadow induces hot spot phenomenon in PV module due to the increase of resistance in the current path. Two different types of PV module with and without bypass diode were fabricated to expect maximum output power with an increasing shading rate of 5 % on the solar cell. Temperature distribution is also detected by shading the whole solar cell for the outdoor test. From the result, the bypass diode works properly over 60 % of shading per cell with constant output power. Maximum power generation in case of solar cell being totally shaded with bypass diode decreases 41.3 % compared with the one under STC(Standard Test Condition). On the other hand, the maximum output power of the module without bypass diode gradually decreases by showing hot spot phenomenon with the increase of shading ratio on the cell and finally indicates 95.5 % of power loss compared with the output under STC. Finally the module temperature measured increases around $10^{\circ}C$ higher than that under STC due to hot-spots which come from the condition without bypass diode. It has been therefore one of the main reasons for degrading the PV module and shortening the durability of the PV system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2255-2260
• /
• 2007

This Paper focuses on modeling and simulation to analyze the characteristic of hybrid vehicle. The system includes proton exchange membrane fuel cell(PEMFC), photovoltaic generator(PV), lead-acid battery, motor, vehicle and controller. Main electricity is produced by the PEMFC and battery to meet the requirements of a user load. When vehicle is parked in a sunny place, extra power is generated by the photovotaics and is charged in a battery for next drive. Further we evaluate usefulness of this hybrid vehicle by using ADVISOR - the advanced vehicle simulator written in the Matlab/Simulink environment. According to simulation results, the extra power obtained by photovoltaics which have been explored in nature conditions can help to reduce the electrical load of PEMFC and increase the efficiency (over 30%).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.617-621
• /
• 2001

This paper presents a maximum power point tracking algorithm for Photovoltaic array using only instantaneous output current information. The conventional Hill climbing method of peak power tracking has a disadvantage of oscillations about the maximum power point. To overcome this problem, we have developed a algorithm, that will estimate the duty ratio corresponding to maximum power operation of solar cell. The estimation of the optimal duty ratio involves, finding the duty ratio at which integral value of output current is maximum. For the estimation, we have used the well know Lagrange's interpolation method. This method can track maximum power point quickly even for changing solar insolations and avoids oscillations after reaching the maximum power point.