• Macromolecular Research
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2000

Aromatic diamine monomers containing allylic ester linkage, 1,5-bis(4-aminobenzoate)-1,2,3,4-tetrahydronaphthalene (4-DABTN) and 1,5-bis(3-amin obenzoate)-1,2,3,4-tetrahydronaphthalene (3-DABTN) were synthesized through the reaction of 1,5-dihydroxy-1,2,3,4-tetrahydronaphthalene and 4- or 3-nitrobenzoly chloride. By the reaction of these diamines with pyromellitic dianhydride (PMDA) or 4,4-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), poly(amic acid)s were obtained. The inherent viscosities of the poly(amic acid)s were between 0.55 and 1.31 dL/g. The poly(amic acid)s were converted to polyimides by chemical imidization. The thermogravimetric analysis (TGA) thermograms of these polyimides showed temperatures of 5% weight loss between 323 and 389$^{\circ}C$ in nitrogen atmosphere. The model compound ,1,5-bis (4-nitrobenzoate)-1,2,3,4-tetrahydronaphthalene (4-DNBTN), was decomposed to 4-nitrobenzoic acid and 5-(4-nitrobenzoate)-3,4-dihydronaphthalene upon addition of CF$_3$COOH.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.491-493
• /
• 2002

Erythrodermic actinic reticuloid (EAR) is a photosensitive disorder characterized by dense lymphocytic infiltration in the sun-exposed areas and an increased number of atypical lymphocytes in the peripheral blood. We have reported 2 patients with EAR with circulating atypical lymphocytes and photosensitivity to both ultraviolet (UV) B and A. Although no clonal proliferation of T-cells was observed in the peripheral blood, CD8+ cells were increased in number in an oligoclonal fashion. A number of proliferating CD8+ cells were small, but most cells expressed bcl-2. These findings suggest EAR is a photosensitivity dermatitis characterized by the overspill of oligoclonal CD8+ lymphocytes responsive to UV irradiation.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.385-392
• /
• 2003

Sol-gel preparation technique using a chemical reaction of metal alkoxides has been widely used for the fabrication of various materials including ceramics. However, its mechanism has been studied till now because a number of chemical ways are possible from various alkoxides and additives. In this study, the mechanism of hydrolysis, condensation, and polymerization of alkoxides were investigated from the fabrication of lead-zirconate-titanate (PbZr$\_$x/Ti$\_$l-x/O$_3$; PZT) thin film that is used as various micro-actuator, transducer, and sensor because of its high electro-mechanical coupling factors and thermal stability. Furthermore, the fabrication process and characteristics of self-patternable PZT film using photosensitive stabilizer were studied in order to resolve the problem of physical damage and properties degradation during dry etching for device fabrication. Using an optimum condition to prepare the self-patternable PZT film, more than 5000 ${\AA}$ thick self-patternable PZT film could be fabricated by three times coating. The PZT film showed 28.4 ${\mu}$c/cm$^2$ of remnant polarization (Pr) and 37.0 kV/cm of coercive field (E$\_$c/).

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.88-91
• /
• 1997

The diamondlike (DLC) films were deposited by RF plasma CVD system which had cathode consisting of mesh sheet, for the purpose of a protection from wear of OPC surface of the electrophotographic photosensitive body. Material charateristics and tribological properties of the films were also investigated and finally copying performance was evaluated with DLC deposited OPC samples. The surface resistance of the DLC film unaffected by the surface potential of the OPC was about $10^{11}{\Omega}$ and its hardness was about 1200 kg/$\textrm{mm}^2$. In this case the film showed typical material strcture of dimondlike hydrocarbon. The friction coefficient of the film was lowered to 0.2~0.3 at the optimum condition in this investigation and their wear resistant was inproved by DLC-deposition on the OPC surface. DLC-deposited OPC samples with a good copying performance without image flow and draft could be obtained at some depositing conditions.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.747-749
• /
• 2008

We introduce a pixel-structured scintillator realized on a flexible polymeric substrate and demonstrate its feasibility as an X-ray converter when it is coupled to photosensitive elements. The sample was prepared by filling $Gd_2O_2S:Tb$ scintillation material into a square-pore-shape cavity array fabricated with polyethylene. For comparison, a sample with the conventional continuous geometry was also prepared. Although the pixelated geometry showed X-ray sensitivity of about 58% compared with the conventional geometry, the resolving power was improved by about 70% above a spatial frequency of 3 $mm^{-1}$. The spatial frequency at 10% of the modulation-transfer function was about 6 $mm^{-1}$.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.1
• /
• pp.73-80
• /
• 2003

We report herein synthetic results obtained six new types of bis-benzocrown ethers containing imine group. Bis crown ethers1~3 are aminobenzo-15-crown-5-ether linked with terephthalaldehyde, isophthalaldehyde, phthaldehyde respectively by imine reaction. Bis crown ethers1~3 are different distances in each crown ether rings. Bis crown ether 4 has large cavity in crown ethers. Functionalized crown ether 5 is synthesized amonobenzo-15-crown-5-ether and terephthaladehyde same ratio at one to one. Bis crown ether 6 has photosensitive linkage between crown ethers. Bis crown ether 7 is prepared by amonobenzo-15-crown-5-ether and triethyl ortho formate. 4'-Nitrobenzo-crown ethers and 3',4'-dinitrobenzo-crown ethers were prepared by nitration of benzo crown ethers, obtained from the reaction of catechol and oligoethylene glycol ditosylate. Crown ethers containing aldehyde group were synthesized from the reaction of 3,4-dihydroxybenzaldehyde and corresponding ditosylate respectively. The synthesized crown ethers were characterized respectively by IR, NMR, GC-Mass.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.348-355
• /
• 1991

Polysiloxane copolymers were prepared by copolymerizing hexamethylcyclotrisiloxane with tetramethylcyclotetrasiloxane, and then reacted with allyamine. Copolymers containing naphthoquinone-1,2-diazide-5-sulfonyl group were synthesized by reacting naphthoquinone-1,2-diazide-5-sulfonyl chloride with siloxane copolymers having amino group. Thermal decomposition temperatures of copolymers were $360{\sim}450^{\circ}C$, and photosensitive characteristics were dependent on the molecular weights of backbone resins and sensitizers. Sensitivity of copolymers was $50{\sim}120mJ/cm^2$ and contrast(${\gamma}$) was 1.4~2.1.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.210-217
• /
• 2004

In this study, a new process, named as nano replication printing(nRP) process, is developed for printing any figure in the range of several micrometers by using voxel matrix scanning scheme. In this newly developed process, a femto-second laser is scanned on a photosensitive monomer resin in order to induce polymerization of the liquid resin according to a voxel matrix which is transformed from bitmap format file. After the polymerization, a droplet of ethanol is dropt to remove the unnecessary remaining liquid resin and then the polymerized figures with nano-scaled precision are only remaining on the glass plate. By the nRP process, any figure file of bitmap format could be reproduced as nano-scaled precision replication in the range of several micrometers. Also, nano/micro-scaled patterns for an extremely wide range of applications would become a technologically feasible reality. Some of figures with nano-scaled precision were printed in scaled replication as examples to prove the usefulness of this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.77-84
• /
• 2006

With the development of micro/nano spacecraft, concepts of micro propulsion are introduced for orbit transfer and drag compensation as well as attitude control. Micro solid propellant thruster has been attention as one of possible solution for micro thruster. In this paper, micro solid propellant thruster is introduced and research on basic components of a micro solid propellant thruster is reported. Micro Pt igniter was fabricated through negative patterning and quantitative effect of geometry was estimated. The characteristic of HTPB/AP solid propellant was investigated to measure the homing velocity. A combustion chamber was fabricated by means of anisotropic etching of photosensitive glass. Finally, micro solid propellant thrusters having various geometries were fabricated and tested.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2015

Micro igniter on the glass membrane for MEMS thruster was developed. The stability of the micro igniter by using a glass membrane with a thickness of tens of microns was improved. The micro igniter was fabricated by anisotropic wet etching of photosensitive glass and deposition of Pt/Ti for electric heat coil. The solid propellant was loaded into the propellant chamber without an especial technique due to the high structural stability of the glass membrane. Ignition tests were performed successfully. The minimum ignition delay was 27.5 ms with an ignition energy of 19.3 mJ.