• 한국재료학회지
• /
• 제28권2호
• /
• pp.124-128
• /
• 2018

N-type porous silicon (PS) layers and thermally oxidized PS layers have been characterized by various measuring techniques such as photoluminescence (PL), Raman spectroscopy, IR, HRSEM and transmittance measurements. The top surface of PS layer shows a stronger photoluminescence peak than its bottom part, and this is ascribed to the difference in number of fine silicon particles of 2~3 nm in diameter. Observed characteristics of PL spectra are explained in terms of microstructures in the n-type PS layers. Common features for both p-type and n-type PS layers are as follows: the parts which can emit visible photoluminescence are not amorphous, but crystalline, and such parts are composed of nanocrystallites of several nm's whose orientations are slightly different from Si substrate, and such fine silicon particles absorb much hydrogen atoms near the surfaces. Light emission is strongly dependent on such fine silicon particles. Photoluminescence is due to charge carrier confinement in such three dimensional structure (sponge-like structure). Characteristics of visible light emission from n-type PS can be explained in terms of modification of band structure accompanied by bandgap widening and localized levels in bandstructure. It is also shown that hydrogen and oxygen atoms existing on residual silicon parts play an important role on emission stability.

• Bulletin of the Korean Chemical Society
• /
• 제16권11호
• /
• pp.1019-1023
• /
• 1995

A light-emitting silicon material was prepared by electrochemical etching of n-Si single crystal wafers in a solution of hydrofluoric acid and ethanol. Visible photoluminescence from the silicon was inhomogeneous and decayed rapidly in the ambient laboratory conditions or with photoirradiation. Substantial improvements in photoluminescence which include little-dependent luminescence peak energy with excitation energy variation and longer-lasting room temperature visible photoluminescence were achieved when the surface of photoluminescent silicon material was derivatized with the surface modifier of octadecylmercaptan. Surface modification of the photoluminescent silicon was evidenced by the measurements of contact angles of static water drops, FT-IR spectra and XPS data, in addition to changed photoluminescence. Similar improvements in photoluminescence were observed with the light-emitting silicon treated with dodecylmercaptan, but not with octadecane. The present results indicate that sulfurs of octadecylmercaptans or dodecylmercaptans appear to coordinate the surface Si atoms of LESi and perturb the surface states to significantly change the luminescent characteristics of LESi.

• Transactions on Electrical and Electronic Materials
• /
• 제8권5호
• /
• pp.191-195
• /
• 2007

We investigated photoluminescence characteristics of ZnO nano needle-like rods grown on a c-plane $AL_2O_3$ substrate by the hot wall epitaxy method. The nano-rods were vertically well aligned along the ZnO c-axis. The diameters of the ZnO nano-rods ranged from 20 nm to 30 nm and their lengths were between 600 and 700 nm. In the photoluminescence spectrum at 10 K, the exciton emission bound to the neutral donor dominated while defect related emission was weakly observed. With a further increase of temperature, the free exciton emission appeared and eventually became dominant at room temperature.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.278-281
• /
• 2002

We investigated the photoluminescence (PL) characteristics of a highly soluble, fullerene-containing copolymer in both solution and film states. In solution state, the copolymer showed different PL characteristics depending on the aromaticity of the solvent. The PL from polystyrene segments of the copolymer was strongly quenched in an aromatic solvent, while the PL from fullerene remained unchanged. However, the films cast from an aromatic and a nonaromatic solvent demonstrated very similar PL characteristics, implying that the chain alignment or orientation and packing in the films occur in a similar way irrespective of the solvent.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.365-371
• /
• 2009

크기가 다른 양자점 (chirped 양자점) 구조에 대하여 전기발광 (Electroluminescence, EL) 특성과 광발광 (Photoluminescence, PL) 특성을 측정하고 비교 분석하였다. PL 특성에서는 양자점의 기저준위에 의한 피이크가 우세하게 나타난 반면, EL 특성에서는 여기준위에 의한 특성이 우세하게 나타났다. 이와 같은 특성비교로부터 기저준위도 EL 특성에 영향을 미칠 수 있도록 chirped 양자점 구조를 설계하면 파장대역폭이 더욱 넓은 고휘도 발광소자 개발이 가능할 것임을 제안하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.16-20
• /
• 2001

Optoelectronic characteristics of the superlattice diode as a function of deposition temperature and annealing conditions have been studied. The multilayer nanocrystalline silicon/adsorbed oxygen (nc/Si/O) superlattice formed by molecular beam epitaxy (MBE) system. Experimental results showed that deposition temperature of 550$^{\circ}C$, followed by hydrogen annealing leads to best results, in terms of optical photoluminescence (PL) and electrical current-voltage (I-V) characteristics. Consequently, the experimental results of multilayer Si/O superlattic device showed the stable photoluminescence and good insulating behavior with high breakdown voltage. This is very useful promise for Si-based optoelectronic devices, and can be readily integrated with conventional silicon ULSI processing.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.531-535
• /
• 1996

ZnGa2O4 and Mn-doped ZnGa2O4 were synthesized using the state reaction method to investigate their photoluminescence characteristics depending on Mn concentration. Under 254nm excitation, ZnGa2O4 exhibited a broad-band emission extending from 330 nm to 610 nm peaking at 450nm. On the other hand Mn-doped ZnGa2O4 showed a new strong narrow-band emission peaking at 504 nm and maximum intensity at the doping concentration of 0.006 mole Mn.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.197-197
• /
• 2016

Quantum dot nanocrystals(QDs) have been emerged as next generation materials in the field of energy harvesting, sensor, and light emitting because of their compatibility with solution process and controllable energy band gap. Especially, characteristics of color tuning and color purity make it possible for QDs to be used photoluminescence materials. Photoluminescence devices with QDs have been researched for a long time. Photoluminescence quantum yield(PL QY) is important factor that defines the performance of Photoluminescence devices. One of the ways to achieve better PL QY is ligand modification. If ligands are changed to proper electron donating group, electrons can be confined in the core which results in enhancement of PL QY. Because of the reason, short ligands are preferred for enhancing PL QY. Thiophenol-based ligands are shorter than typical alkyl chain ligands. In this study, the effect of thiophenol-based ligands with different functional groups are investigated. Four different types of thiophenol-based organic materials are used as organic capping ligand. QDs with bare thiophenol and fluorothiophenol show better quantum yield compared to oleic acid.

• 한국광물학회지
• /
• 제22권2호
• /
• pp.81-86
• /
• 2009

변색 효과를 보이는 6종의 보석들을 대상으로 UV-Vis 분광분석과 Photoluminescence에 의한 발광 및 형광 특성을 조사하였다. 514 nm Ar이온 source로 PL을 측정한 결과 발광 피크의 모양이 다르게 나타났고 같은 천연과 합성 보석에서는 동일한 피크가 나타났다. 이들 발광 및 형광 특성은 보석들의 결정 구조와 관련이 있음을 관찰할 수 있었다. 325 nm He-Cd source에 의한 형광 조사에서는 합성 알렉산드라이트와 합성 칼라체인지 사파이어 그리고 천연 알렉산드라이트에서 강한 형광이 나타났고 이를 PL 피크로 확인하였다.

• 한국재료학회지
• /
• 제16권8호
• /
• pp.485-489
• /
• 2006

The preparation conditions of $YBO_3$:Eu phosphor particles having the maximum photoluminescence intensity under vacuum ultraviolet in the spray pyrolysis were optimized. The $YBO_3$:Eu phosphor particles prepared from spray solution with stoichiometric amount of boric acid had the maximum photoluminescence intensity. The $YBO_3$:Eu phosphor particles with pure phases were formed at low post-treatment temperatures because of fast reaction of yttrium and boron components without volatilization of boron component. The prepared $YBO_3$:Eu phosphor particles by spray pyrolysis had fine size, narrow size distribution and regular morphology. The photoluminescence intensity of the prepared $YBO_3$:Eu phosphor particles under vacuum ultraviolet was 103% of the commercial $(Y,Gd)BO_3$:Eu phosphor particles.