• 공업화학
• /
• 제34권4호
• /
• pp.412-420
• /
• 2023

본 연구는 red mud와 fly ash 기반 geopolymer 흡착제(RFGPA)를 소성 온도 변화(200, 400, 600 ℃)에 따라 제조하고 소성 온도가 methylene blue (MB)의 흡착에 미치는 영향을 조사하였다. 또한, X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), 및 Brunauer-Emmett-Teller (BET) 분석을 통해 제조한 RFGPA의 특성을 조사하였다. MB를 이용한 소성 온도에 따른 RFGPA의 흡착 kinetics 결과 약 72시간에 MB 흡착 평형에 도달하였고, 흡착 isotherm 결과 MB 농도가 증가함에 따라 흡착 정도가 증가하는 경향을 보였다. 또한, RFGPA에 대해 소성 온도가 증가할수록 MB 흡착량이 감소하는 것을 확인하였다. RFGPA의 MB 흡착메커니즘을 확인하기 위해 수학적 모델식에 적용한 결과 상대적으로 Freundlich와 Sips 모델이 Langmuir 모델 보다 더 적합한 것을 확인하였다. 제조한 RFGPA 내에 존재하는 Fe₂O₃에 대한 MB의 광분해 효과를 확인하기 위해 dark condition 및 visible condition에서 MB 분해 정도를 분석한 결과 visible condition에서 분해속도가 dark condition보다 약 3배 빠른 것을 확인하였다.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.185-202
• /
• 2018

Photoelectrochemical (PEC) cells can convert solar energy, the largest potential source of renewable energy, into hydrogen fuel which can be stored, transported, and used on demand. In terms of cost competitiveness compared with fossil fuels, however, both photocatalytic efficiency and cost-effectiveness must be achieved simultaneously. Improvement of cost-effective, scalable, versatile, and eco-friendly fabrication methods has emerged as an urgent mission for PEC cells, and solution-based fabrication methods could be capable of meeting these demands. Herein, we review recent challenges for various nanostructured oxide photoelectrodes fabricated by solution-based processes. Hematite, tungsten oxide, bismuth vanadate, titanium oxide, and copper oxides are the main oxides focused on, and various strategies have been attempted with respect to these photocatalyst materials. The effects of nanostructuring, heterojunctions, and co-catalyst loading on the surface are discussed. Our review introduces notable solution-based processes for water splitting photoelectrodes and gives an outlook on eco-friendly and cost-effective approaches to solar fuel generation and innovative artificial photosynthesis technologies.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.1-7
• /
• 2008

The effects of $TiO_2$ contents and UV irradiation treatment on the surface properties of PLA films embedded with $TiO_2$ nanoparticle were investigated. Whereas UV irradiation decreased reflectance of the treated PLA films proportionally with increasing UV energy, the reflectance of PLA/$TiO_2$ films increased with increasing UV energy. The UV irradiation treatment caused PLA/$TiO_2$ blend films more polar as indicated in the generation of new carbonyl group and decrease in zeta potentials, which was more pronounced with the introduction of $TiO_2$. Upon UV irradiation, $TiO_2$ particles appeared on the film surface as observed in SEM images. The PLA/$TiO_2$ blend films showed photocatalytic properties such as photobleaching of methylene blue, deodorization of ammonia and antimicrobial activity in comparison with pure PLA films.

• 산업기술연구
• /
• 제22권B호
• /
• pp.117-124
• /
• 2002

We prepared the nano-sized $TiO_2$ particles by the diffusion flame reactor and investigated the effects of several process variables on the generation and transport properties of $TiO_2$ particle. As the length from the tip of diffusion flame reactor increases, the size of $TiO_2$ particle increases by the coagulation between particles. The structure of $TiO_2$ particles prepared is almost found to be anatase. It was found that the $TiO_2$ particle size depends more largely on the change of reactor temperature than on the change of inlet $TiCl_4$ concentration. By the photo-degradation experiment of phenol and toluene with the prepared $TiO_2$ particles, we found that the photo-degradation efficiencies of phenol and toluene change, depending on the process variables such as size of $TiO_2$ photocatlysts, concentration of phenol or toluene. Degradation efficiencies of phenol and toluene was above 90% in our experiments in 60 minutes.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.1-6
• /
• 2014

Here we report improved photo-catalytic effect of $Ag_2S$ under visible light using carbon nano-tubes (CNT) modified with $Ag_2S$ nanoparticles. The optical properties, structural properties and compositional analysis, as well as the photo-electrochemical properties of the prepared composites were investigated. It was found that the photocurrent density, and the photo-catalytic effect, was increased by modification of CNT in this way. Compared with the separate effects of $Ag_2S$ and CNT nanoparticles, the photocatalytic effect of CNT-modified-with-$Ag_2S$ composites, increased significantly due to a synergistic effect between the CNT and the $Ag_2S$ nanoparticles.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.415-422
• /
• 2005

The photocatalytic decolorization of Reactive Red 2B(RR2B) was studied using immobilized photocatalyst/UV System. Two pairs of 20 W UV-B and UV-C lamps were employed as the light source. Immobilization of $TiO_2$ was carried out using sponge (as the photocatalyst body) and silicone sealant(as the binder). The effects of parameters such as the thickness, pore size of sponge photocatalyst and attached material on the reactor bottom were investigated. The results showed that the optimum thickness of sponge photocatalyst was 1 cm. Decolorization of reactor which had the bottom coated $TiO_2$ was higher than that of reactor attached aluminum plate. Decolorization of photocatalyst with large pore size(mean pore size, 3.8 mm) was higher than that of the small(mean pore size, 1.75 mm). Initial decolorization of RR2B could be descrived using the Langmuir-Hinshelwood(L-H) model and gave constant values of $0.55mg/l{\cdot}min(k)\;and\;2.65{\times}10^{-2}l/mg(K)$, respectively.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.150-156
• /
• 2008

Pitch-binded activated carbon fiber(ACF)/$TiO_2$ composite photocatalysts were prepared by Carbon Tetra Chloride (CTC) solvent mixing method with different mixing ratios of anatase to ACF. The result of the textural surface properties demonstrated that there is a slight increase in the Brunauer, Emmett and Teller (BET) surface area of composites with an increase of the amount of ACF. The surfaces structure morphologies of the composites were observed using an Scanning Electron Microscope (SEM). In the XRD patterns for all ACF/$TiO_2$ composites, the diffraction peaks showed the formation of anatase crystallites. The EDX spectra showed the presence of C, O and Si with strong Ti peaks. Most of these samples were richer in carbon and major Ti metal than any other elements. From the photo-decomposition results, the excellent activity of the ACF/$TiO_2$ composites between c/$c_0$ for methylene blue and UV irradiation time could be attributed to both the effects of the photocatalysis of the supported $TiO_2$ and adsorptivity of activated carbon fiber and another carbon derived from pitch.

• Environmental Analysis Health and Toxicology
• /
• 제19권3호
• /
• pp.271-278
• /
• 2004

Epoxy resins are mostly used as a molding material for drinking water tank. Bisphenol A is used at a constituent material for epoxy resins and is widely suspected to act as an endocrine disrupter. In this study, we investigated embryo hatching in zebrafish reared in water undergone leaching process of expoxy resin, and found a decreased survival rate. Bisphenol A eluted from epoxy resin in drinking water tank was completely degraded by TiO$_2$ photocatalysis. We detected 7.8 ng/ml of bisphenol A in epoxy resin tank, and observed that the concentration was undetectable after 48h photocatalysis over TiO$_2$. There was no toxicity in hatching rates in zebrafish and morphogenesis after photocatalysis. The effect of TiO$_2$ photocatalytic reactions on the catalase activities in the f]y stage of zebrafish was also examined. At 1 week post hatching, cataiase activities were higher both in the group of epoxy resin with 48 h TiO$_2$ photocatalysis and in the TiO$_2$ photocatalysis for 48 hours were higher than control group. However catalase activities of the treatment group of epoxy resin by TiO$_2$ photocatalysis for 48 hours were similar to control in 5 weeks post hatching fries. In conclusion, the toxicity of TiO$_2$ photocatalysis was not observed in this zebrafish.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.39-45
• /
• 2009

The importance of nano gold particles has been increased in the field of bio physics and medicine, recently. In this regard, the study aims to analyze how the harmless nano gold particles can be transformed by respective variables. In this study, electrospun PU nano-webs were impregnated with aqueous $HAuCl_4$ solution and UV light was irradiated on the webs. Au-ions were reduced to nano particles by photocatalytic reduction and these nano gold particles were characterized by SEM, UV-vis, Zetasizer, Spectrophotometer, EDS. $HAuCl_4$ solution concentration and UV irradiation time have heen examined to change the amount of absorption. Nano gold particles size and UV-Vis absorbances were increased with $HAuCl_4$ solution concentration and UV irradiation time.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.133-139
• /
• 2010

Photoelectrocatalytic decolorization of methlene blue (MB) in the presence of two types of carbon nanotube/titania and yttrium-treated carbon nanotube/titania electrodes in aqueous solutions were studied under visible light. The prepared composite electrodes were characterized by X-ray diffraction, transmission and scanning electron microscopy, energy dispersive X-ray analysis, and photoelectrocatalytic activity. The photoelectrocatalytic performances of the supported catalysts were evaluated for the decolorization of MB solution under visible light irradiation. The results showed that yttrium incorporation enhanced the decolorization rate of MB. It was found that the photoelectrocatalytic degradation of a MB solution could be attributed to the combined effects caused by the photo-degradation of titania, the electron assistance of carbon nanotube network, the enhancement of yttrium and a function of the applied potential. The repeatability of photocatalytic activity was also tested. The presence of yttrium enhanced the hydrophillicity of yttrium-carbon nanotubes/titania electrode because more OH groups can be adsorbed on the surface.