• 제목/요약/키워드: Photo-to-dark ratio

검색결과 14건 처리시간 0.019초

다층구조($CaWO_4/a-Se$) 기반의 X선 검출센서에서 a-Se에 첨가된 As의 특성비 연구 (The Study on Characteristic Composition of As in a-Se with X-ray Detection Sensor using $CaWO_4/a-Se$)

  • 최장용;이동길;신정욱;김재형;남상희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
    • /
    • pp.432-435
    • /
    • 2002
  • The ultimate study of this research is to improve the properties of digital X-ray receptor based on amorphous selenium. There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. But each two systems have strength and weakness. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. ln this study, we investigated the electrical characteristic of multi-layer$(CaWO_4+a-Se)$ as a photoconductor according to the changing iodine composition ratio. The iodine composition ratio of a-Se compound is classified into 5 different kinds which have 30ppm, 100ppm, 300ppm, 500ppm, 700ppm and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 700ppm iodine showed good characteristic of $2.53nA/cm^2$ dark current and $479nC/cm^2{\cdot}mR$ net charge at $3V/{\mu}m$.

  • PDF

인쇄/소결 방법에 의한 CdS 광전도 셀 제작과 특성 (Fabrication and characterization of CdS photoconductive cell by the print/sintering method)

  • 정태수;김택성;정철훈;이훈;신영진;홍광준;유평렬
    • 센서학회지
    • /
    • 제7권5호
    • /
    • pp.350-355
    • /
    • 1998
  • 인쇄/소결 방법으로 광감도가 매우 큰 CdS다결정 후막을 만들고 이를 이용하여 광전도 셀을 제작하였다. 낱알 크기는 $4\;{\mu}m$ 정도였다. 광전도 셀은 불순물로 첨가한 $CuCl_2$ 양이 0.06 - 0.12 mg 정도이면 감도와 광전류와 암전류 비율이 각각 0.8과 $10^5$ 이상을 나타내었고 응답파장은 511 nm 였다. 또한 주파수 특성을 나타내는 응답시간은 오름시간과 감쇠시간이 각각 50과 20 ms 정도 이였으며 최대허용 소비전력은 80 mW 이상이었다. 이상과 같이 인쇄/소결 방법으로 제작된 광전도 셀은 CdS 1g당 $CuCl_2$ 양이 0.06-0.12 mg 정도 주입되면 센서로서 좋은 특성을 나타내었다.

  • PDF

승화법에 의한 $CdS_{0.67}Se_{0.33}$ 단결정 성장과 광전도 특성 (Growth of $CdS_{0.67}Se_{0.33}$ single crystal by sublimation method and their photoconductive characteristics)

  • 홍광준;이상열
    • 센서학회지
    • /
    • 제7권2호
    • /
    • pp.131-139
    • /
    • 1998
  • $CdS_{0.67}Se_{0.33}$ 단결정을 승화법으로 성장시켜 Laue 배면 반사법 (back refection Laue method)으로 결정성과 면의 방향이 (0001)임을 알아보았고, EDS(Energy Dispersive X-ray Spectrometer)를 이용하여 소성비가 $CdS_{0.67}Se_{0.33}$ 임을 확인하였다. Van der Pauw 법으로 Hall 효과를 측정하여 운반자 농도(carrier density)와 이동도(mobility)의 온도의존성을 연구하였으며, 이동도는 30 K에서 150 K까지는 불순물에 의한 산란 (impurity scattering)에 기인하고 있으며, 150 K에서 293 K까지는 격자 산란 (lattice scattering)에 따라 감소하였다. 또한 운반자 농도의 In n 대 (1/T)에서 구한 활성화 에너지는 0.21 eV였다. 광전도 셀(cell)의 특성으로 spectral response, 최대 허용 소비전력(maximum allowable power dissipation: MAPD), 광전류와 암전류(photocurrent/darkcurrent: pc/dc) 및 응답시간을 측정하였다. Cu 증기분위기에서 열처리한 광전도 셀의 경우 ${\gamma}$ = 0.99, pc/dc = $1.84{\times}10^{7}$, MAPD : 323mW, rise time : 9.3ms, decay time : 9.7ms로 가장 좋은 특성을 얻었다.

  • PDF

Mesoporous Titanium Oxo-Phosphate에 의한 살균제 Chlorothalonil의 광분해 (Photocatalytic Degradation of Fungicide Chlorothalonil by Mesoporous Titanium Oxo-Phosphate)

  • 최충렬;김병하;이병묵;최정;이인구;김장억
    • 한국환경농학회지
    • /
    • 제22권4호
    • /
    • pp.284-289
    • /
    • 2003
  • Mesoporous titanium oxo-phosphate(Ti-MCM)은 기존의 유기성 오염물질의 광분해제로 널리 이용되고 있는 $TiO_2$에 비해 표면적이 매우 넓은 장점이 있다. 그러므로 본 연구에서는 Ti-MCM에 의한 chlorothalonil의 흡착 및 광분해 특성을 $TiO_2$와 비교하였다. 합성된 Ti-MCM은 hexagonal 형태로 d-spacing이 4.1 nm이었다. 암조건에서 $TiO_2$에 의한 chlorothalonil의 흡착은 거의 일어나지 않았으나, Ti-MCM에 의한 흡착은 반응 1시간까지 25%로 급격히 증가하여 흡착평형에 도달하였다. UV조사 하에서 반응 9시간 후의 $TiO_2$와 Ti-MCM에 의한 chlorothalonil의 제거율은 각각 88%와 100%로 나타났다. 그러나 정치상태에서의 광분해 속도는 chlorothalonil과 Ti-MCM사이의 낮은 접촉에 의한 반응성의 감소로 느린 경향을 나타내었다. 또한 Ti-MCM에 의한 chlorothalonil의 분해효율은 용액의 초기 농도가 낮을수록, pH 7까지 반응용액의 pH가 높을수록 증가하였다.