• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.996-999
• /
• 2012

From UV irradiation, we achieved homeotropic liquid crystal alignment on blended photo-polymer layer which is composed of polyvinyl-cinnamate (PVCi) and homeotropic polyimide (PI). From vertical alignment (VA) mode, we measured threshold voltages by various PVCi doping concentration. Also, the rise time and fall time of VA cells were measured to verify the best doping concentration. Transmittance curves showed about 70% value between 380 nm and 780 nm wavelength which mean visible region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer duribg UV irradation time of 60min.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.878-884
• /
• 1998

We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer during UV irradation time of 60min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.198-201
• /
• 1997

We investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with slanted non-polarized ultraviolet (UV) light irradiation on mixtured polyimide (PI) surfaces. It was found that the monodomain alignment of NLC is obtained in a cell with an angle of incidence of 75∼85 degrees on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect due to photo-depolymerization of polymer on Pl surfaces. We successfully observed that the pretilt angle of NLC is generated above 5 degree with an angle of incidence of 75∼85 degree. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the Polymer surfaces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1160-1166
• /
• 2006

Maxwell-displacement-current (MDC) measuring technique has been applied for the investigation of monolayers of poly(vinyl alcohol)s bearing azobenzene side-chains (6Az5PVA) mixed with p-pentyl-p'-cyano-biphenyls (5CBs) on a water surface. For mixed monolayers containing trans-form 6Az5PVA and LCs, displacement current due to photo isomerization was not generated with alternative photo-irradiation with UV and svisible light. In contrast, for mixed monolaters containing cis-form 6Az5PVA and LCs, displacement current was generated. Finally, it was found that the alignment layers deposited in cis-form could photoregualte the orientation of LCs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.453-454
• /
• 2008

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1083-1084
• /
• 2002

We prepared the blend alignment layers made from coumarin based photopolymer and polyimides for liquid crystal(LC) alignment using linearly polarized ultraviolet(UV) exposure. The alignment properties of LC were found to depend on the type of polyimide in the blend alignment layers. The degree of photereaction of polyimide was important factor for LC alignment direction on the blend alignment layers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.917-921
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various Photo-crosslinkable Polyimide (Pl) based polymer and blending photopolymer surfaces were investigated. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyimide based polymer surface containing biphenyl (BP), decyl (de), and cholesteryl (chol) group, respectively. However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (Pl and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.