• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.336-339
• /
• 2000

Effects of liquid crystal (LC) alignment using an in-situ photo-alignment method by linearly polarized UV exposure during imidization of polyirnide (PI) on the two kinds of PI surfaces with side chain were investigated. The generated pretilt angle in nematic (N) LC using an in-situ photo-alignment method was smaller than that of a conventional photo-alignment method for short UV exposure time. Also, the pretilt angle of the NLC using an in-situ photo-alignment method increases with increasing UV exposure time on the two kinds of the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.533-536
• /
• 1999

In this study, we investigated pretilt angle generation and liquid crystal alignment by UV light irradiation during imidization of polyimide. Generated pretilt angle of NLC by using in-situ UV photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. We found that in-situ UV photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.950-953
• /
• 2000

Aligning capabilities of nematic liquid crystal(NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyimide (PI) surface for homeotropic alignment were studied. The high angle for NLC can be measured by obliquely UV exposure of 30°on the PI surface for 10∼20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method. Finally, we suggest that the control of pretilt angle in NLC with obliquely polarized UV exposure during imidization of the polymer for homeotropic alignment is promising method to generate high pretilt angle.

• 폴리머
• /
• 제30권5호
• /
• pp.417-421
• /
• 2006

신나모일 그룹의 광배향 메커니즘과 공정 조건들과의 관계를 이해하기 위하여 폴리(실록산 신나메이트) (PSCN)를 이용한 광배향 연구를 진행하였다. DSC와 편광현미경 실험에서 PSCN의 등방성 온도는 $105^{\circ}C$ 이상이었으며 액정 온도 구간에서 한 번 배열된 분자들은 저온이나 고온의 등방성 온도 구간에서도 없어지지 않는 열안정성을 보였다. UV/Vis 흡수 실험을 통해서는 광이량화 반응이 주된 광배향 반응이며 신나모일기가 스스로 배열되는 경향이 강하여 광이량화 반응의 효율을 높이는데 기여하지만 광조사가 지나칠 경우 경쟁 관계에 있는 photo-fries 반응이 증가하여 오히려 광배향 성질이 떨어짐을 알 수 있었다. 한편, photo-fries 반응은 UV의 파장을 조절하여 억제할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.507-510
• /
• 2000

Alignment effects for nematic liquid crystal (NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyirnide (PI) surface for homeotropic alignment were studied. The high pretilt angle in NLC can be measured by obliquely W exposure of $30^{\circ}$ on the PI surface for 10~20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method.

• Journal of Information Display
• /
• 제8권1호
• /
• pp.6-9
• /
• 2007

Orientational alignment patterns have been proven to be that they are very useful for realizing diverse properties of liquid crystals. Here we produced the patterns combining interfered laser beams. A photo-isomerizable polymer including azo unit, which induces nematic liquid crystal alignment to the polarized laser light, was used as the alignment to layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.75-79
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultravi-olet (UV) light irradiation during imidization of polymide. The generated pretilt angle of nematic (N) LC by using the in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. In case of using the polymer(AL-3046), we found that the in-situ Uv photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.545-548
• /
• 1999

The electro-optical characteristics of photo-aligned vertical-alignment (VA)-liquid crystal display (LCD) with non-polarized ultraviolet (UV) light irradiation of 45\`on homeotropic polyimide (Pl) surface were investigated. LC alignment on photo-aligned VA-LCD is attributed to photo-depolymerized reaction of the polymer with non-polarized UV light irradiation on PI surface. We had good voltage-transmittance (V-T) characteristics of photo-aligned VA-LCD. The response time of photo-aligned VA-LCD was slower than that of the rubbing-aligned VA-LCD. Finally, we suggest that the slow response time of photo-aligned VA-LCD depends on the LC domain.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1601-1604
• /
• 2006

A novel photo-alignment scheme using normally incident periodically intensity-modulated UV light has been developed and demonstrated to efficiently yield a stable pretilt angle of nematic liquid crystals by single exposure. The scheme, referred to as the "photo-rubbing", consists in unidirectional scan of the intensity-modulated UV light over the photo-alignment film, which causes asymmetrical photo-reactions in the film. We show here its successful application to multi-domain alignment processing. Thanks to the normal incidence, the photo-rubbing removes the instrumental disadvantages of the conventional oblique incidence technique, thereby providing a true practical solution for photo-alignment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.197-198
• /
• 2000

A surface-assisted photo-control of the liquid crystal (LC) alignment has been achieved by modifying the topmost surface of the polyimide film with photo-reactive molecules. Recently, photo-alignment technique using a thin film of poly(vinyl cinnamates) have been reported. However their commercial potentiality is limited by their low thermal stability. To enhance thermal stability, we synthesized the chalcone derivatives as the photo-reactive molecules and introduced the materials on the surface-modified polyimide film.. We identified that the photo-chemical reaction of the chalcone derivatives occur in few minutes with irradiation of UV light. The photo-alignment characteristics of the modified polyimide films treated by polarized UV light and their LC cells are investigated as a function of exposure dose.