• 한국광물학회지
• /
• 제27권4호
• /
• pp.223-233
• /
• 2014

광산에서 순도 높은 금은을 추출하기 위해 청화법을 이용해 왔다. 이러한 광산 활동에서 많은 양의 시안이 사용되어 왔으며 이에 따라 고농도의 시안을 함유한 광산폐수가 발생되어 광산 주변 지역의 수계를 오염시킬 수 있다. 본 연구에서는 이러한 시안함유 광산폐수 및 침출수로부터 시안을 제거하기 위하여 $TiO_2$ 광촉매와 UV-LED 광원을 이용한 광산화 공정에 대하여 연구하였다. 기존 광산화 공정에서는 주로 UV 램프가 광원으로 많이 사용되었지만 여러 가지 단점으로 인하여 본 연구에서는 그 대체 광원으로 UV-LED의 적용 가능성을 평가하였다. 세 종류의 $TiO_2$의 광산화 효율을 평가한 결과, 아나타제와 루틸이 혼합된 Degussa P25가 광산화 효율이 가장 좋은 것으로 확인되었다. 또한 형태와 파장이 다른 네 종류의 UV-LED를 비교 평가한 결과, 365 nm 램프형 > 365 nm 캔형 > 280 nm 캔형 > 420 nm 램프형 순으로 제거효율이 좋은 것으로 나타났다. 본 연구는 UV-LED는 기존의 UV 램프의 단점을 극복할 수 있는 대체광원으로서 광산화 공정에 적용 가능하다는 것을 입증하였으며, 시안의 광산화 효율은 $TiO_2$ 광촉매의 종류에도 영향을 받는다는 것을 확인하였다.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.411-419
• /
• 2012

In this study, Ibuprofen (IBP) degradation by the photo catalytic process was investigated under various parameters, such as UV intensity, optimum dosage of $TiO_2$, alkalinity, temperature and pH of bulk solution. The pseudo-first order degradation rate constants were in the order of $10^{-1}$ to $10^{-4}min^{-1}$ depending on each condition. The Photocatalytic IBP degradation rate increased with an increase in the applied UV power. At high UV intensity a high rate of tri-iodide ($I_3{^-}$) ion formation was also observed. Moreover, in order to avoid the use of an excess catalyst, the optimum dosage of catalyst under the various UV intensities (30 and 40 W/L) was examined and ranged from approximately 0.1 $gL^{-1}$. The photo catalytic IBP degradation rate was changed depending on the alkalinity and temperature and pH in the aqueous solution. This study demonstrated the potential of photo catalytic IBP degradation under different conditions.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.156-159
• /
• 2013

The electrical properties of ZnO nanowire field effect transistors (FETs) have been investigated depending on various diameters of nanowires. The ZnO nanowires were synthesized with an Au catalyst on c-plane $Al_2O_3$ substrates using hot-walled pulsed laser deposition (HW-PLD). The nanowire FETs are fabricated by conventional photo-lithography. The diameter of ZnO nanowires is simply controlled by changing the thickness of the Au catalyst metal, which is confirmed by FE-SEM. It has been clearly observed that the ZnO nanowires showed different diameters simply depending on the thickness of the Au catalyst. As the diameter of ZnO nanowires increased, the threshold voltage of ZnO nanowires shifted to the negative direction systematically. The results are attributed to the difference of conductive layer in the nanowires with different diameters of nanowires, which is simply controlled by changing the catalyst thickness. The results show the possibility for the simple method of the fabrication of nanowire logic circuits using enhanced and depleted mode.

• Carbon letters
• /
• 제18권
• /
• pp.30-36
• /
• 2016

Well-dispersed Ag₃VO₄ nanoparticles @polyacrylonitrile (PAN) nanofibers were synthesized by an easily controlled, template-free method as a photo-catalyst for the degradation of methylene blue. Their structural, optical, and photocatalytic properties have been studied by X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy equipped with rapid energy dispersive analysis of X-ray, photoluminescence, and ultraviolet-visible spectroscopy. The characterization procedures revealed that the obtained material is PAN nanofibers decorated by Ag₃VO₄ nanoparticles. Photocatalytic degradation of methylene blue investigated in an aqueous solution under irradiation showed 99% degradation of the dye within 75 min. Finally, the antibacterial performance of Ag₃VO₄ nanoparticles @PAN composite nanofibers was experimentally verified by the destruction of Escherichia coli. These results suggest that the developed inexpensive and functional nanomaterials can serve as a non-precious catalyst for environmental applications.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.221-223
• /
• 2015

In this work, we report on the preparation of the anodically-grown $TiO_2$ nanotube arrays sensitized with $In_2S_3$ nanoparticles by using the SILAR (successive ionic layer adsorption and reaction) process. We evaluate the photo-catalytic properties of the prepared hetero-structures under visible-light illumination. The results reveal that the $TiO_2/In_2S_3$ system has enhanced photo-catalytic characteristics including higher chopping height. Improved performance of the heterojunction is attributed to the narrower band gap of $In_2S_3$ and its favorable position within the conduction band relative to that of $TiO_2$.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.1-8
• /
• 2005

본 연구에서는 광촉매의 광자효율을 증가시키고, 물성을 변화시켜 광촉매 성능을 향상시키기 위하여, 자동차 폐 촉매에서 추출된 귀금속 용액 또는 $H_2PtCl_6$ 용액을 수열합성법에 의해 제조된 $TiO_2$와 상업용 $TiO_2$인 P-25(Degussa Co.)를 함침시켜 변조된 광촉매를 제조하였다. 그리고 변조된 광촉매는 ICP-AES, EDS, UV-DRS, XRD, XANES, SEM에 이용하여 물성분석 하였다. 그리고 폐 자동차 촉매전환기의 추출용액을 함침시킨 광촉매를 변조하여 band-gap energy를 1.76eV(705 nm)의 가시광 영역까지 조절하였다. 변조된 광촉매는 PVC가 주성분인 벽지 코팅제와 농도별로 혼합하여 광화학반응을 위한 기능성 도료를 제조하였다. 이 도료를 사용하여 광촉매가 코팅된 기능성 벽지를 제조하였으며, 제조된 벽지의 광촉매 성능을 평가하였다. 반응모델 물질로 NO를 이용하여 촉매 조성, 반응물 농도, 벽지의 촉매 담지량, 반응시간에 따른 광 화학반응속도를 측정하였다. 그 결과 폐 자동차 촉매전환기의 추출용액으로 변조된 $TiO_2$의 광촉매 활성이 크게 증가하였음을 알 수 있었고 그 중에서도 P-25에 추출용액을 함침시킨 P-25(w)의 광촉매가 가장 우수한 광촉매활성도를 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.331-341
• /
• 1992

The purpose of this study was to measure the polymerization contraction stress of two types of composite resins; chemical cured type(Cliarfil F II, Kuraray, Japan) and photo-cured type(Photo-Clearfil Bright, Kuraray, Japan). The stresses of composite resin by contraction measured with specially designed measuring device(Fig. 1). The stresses caused by shrinkage during hardening of specimens were measured according to the type of composite resins, thickness of specimen(0.65, 1.30 and 1.95mm), and ratio of catalyst to base in case of only chemical cured composite resin(0.5, 1.0 and 1.5). As the composite resin specimen shrank on hardening, the load cell recorded force vs time automatically on pen-recorder(Toa, Japan) with a cross-head speed 60mm/hr at 0~10 voltages up to 2 hours. The experiments were conducted in a room maintained at $23{\pm}2^{\circ}C$ and relative humidity $50{\pm}10%$. The results were as follows. 1. The contraction stress during hardening was higher in photo cured composite resin than in chemical cured composite resin. 2. The contraction stress during hardening was increased with thickness of composite resin specimen. 3. In chemical cured composite resin, the polymerization contraction stress was decreased with ratio of catalyst and base. 4. The contraction stress during polymerization was higher in early time after insertion of photo cured composite resin and chemical cured composite resin.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.267.2-267.2
• /
• 2016

Semiconductor photo-catalysis offers the potential for complete removal of toxic chemicals through its effective and broad potential applications. Various new compounds and materials for chemical catalysts were synthesized in the past few decades. As one of the most important II-VI group semiconductors, zinc sulfide (ZnS) with a wide direct band gap of 3.8 eV has been extensively investigated and used as a catalyst in photochemistry, environmental protection and in optoelectronic devices. In this work, the ZnS films and nanostructures have been successfully prepared by wet chemical method. We show that the agglomerates with four successive scales are always observed in the case of the homogeneous precipitation of zinc sulfide. Hydrodynamics plays a crucial role to determine the size of the largest agglomerates; however, other factors should be invoked to interpret the complete structure. In addition, studies of the photocatalytic properties by exposure to UV light irradiation demonstrated that ZnS nanocrystals (NCs) are good photo-catalysts as a result of the rapid generation of electron-hole pairs by photo-excitation and the highly negative reduction potentials of excited electrons. A combination of their unique features of high surface-to volume ratios, carrier dynamics and rich photo-catalytic suggests that these ZnS NCs will find many interesting applications in semiconductor photo-catalysis, solar cells, environmental remediation, and nano-devices.

• 한국광물학회지
• /
• 제28권1호
• /
• pp.29-38
• /
• 2015

광석에서 순도 높은 금은을 추출하기 위해 사용된 청화법으로부터 시안이 유출되어 광석 내 존재하는 중금속들과 결합하여 다양한 형태의 시안화합물이 생성된다. 이러한 시안화합물은 난분해성 오염물질로서 인간을 포함한 생태계에 악영향을 끼친다. 결합력에 따라서 중금속과 결합한 시안화합물은 공유결합성 화합물(weak acid dissociable, WAD)과 착화합물(strong acid dissociable, SAD) 등으로 분류할 수 있다. 본 연구에서는 시안화합물의 존재 형태별 광촉매 산화 효율을 비교 평가하였다. 특히 자외선 LED 광원의 파장과 광촉매 표면 개질이 시안화합물의 분해에 미치는 영향을 살펴보았다. 실험 결과, 동일한 광촉매 산화 조건에서 자유 시안보다는 중금속과 결합한 시안화합물의 광산화 분해 효율이 떨어짐을 알 수 있었다. 그리고 자유 시안의 경우에는 짧은 파장에서 광촉매 산화가 효과적이었지만 중금속과 결합한 시안화합물의 경우에는 긴 파장에서 광산화 분해능이 더 높게 나타났다. 그리고 광촉매 표면 개질에 의하여 광촉매 산화 공정의 성능을 향상시킬 수 있음을 확인하였다.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.61-77
• /
• 2016

$NanoTiO_2$ was synthesized by ultrasonication assisted sol-gel process and subjected to iron doping and carbon-iron codoping. The synthesized catalysts were characterized by XRD, HR-SEM, EDX, UV-Vis absorption spectroscopy and BET specific surface area analysis. The average crystallite size of pure $TiO_2$ was in the range of 30 - 33 nm, and that of Fe-$TiO_2$ and C-Fe $TiO_2$ was in the range of 7 - 13 nm respectively. The specific surface area of the iron doped and carbon-iron codoped nanoparticles was around $105m^2/g$ and $91m^2/g$ respectively. The coupled semiconductor photo-Fenton's activity of the synthesized catalysts was evaluated by the degradation of a cationic dye (C.I. Basic blue 9) and an anionic dye (C.I. Acid orange 52) with concurrent investigation on the operating variables such as pH, catalyst dosage, oxidant concentration and initial pollutant concentration. The most efficient C-Fe codoped catalyst was found to effectively destruct synthetic dyes and potentially treat real textile effluent achieving 93.4% of COD removal under minimal solar intensity (35-40 kiloLUX). This reveals the practical applicability of the process for the treatment of real wastewater in both high and low insolation regimes.