• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2224-2226
• /
• 2000

In this paper, we tried to figure out the residual stress of Electroless Nickel (EN) films as a function of process conditions: bath temperatures, pH values, and hypophosphorous acid concentrations. The residual stresses of EN films were in the range of - 4 MPa to 250 MPa depending on process conditions and they were very sensitive to phosphorous concentration in EN film and also hypophosphorous acid concentrations in EN bath.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.795-804
• /
• 2007

Statement of problem. Nano-scale calcium-phosphate coating on the anodizing titanium surface using ion beam-assisted deposition (IBAD) has been recently introduced to improve the early osseointegration. However, not much is known about their surface characteristics that have influence on tissue-implant interaction. Purpose. This study was aimed to investigate microtopography, surface roughness, surface composition, and wettability of the titanium surface modified by the anodic oxidation and calcium phosphate coating using IBAD. Material and methods. Commercially pure titanium disks were used as substrates. The experiment was composed of four groups. Group MA surfaces represented machined surface. Group AN was anodized surface. Group CaP/AN was anodic oxidized and calcium phosphate coated surfaces. Group SLA surfaces were sandblasted and acid etched surfaces. The prepared titanium discs were examined as follows. The surface morphology of the discs was examined using SEM. The surface roughness was measured by a confocal laser scanning microscope. Phase components were analyzed using thin-film x-ray diffraction. Wettability analyses were performed by contact angle measurement with distilled water, formamide, bromonaphtalene and surface free energy calculation. Results. (1) The four groups showed specific microtopography respectively. Anodized and calcium phosphate coated specimens showed multiple micropores and tiny homogeneously distributed crystalline particles. (2) The order of surface roughness values were, from the lowest to the highest, machined group, anodized group, anodized and calcium phosphate deposited group, and sandblasted and acid etched group. (3) Anodized and calcium phosphate deposited group was found to have titanium and titanium anatase oxides and exhibited calcium phosphorous crystalline structures. (4) Surface wettability was increased in the order of calcium phosphate deposited group, machined group, anodized group, sandblasted and acid etched group. Conclusion. After ion beam-assisted deposition on anodized titanium, the microporous structure remained on the surface and many small calcium phosphorous crystals were formed on the porous surface. Nanoscale calcium phosphorous deposition induced roughness on the microporous surface but hydrophobicity was increased.

• 디지털융복합연구
• /
• 제12권5호
• /
• pp.491-500
• /
• 2014

본 연구는 카페인을 도포한 기능성 테이핑 유 무에 따른 고강도 훈련 시 피로물질 향상에 미치는 영향을 알아봄으로써 운동 수행시의 피로 및 경기 수행력 향상을 위한 수단으로서 카페인을 도포한 기능성 테이핑 효과에 대한 기초 자료를 제공하고자 남자 대학생 육상 단거리 선수 10명을 대상으로, 피로물질인 젖산, 혈중젖산탈수소효소(LDH), 무기인산의 3가지 혈중 성분을 분석한 결과 다음과 같은 결론을 얻었다. 첫째, 카페인을 도포한 기능성 테이핑을 적용한 그룹이 고강도 훈련그룹에 비해 젖산은 훈련 직후에 낮은 증가율을 보였다. 둘째, 카페인을 도포한 기능성 테이핑을 적용한 그룹이 고강도 훈련그룹에 비해 혈중젖산탈수소효소(LDH)는 훈련 직후에 낮은 증가율을 보였다. 셋째, 카페인을 도포한 기능성 테이핑을 적용한 그룹이 고강도 훈련그룹에 비해 무기인산은 훈련 직후에 낮은 증가율을 보였다. 이상의 결과와 같이 육상단거리 선수들에게 카페인을 도포한 기능성 테이핑을 적용한 그룹과 고강도훈련이 피로물질인 젖산, 혈중젖산탈수소효소(LDH), 무기인산에 긍정적인 방향으로 변화시킬 수 있는 방법이라는 것을 확인할 수 있었다.

• BMB Reports
• /
• 제32권1호
• /
• pp.6-11
• /
• 1999

To understand the function of phospholipids and their fatty acid composition on the morphological changes in the amp 1-4 mutant of Arabidopsis, the mutant was compared to the wild-type Arabidopsis by TLC, HPTLC, phosphorous assay, HPLC, and GC. In the mutant, phosphatidylethanolamine (PE) was increased 5-fold and phosphatidylglycerol (PG) was decreased 1.2-fold (nmol phosphorous/g tissue). Inositol phospholipids showed a generally increased trend ranging from 1.4-to 3.0-fold (nmol inositol/g tissue). When fatty acid composition of the mutant was compared to the wild-type, linoleic (18:2) and linolenic (18:3) acids of phosphatidylcholine (PC) and PG were decreased but palmitoleic acid (16:1) and oleic acid (18:1) of PC was increased 2.5- and 2.1-fold (mol%), respectively. In galactolipids, myristic acid (14:0) of monogalactosyl-diacylglycerol (MGDG) were increased 5.8-fold (mol%). Among the inositol phospholipids, lysophosphatidylinositol (L-PI) and phosphatidylinositol 4,5-bisphosphate ($PIP_2$) showed 4-and 1.9-fold (mol%) increase of 16:1, respectively. These results suggest that the increase of PE, the decrease of PG, the increase of inositol phospholipids, and the altered fatty acid composition are related to the phenotypic changes affecting the morphological features, and might cause different physiological changes in the amp 1-4 mutant compared to wild-type Arabidopsis.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.62-68
• /
• 2004

PU flame-retardant coatings (APHD) containing phosphorous were prepared by blending of hexamethylene diisocyanate-trimer, white pigment, dispersing agent, flowing agent, and previously prepared benzoic acid modified polyester (APTB) that contains phosphorous. Physical properties of the prepared APHD were examined. With the introduction of BZA (contained in APTB), the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210${\sim}$313 seconds, and in a $45^{\circ}$ Meckel burner method, shows 1.3${\sim}$4.0$cm^2$ of char length, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2002년도 총회 및 추계학술발표회
• /
• pp.62.1-62
• /
• 2002

• 한국세라믹학회지
• /
• 제12권2호
• /
• pp.26-30
• /
• 1975

The experiment has been carried out to clarify the condition of acid treatment for preventing the crack formation caused by swelling and shrinking during acid leaching process. The borosilicate glass contained phosphorous pentoxide was chosen as the sample, which is recognized to be more homogeneous in phase separation. The various effects, such as kind, cocentration and acid temperature, were investigated. The experimental results are summerized as follows. (1) Sulfuric acid is more stable than hydrochrolic acid for preventing the crack. (2) The optimum concentration of acid lies in the range of 0.1~0.3N. (3) Higher temperature of the acid to treat the separated glass was more stable than lower temperature. (4) The rate of crack decreased with the longer period and the higher temperature of the heat treatment.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.405-421
• /
• 1997

The main purpose of this study was to evaluate the acid resistance and antimicrobial effect of fluoride-laser combined application. Recently extracted third molars were used. $5{\times}3mm$ of the buccal and lingual specimens were exposed and incipient artificial carious lesions were formed by keeping them in the artificial cariogenic solution for 5 days. They were divided into five groups and treated with fluoride and laser according to the predetermined regimen. The acid resistance was compared between groups by chemical quantitative analysis of the calcium and phosphorous released into the test solution after single or combined application of fluoride and laser. The antimicrobial effect of each group was analyzed by counting the number of colony forming units after microbial incubation. The results from the present study can be summarized as follows; 1. Experimental groups showed lower values in calcium and phosphorous contents as well as in $CFU/m{\ell}$(colony forming units) than control group. Combined application groups showed lower values than single application groups. 2. Acid resistance and antimicrobial effect by fluoride and laser treatment were confirmed in this study. 3. Based upon the above-mentioned results of this study, it can be assumed that the use of laser-fluoride combined application may provide the child and adolescent patient population with antimicrobial effect as well as acid resistance. Further studies using various materials and experimental conditions are being encouraged.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1678-1686
• /
• 2021

본 연구에서는 가교제인 붕산과 아크릴 수지 바인더에 삼인산(3 인산), 피트산(6 인산) 또는 폴리인산암모늄(10 인산)을 혼합하여 인계 난연 코팅액을 제조하였다. 제조된 인계 난연 코팅액을 부직포에 각각 코팅하여 높은 난연 효과를 얻었다. 이렇게 제조된 난연성 부직포를 연기밀도기준시험(ASTM E662), 산소한계지수기준시험(ISO E622), 수직연소기준시험(UL 94)을 이용하여 평가하였다. 그들의 난연 효과는 phosphate 그룹의 수에 의해 영향을 받았으며, 천연 또는 합성 바인더 수지에 관계없이 그 효과는 ammonium polyphosphate > phytic acid > triphosphate의 순서로 나타났다. 천연 탄화수소 화합물도 바인더 수지의 난연성을 결정하기 위해 조사되었다. 그 결과 천연 탄화수소 바인더 수지가 난연성 부직포 제조에 사용될 수 있음을 보여주었다.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.147-156
• /
• 2003

풀러렌[$C_{60},\;C_{70}$]을 benzoylperoxide, trichloroisocyanuric acid, methyltrioxorhenium(VII), iodosobenzene 그리고 phosphorous pentoxide 등의 산화제를 사용하여 상온, 초음파 조건에서 풀러렌 산화물을 제조하였다. MALDI-TOF MS, UV-VIS 그리고 HPLC를 사용하여 분석한 결과 생성된 풀러렌 산화물은 [$C_{60}(O)_n$], ($n=1{\sim}3$ 또는 n=1)과 [$C_{70}(O)_n$], ($n=1{\sim}2$ 또는 n=1)임을 알 수 있었다. 한편, 동일한 실험 조건에서 $C_{60}$ 반응속도는 $C_{70}$ 보다 높았다.