• Macromolecular Research
• /
• 제15권6호
• /
• pp.565-574
• /
• 2007

In this study, five representative, commercially available polymers, Ultem 1000 polyetherimide, Kapton polyimide, phenolic resin, polyacrylonitrile and cellulose acetate, were used to prepare pyrolyzed polymer membranes coated on a porous {\alpha}-alumina$ tube via inert pyrolysis for gas separation. Pyrolysis conditions (i.e., final temperature and thermal dwell time) of each polymer were determined using a thermogravimetric method coupled with real-time mass spectroscopy. The surface area and pore size distribution of the pyrolyzed materials derived from the polymers were estimated from the nitrogen adsorption/desorption isotherms. Pyrolyzed membranes from polymer precursors exhibited type I sorption behavior except cellulose acetate (type IV). The gas permeation of the carbon/{\alpha}-alumina$ tubular membranes was characterized using four gases: helium, carbon dioxide, oxygen and nitrogen. The polyetherimide, polyimide, and phenolic resin pyrolyzed polymer membranes showed typical molecular sieving gas permeation behavior, while membranes from polyacrylonitrile and cellulose acetate exhibited intermediate behavior between Knudsen diffusion and molecular sieving. Pyrolyzed membranes with molecular sieving behavior (e.g., polyetherimide, polyimide, and phenolic resin) had a $CO_2/N_2$ selectivity of greater than 15; however, the membranes from polyacrylonitrile and cellulose acetate with intermediate gas transport behavior had a selectivity slightly greater than unity due to their large pore size.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.194-205
• /
• 2005

The network structure of Ni-coated carbon black (NCB) composites filled with phenolic resin was investigated by means of using scanning electron microscopy, viscosity, interfacial tension, shrinkability, Flory-Huggins interaction parameters, and swelling index. The electrical properties of the composites have been characterized by measurement of the specific conductivity as a function of temperature. Additionally, the variation of conductivity with temperature for the composites has been reported and analyzed in terms of the dilution volume fraction, relative volume expansion, and barrier heights energy. The thermal stability of phenolic-NCB composites has been also studied by means of the voltage cycle processes. The experimental data of EMI wave shielding were analyzed and compared with theoretical calculations. The mechanical properties such as tensile strength, tensile modulus, hardness and elongation at break (EB) of NCB-phenolic resin composites were also investigated.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3249-3253
• /
• 2014

A novel triazole-functionalized phenolic resin was developed, and its thermal and flame-retardant properties were investigated. The triazole group was incorporated as a pendant unit on the phenolic resin via copper-mediated click chemistry between propargylated phenolic resin and benzyl azide. The newly-developed triazole-functionalized phenolic resin showed higher thermal stability and char yield, together with a reduced total heat release (THR), than the non-functionalized bare phenolic resin, indicating enhanced flame retardancy for the triazole-functionalized phenolic resin.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.14-22
• /
• 2007

본 연구에서는 페놀수지의 열안정성 그리고 glass braid/페놀수지 복합재료의 동역학적 열특성에 미치는 유리분말 및 액상 니트릴고무(NBR)의 영향을 열중량분석기와 동역학적 열분석기를 이용하여 조사하였다. 수용성 페놀수지에 충진된 유리분말과 NBR은 페놀수지의 열안정성과 복합재료의 저장탄성률 그리고 tan ${\delta}$ 변화에 중요한 영향을 미쳤다. 유리분말의 충진은 페놀수지의 열안정성을 향상시키는 반면, NBR의 존재는 특정 온도영역에서 페놀수지의 중량감소를 초래하였다. 충진제의 유 무에 따른 페놀수지의 열안정성은 경화온도뿐만 아니라 경화시간에도 의존하였다. 스트립형태의 glass braid/페놀수지 복합재료의 저장탄성률과 tan ${\delta}$의 변화는 유리분말과 NBR이 혼합된 매트릭스의 도입과 경화조건에 의해 크게 영향을 받았다.

• 접착 및 계면
• /
• 제6권4호
• /
• pp.12-17
• /
• 2005

Natural fiber/phenolic biocomposites with chopped henequen fibers treated at various levels of electron beam irradiation (EBI) were made by means of a matched-die compression molding method. The interfacial property was explored in terms of interfacial shear strength measured by a single fiber microbonding test. The thermal properties were studied in terms of storage modulus, tan ${\delta}$, thermal expansion and thermal stability measured by dynamic mechanical analysis, thermomechanical analysis and thermogravimetric analysis, respectively. The result showed that the interfacial and thermal properties depend on the treatment level of EBI done to the henequen fiber surfaces. The present result also demonstrates that 10 kGy EBI is most preferable to physically modify the henequen fiber surfaces and then to improve the interfacial property of the biocomposite, supporting earlier results studied with henequen/poly (butylene succinate) and henequen/unsaturated polyester biocomposites.

• 폴리머
• /
• 제24권1호
• /
• pp.8-15
• /
• 2000

본 연구에서는 초임계 이산화탄소를 반응 연속상으로 하여 졸-에멀젼-겔 방법에 의한 신합성 공정을 통해 1-6 $\mu\textrm{m}$의 평균 입자 크기를 갖는 페놀릭/퍼퍼랄(phenolic/furfural, P/F) 겔 입자를 성공적으로 제조하였다. 이때 초임계 이산화탄소에 잘 녹는 폴리디메틸실록산(poly-(dimethylsiloxane), PDMS)은 초임계 이산화탄소내에서 P/F 용액을 분산시키는 효과적인 안정제로 사용되었다. 입자 크기와 입자 크기 분포에 미치는 영향을 알아보기 위하여 고형분과 안정제 함량비를 변화시켜 실험한 결과, P/F 입자의 평균 입자 크기는 고형분의 함량비가 증가함에 따라 증가했으나, 안정제의 함량비에 따른 변화는 크지 않았다. 또한 P/F 겔 입자의 구조 및 열 안정성은 IR 분석과 TGA를 통해 확인하였다.

• Advances in materials Research
• /
• 제3권3호
• /
• pp.175-183
• /
• 2014

Natural rubber bound phenolic antioxidant, 2,6-di-tert-butyl-4-vinylphenol (2,6-DBVP), was prepared from natural rubber and 2,6-DBVP in both solution and melt state. The 2,6-DBVP had been synthesized from 3,5-di-tert-butyl-4-hydroxybenzaldehyde and methyltriphenylphosphonium iodide ($MePPh_3I$) by Wittig reaction ($0^{\circ}C$ for 2 hrs, $N_2$ atmosphere). The conditions for preparation of natural rubber bound 2,6-DBVP (NR-DBVP) were optimized for both solution state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 2 hrs) and for melt state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 10 mins, with rotor speed of 60 rpm). A thermoplastic vulcanizate was obtained using a compatibilizer, polypropylene modified with phenolic resin (PhHRJ-PP), in a closed mixer ($180^{\circ}C$ for 3 mins, rotor speed 60 rpm). The antioxidant properties of vulcanized NR-DBVP, using phenolic as the vulcanization system, were similar to NR with the conventional antioxidant BHT. In addition, the antioxidant, water leaching property of the thermoplastic vulcanizate of NR-DBVP/PP were good in comparison to a NR blend with BHT; the morphologies of these thermoplastic vulcanizates were similar.

• 폴리머
• /
• 제37권2호
• /
• pp.156-161
• /
• 2013

페놀계 산화방지제는 가공 및 사용 시 열분해를 방지함으로써 뛰어난 열 안정성을 제공하는 대표적인 1차 산화방지제이다. 그러나 NOx 가스를 포함한 특정 환경에 의해 황변이 일어나기 쉽기 때문에 2차 산화방지제를 추가로 도입하여 시너지효과를 기대하는 경우가 많다. 열에 취약한 비결정성 폴리알파올레핀 수지(APAO)에 여러 가지 페놀계 1차 및 2차 산화방지제를 도입하여 황변 여부를 조사한 결과 2차 산화방지제의 함량이 증가할수록 황변이 줄어들었으며 BHT와 같은 단순 구조의 폐놀계 산화방지제보다 긴 알킬 사슬을 도입시켜 입체장애효과를 증대시킨 산화방지제가 2차 산화방지제와의 시너지 효과가 더 큰 것으로 확인되었다.

• 한국재료학회지
• /
• 제7권10호
• /
• pp.838-844
• /
• 1997

폴리아크릴로나트릴(PAN)계 탄소섬유 및 안정화 PAN섬유를 사용하여 제조한 페놀수지 복합재료의 열주기 산화저항성에 섬유표면의 인산코팅 유.무가 미치는 영향을 조사하였다. 각 복합재료의 열주기 산화저항성은 열중량분석기의 원리를 응용하여, 공기중에서 hot zone과 cold zone을 주기적으로 반복이동하는 열충격조건에 노출되면서 초래되는 복합재료의 중량변화를 측정하여 비교하였다. 시험변수로는 hot zone에 노출된 온도, 시간 및 싸이클횟수를 선정하였다. 이 시험방법은 비교적 단순하며, 작은 크기의 시편으로도 가능하고, 중량변화가 온-라인 모니터에서 직접 감지되므로 데이타의 신뢰성이 \ulcorner다. 각 시험조건에서 인산코팅한 섬유를 사용한 복합재료가 그렇지 않은 재료보다 고온에서의 높은 산화저항성 때문에 우수한 열주기저항성을 보여 주었다. 또한 인산코팅의 존재 여부가 열주기시험 후의 탄소섬유-페놀수지 및 안정화 PAN섬유-페놀수지 복합재료의 미세구조에 미치는 영향을 조사하였다.